• Journal of Biosystems Engineering
• /
• 제20권3호
• /
• pp.205-216
• /
• 1995

A fast and inexpensive approximate analysis method to predict power output characteristics of the Stilting engines in a preliminary design stage was investigated. In basic equations proposed by Walker, typical temperatures of working fluids in expansion and compression spaces were treated as those of working fluids in heater and cooler respectively. While the temperature of working fluid in the expansion space was actually lower than that of working fluid in the heater, the temperature of working fluid in the compression space was higher than that of working fluids in the cooler. In this paper, the working fluid temperature of expansion space was treated as lower than the heater temperature and that of compression space was treated as higher than the cooler temperature. Also, according to them, the power output characteristics of the Stirling engine were evaluated with respect to the GPU-3 and 4-215 Stilting engines. The following conclusions were drawn from the analysis. 1. Using the available experimental data from the GPU-3 Stirling engine, it was shown that the approximate analysis predicts the brake power with a maximum error of 19 percent at 1, 000rpm and with a minimum error of 3 percent at 2, 000rpm. 2. The approximate analysis data which for the GPU-3 Stirling engine were much closer to the experimental data than those of adiabatic 2nd order and 3rd order analysis within 1, 500rpm to 2, 500rpm. 3. The approximate analysis data which for the GPU-3 and 4-215 Stilting engines were much closer to the experimental data than those of the Beal number analysis.

• Journal of the Korean Wood Science and Technology
• /
• 제25권2호
• /
• pp.75-80
• /
• 1997

This research has been examined to measure the degree of the fiber damage of ozonenation high yield pulp in the beating process. Ozone treated the TMP(Thermomechanical Pulp) and CTMP(Chemithermomechanical Pulp) of spruce and the CTMP of birch has been beaten to be reached 200ml(freeness) of its content. It had been studied the forming of fiber distribution by treatment for long fiber, short fiber, fine with the above method. As ozone treatment time gets longer, the pulp has showed the tendency of increasing the fiber content of 28, 48mesh. Ozone treated fiber has been increased long fiber content by being added softness. By given longer ozone treatment time, the TMP and CTMP of spruce has showed the decreasing of fiber content. On the contrary, CTMP of birch has showed the increasing its fiber content. It had proved that the results of difference are rather closer to the species of tree than closer to the kinds of pulp. The fiber content of over 200mesh which has created in beating process demonstrates the decreasing of its fiber content by getting longer ozone treatment time. The softness of fiber can be extracted by the lignin of fiber surface that had been formed by ozone treatment. Thus we assume that the fiber in the process of beating obtains less physical damage.

• 수산경영론집
• /
• 제31권2호
• /
• pp.27-45
• /
• 2000

This study discusses the development structure of China's Marine Fisheries in the East China Sea. China's marine fisheries have developed since the 1980s along with it's economic expansion. The total catch in the East China Sea has increased especially during the 1990s. The Chinese fishery has developed remarkably through individual management, expansion of their fishing grounds from inshore to off-shore, and increase of the catch in both pelagic and bottom species. In other words, the trawl fishery in China has led to higher production. We can say that the progress in Chinese fisheries is the result of their expansion policy. Their boats have been coming closer and closer to the Japanese and Korea fishing grounds during the 1990s. Chinese fisheries is exploiting the low cost and thus strengthening its quantity. Based on rising fish price, expanding domestic fish markets as well as expels, China is enjoying the high income. However, in trawl fishery, productivity is stagnant and profit is going down due to the rising cost. In accordance with the new 200 mile EEZ system in the East China Sea, China's fisheries will be restricted mostly by the new regulation which requires the reduction of fishing efforts and the application of resource management.

• 한국의류학회지
• /
• 제33권5호
• /
• pp.741-751
• /
• 2009

In order to design and develop the various silhouette of pants pattern for standardized pants patterns, this study is to classify the pants style by the silhouette and to characterize each pants pattern which are classified. Recent 37 ready-made pants patterns of various style were collected in order to analyze their silhouette from April to July 2007. Measurement of each region of the pants pattern were compared and analysed. After analyse the standard deviation, coefficient of variance, minimum, maximum, range about the measurement of each region of the pants pattern, major pattern design factors were extracted. Five major factors are the angle of center front line and center back line, the crotch extension, the position of center back line against center front line, the curvature of center back line, and amount of waist dart. As a result, pants style were grouped as the culottes, formal, basic and tight style after considering the extracted design factors, and analysing correlation, degree of dispersion of the measurement by part. As the silhouette of pants classification from culotte to tight, the fits are closer to the figure, crotch depth increases, crotch extensions are shorter, and angle of the center back increases. The shape of the connected front and back center lines is U-shape for culotte and is closer to V-shape as the silhouette becomes tight.

• 대한치과교정학회지
• /
• 제24권3호
• /
• pp.709-719
• /
• 1994

The aim of this investigation was to identify which suing is more suitable for uprighting of the 30 degree inclined lower second molar in different situations. Between four different molar uprighting springs which were A, B, C type and T-loop spring, the author tested T-loop suing as a control material and the other springs were experimental group. Each spring was fabricated from .017' $\times$ .025' TMA wire and preactivated with 40 degree tip-back bend. Stabilizing unit included from the lower right central incisor to the lower right second premolar which were made by acrylic resin. The photoelastic overview of the lower right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows. 1. Higher concentration of compression can be seen clearly at the distal curvature than the mesial of the lower second molar when A type uprighting spring was applied, which can be used as a space regainer. 2. Higher level compression was presented at the mesial root apex area than the distal of the lower second molar in B type uprighting spring, which can be used as a space closer. 3. Areas of higher compression and tension were observed about the mesial and distal root of the lower second moalr than A and B type in C type uprighting spring, which can be used as a partial space regainer.

• 한국환경과학회지
• /
• 제26권3호
• /
• pp.373-380
• /
• 2017

This study identified the effect of changes in the riverbed on the benthic macroinvertebrate communities. The benthic macroinvertebrates collected from the surveyed sites belonged to 119 species, 65 families, 20 orders, and 7 classes in 4 phyla. The number of Ephemeroptera, Plecoptera, and Trichoptera (E.P.T) species was 42, 10, and 8, respectively, in the tributary, confluence, and Nakdong River sites. Lotic species (Hydropsychidae) showed a high density at the tributary sites, whereas lentic species (Chironomidae) showed a high density at the confluence and Nakdong River sites. Community analysis showed that the Dominance Index (DI) was 0.54 in tributary sites, and dominance indices increased closer to the Nakdong River sites. The diversity index (H') was inversely proportional to DI. The ratio of Burrowers species (BU) at the surveyed sites increased closer to the Nakdong River sites. Analysis of common species showed 37 species (34.6%) between the tributary and confluence sites and 66 species (51.5%) between the confluence and Nakdong River sites.

• Geomechanics and Engineering
• /
• 제9권3호
• /
• pp.275-286
• /
• 2015

A new method is presented to recover missing deformation data of lateral walls of foundation pit when the monitoring is interrupted; the method is called Dynamic Mathematical Model - Parameter Interpolation. The deformation of lateral walls of foundation pit is mainly affected by the type of supporting structure and the situation of constraints, therefore, this paper mainly studies the two different kinds of variation law of deep horizontal displacement when the lateral walls are constrained or not, proposes two dynamic curve models of normal distribution type and logarithmic type, deals with model parameters by interpolating and obtains the parameters of missing data, then missing monitoring data could be Figured out by these parameters. Compared with the result from the common average method which is used to recover missing data, in the upper 2/3 of the inclinometer tube, the result by using this method is closer to the actual monitoring data, in the lower 1/3 part of the inclinometer tube, the result from the common average method is closer to the actual monitoring data.

• 대한원격탐사학회지
• /
• 제38권1호
• /
• pp.33-43
• /
• 2022

This study presents a method to restore an optical satellite image with distortion and occlusion due to fog, haze, and clouds to one that minimizes degradation factors by referring to the same type of peripheral image. Specifically, the time and cost of re-photographing were reduced by partially occluding a region. To maintain the original image's pixel value as much as possible and to maintain restored and unrestored area continuity, a simulation restoration technique modified with the Cycle Generative Adversarial Network (CycleGAN) method was developed. The accuracy of the simulated image was analyzed by comparing CycleGAN and histogram matching, as well as the pixel value distribution, with the original image. The results show that for Site 1 (out of three sites), the root mean square error and R² of CycleGAN were 169.36 and 0.9917, respectively, showing lower errors than those for histogram matching (170.43 and 0.9896, respectively). Further, comparison of the mean and standard deviation values of images simulated by CycleGAN and histogram matching with the ground truth pixel values confirmed the CycleGAN methodology as being closer to the ground truth value. Even for the histogram distribution of the simulated images, CycleGAN was closer to the ground truth than histogram matching.

• 한국방재학회 논문집
• /
• 제9권5호
• /
• pp.57-62
• /
• 2009

경사면에서의 지표 연소물질에 대한 화염확산은 경사각변화에 따라 화염이 경사면과 가까워져 열전달이 많이 이루어져 확산이 빠르게 이루어진다. 기존 연구에서는 경사면에 대한 화염각 변화를 고려하지 않고 일반적으로 경사각의 기울어짐으로 인해 화염이 그 만큼 지표면과 가까워지는 것을 적용하였다. 따라서 본 연구에서는 경사면에서의 실제 화염의 성상에 대해 실험하였다. 그 결과 경사에 따른 화염기울기 산정식을 제안 하였고 경사조건에서의 화염기울기와 화염확산속도와의 관계에 대해 기술하였다.

• 대한안전경영과학회지
• /
• 제23권2호
• /
• pp.9-17
• /
• 2021

As interest in vocational competency development projects increases, support is increasing. In this study, in order to study ways to improve participation in vocational competency development training, related factors are selected and the main factors influencing them are derived. The main factors were influencing factors were identified and ways to improve participation rate of vocational competency development were studied. Variables were selected through prior research, and data were collected and analyzed through in-depth group interviews. Based on factor analysis and reliability analysis, as a result of confirming the factors that influence the plan for improving participation in vocational competency development training by applying the backward stage selection (condition) method of logistic regression analysis, the case of respect for minorities in the 7-point Likert scale The closer to 7 was, the higher the probability of being classified as having never participated, and the other factors except minority respect, Likert scale closer to 7 indicates higher probability of bening classified as having never participated, except for the minority respect factor. Therefore, it was confirmed that lowering the scale of the factor of respect for minority, which is job satisfaction, and increasing the factors of individual characteristics such as annual salary and organizational commitment, training system for job satisfaction, and quality assurance have effects on improving participation rates in vocational competency development training.