• Tribology and Lubricants
• /
• v.37 no.1
• /
• pp.7-13
• /
• 2021

Ball bearing is a device that supports and transmits a load acting on a rotating shaft, and it is a type of rolling bearings that uses the rolling friction of the balls by inserting balls between the inner ring and the outer ring. Grease, which is prepared by mixing a thickener with a base oil, is a lubricant commonly used in bearings and has the advantage of a simple structure and easy handling. Bearings are increasingly being used in high value-added products such as semiconductors, aviation, and robots in the era of the 4th industrial revolution. Accordingly, there is an increasing demand for bearing grease. The selection of grease is an important factor in the bearing design. Therefore, a study must be conducted on the grease life evaluation to select an appropriate grease according to operating conditions such as a high temperature, high rotational speed, and high load. In this study, we evaluate the life of ball-bearing grease according to various operating conditions, namely, temperature, speed, and load changes. For this, we develop and theoretically verify a grease life test machine for ball bearings. We conduct a life test of grease according to various operating conditions of bearings and predict the grease life with a 10% and 50% failure probability using the Weibull analysis. In addition, we analyze the oxide characteristics of the grease over time using the Fourier transform infrared spectroscopy and the deterioration characteristics of the grease using the carbonyl index.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.7
• /
• pp.2209-2224
• /
• 2022

The Internet of Things (IoT) is being used in a wide variety of fields due to the recent 4th industrial revolution. In particular, research is being conducted that combines IoT with the medical field such as telemedicine. Among them, the field of shock detection is a big issue in the medical field because the causes of shock are diverse, treatments are very complex, and require a high level of medical knowledge and experience. The transmission of infectious diseases is common when treating critically ill patients, especially patients with shock. Thus, to effectively care for shock patients, we propose an architecture that continuously monitors the patient's condition, and automatically recommends a drug injection treatment according to the patient's shock condition. The patient's hemodynamic information is continuously monitored, and the patient's shock generation information is recorded periodically. With the recorded patient information, the patient's condition is determined and automatically injected with necessary medication. The medical team can find out whether the patient's condition has improved by checking the recorded information through web applications. The study can help relieve the shortage of medical personnel and help prevent transmission of infectious disease in medical staff. We look forward to playing a role in helping medical staff by making recommendations for the diagnosis and treatment of complex and difficult shocks.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.1
• /
• pp.34-42
• /
• 2019

Receiving great attention of IoT and 4th industrial revolution, the necessity comes to the fore of the plant system which aims making it smart and effective. Smart Factory is the key realm of IoT to apply with the concept to optimize the entire process and it presents a new and flexible production paradigm based on the collected data from numerous sensors installed in a plant. Especially, the wireless sensor network technology is receiving attention as the key technology of Smart Factory, researches to interface those technology is actively in progress. In addition, IoT devices for plant industry security and high reliable network protocols are under development to cope with high-risk plant facilities. In the meanwhile, Blockchain can support high security and reliability because of the hash and hash algorithm in its core structure and transaction as well as the shared ledger among all nodes and immutability of data. With the reason, this research presents Blockchain as a method to preserve security and reliability of the wireless communication technology. In regard to that, it establishes some of key concepts of the possibility on the blockchain based IoT Edge devices for Plant O&M (Operations and Maintenance), and fulfills performance verification with test devices to present key indicator data such as transaction elapsed time and CPU consumption rate.

• Journal of Information Technology Services
• /
• v.18 no.1
• /
• pp.63-78
• /
• 2019

Despite the government's efforts, the jobs in SW industry are not easily created and only many problems of unemployment have been pointed out, failing to solve the basic problem. Sustainable decent jobs were recognized as a national task. Emotional connection between things and people is the SW industry, which is a core industry of the 4th industrial revolution. In order to be globally competitive, SW job creation, manpower planning for generating core human resources and highly educated manpower is a necessary issue. Basic estimation of job creation using the Input Output Table by Bank of Korea has some limitations and did not consider the SW industry characteristics. This study proposes an assessment model of SW policies and the practices a case of assessment of 113 projects supported by the Korean government. We propose a flowchart that can divide the government budgets according to the portion of the direct investment for SW industry by introducing investment types. We use an adjusted Input Output Table for SW industry and the model also considers the effect of SW promotions and regulations effects. This model can be used practically and flexibly by adjusting the SW fusion areas portions. It also considers the characteristics of the project, supporting areas, project size, short-term and long-term types. 113 projects of 'MSIT', 'SMBA' and 'NIPA' were analyzed and classified into 'policy' and 'business' to reflect SW job creation effect model considering domestic SW characteristics. By analyzing the practical data, 47,254 jobs are expected to be created within five years in optimistic cases and 27,211 jobs would be created in pessimistic cases.

• Korean Security Journal
• /
• no.57
• /
• pp.277-301
• /
• 2018

Korean society is a mixed risk society in terms of risk and distrust. This is because the risks and disasters of the farming and industrial societies, the modern and the information society, exist simultaneously in the present time. Ulrich Beck's point that the endless development of science and technology to acquire economic wealth is simultaneously entering a risk society is providing us with many implications. In this paper, we reviewed the Ulrich Beck's "reflexive modernization" theory in the late 20th century, pointing to the rise of a risk society as a result of the evolution of new modernization. This is because the "reflexive modernization" can be a direction in which we can reflect our wrong past from a human-centered perspective and design a desirable future. In this sense, it is important to present ways to overcome the dangerous society through the reinterpretation of Ulrich Beck, who advocated the modernization of reflectively. In order to overcome the future risks that the fourth industrial revolution will bring, we must provide direction for the government's security policies and public security consciousness.

• Journal of Engineering Education Research
• /
• v.24 no.5
• /
• pp.3-14
• /
• 2021

This study deals with the case of online-based project learning, which was designed for the purpose of university educational innovation and enhancing learners' competencies required by society, operated during the COVID-19 pandemic. The course was applied Python programming language, team-based project learning, and intensive course system, which is required by our society and companies in the era of the 4th industrial revolution. Also it was operated as a non-face-to-face online class, which would have been operated in an offline class if it had not been for Covid 19 pandemic, to explore the possibilities and educational effects of online learning. To do this, 32 university students participated in online-based project learning during 8 weeks, and then conducted a survey. The survey results were analyzed in terms of i) non-face-to-face online learning, ii) team-based project learning, and iii) application of the intensive course system. Results say that most of the learners were satisfied with the online learning, team-based project learning, and the intensive semester system applied in this course at a high level, and also they clearly presented the reasons. Thereby, it has been confirmed that the learners were already well aware of the pros and cons of each learning method. Based on these results, the implications were discussed.

• Journal of Engineering Education Research
• /
• v.1 no.1
• /
• pp.80-85
• /
• 1998

Yak-yong Jung discussed technology for the first time in Korea, 195 years ago, in his [Ki-ye-lon](the Theory of Techne: 1802) in which he investigated the essence and the developmental aspect of technology and the ways to promote technology. As a man of the 19th century when the West was being transformed into an industrial society by the Industrial Revolution, Jung suggested various ways to reform his nation an agricultural society. Although they were not accepted by the Dynasty, consideration of the social and economic situation and the world history at that time shows that they were very innovative. This study aims at defining Jung's view of technology, centering around [Ki-ye-lon](the Theory of Techne), and discusses what the technological education should emphasize in the future, that is to say: mathematical and scientific principles, the utility of technology, its developmental aspect, technological policy.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.5
• /
• pp.616-630
• /
• 2018

This study analyzed the current status of registered patents related to food tech in Korea and Japan. Using the patent information search services of Korean and Japanese Patent Offices, patents registered during the past 10 years from January 1, 2005 to December 31, 2015 were searched with the following key words/phrases: "food or meal or diet" and "program or information system". A total of 669 patents (539 for Korea and 130 for Japan) were finally selected and analyzed. Based on Porter's value chain theory, the patents were categorized into three dimensions related to "manufacturing/processing/distribution", "sales & marketing", and "consumer support". The results showed that in Korea, 41.7% of the total patents were related to sales & marketing followed by consumer support (37.3%) and manufacturing/processing/distribution (21.0%). In Japan, patents related to consumer support accounted for 56.2% followed by manufacturing/processing/distribution (32.3%), and sales & marketing (11.5%). In the area of manufacturing/processing/distribution, "food quality management system" in Korea, and "food manufacturing and processing management system" and "food safety control and hazard analysis system" in Japan tended to show a significantly higher proportion of patents registered (p<.05). Under sales & marketing, patents in the categories of "food purchase and delivery service system" in Korea and "restaurant information sharing system" in Japan tended to be more frequently registered (p<.05). Finally, in the area of consumer support, "kitchen facility and cooking device control system" in Korea and "menu and nutrition management system" in Japan tended to account for a significantly higher proportion of patents registered (p<.001). The results are expected to provide useful insights into the development of new patents and markets for food tech in the future.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.3
• /
• pp.113-120
• /
• 2020

Purpose : The purpose of this study is to investigate creative confluence competency of occupational therapy students and to understand the correlations between five sub-elements of creative confluence competency. Methods : The subjects of this study were 132 occupational therapy students. The data collection period was from February 12, 2020, to February 28, 2020. A Google questionnaire was used to collect data through SNS; 16 data with insufficient responses were excluded, and 116 data were finally analyzed. The collected data was processed using SPSS 21.0. The data were analyzed using descriptive statistics, t-test, ANOVA, Scheffe's test and Pearson's correlation coefficient. Results : The mean scores for creative confluence competency of the occupational therapy students is as follows: Creative ability 3.12±.58, creative personality 3.29±.55, creative leadership 3.50±.53, convergent thinking 3.23±.57, confluent value creation 3.04±.59. Occupational therapy students' creative leadership competence was highest, and confluent value creation competence was lowest. The average score of creative confluence competency of occupational therapy students was 3.12±.58, and the Cronbach' α value of the creative confluence competency was .97, which was very reliable. There was a positive correlation between the five sub-elements of creative confluence competency. Conclusion : The data in this study are related to efforts to improve occupational therapy students' creative confluence competency and prepare for convergence education. And It is expected to be used as basic data for the development of occupational therapist competency to prepare for the 4th industrial revolution.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.376-378
• /
• 2021

According to the 2020 Global Climate Report released by the World Meteorological Organization, the average temperature of the Earth in 2019 was measured 1.1℃ higher on average than the temperature measured between 1850 and 1900 before industrialization. The change in average temperature affects the distribution of plants, and according to the vulnerability analysis paper, it can be seen that there is a change in the distribution area of plants when the average temperature rises. In this paper, to cope with these environmental changes, we propose a method of fabricating intermittent flow hydroponic smart farms using Arduino and sensors and controlling them through PCs and applications. The manufactured hydroponic smart farm identifies the farm's temperature and humidity, positive pH concentration, illumination, and water quality to check the amount of pumping, supplement LED control, sensor condition, overall management and cultivation of the farm, and grows in an appropriate environment.