• The Journal of the Petrological Society of Korea
• /
• v.9 no.3
• /
• pp.142-168
• /
• 2000

The granites distributed in the Kyongsang basin contain the rocks which are different from the host rocks, and they are known as magic microgranular enclaves. The genesis of the magic micro-granular enclaves can be divided into four types: (1) rock fragments from country rocks; (2) cumulation of the early crystals in host magma or disruption of early chilled borders; (3) magma mingling; and (4) restite. These enclaves can be easily found in the granites around Mt. Wonhyo, Yangsan city. They are ellipsoidal in shape, and have phenocrysts might be originated from the host rocks and sharp contacts with the granites. Under the microscope, textures such as oscillation zoning, horn-blende-mantled quartz, rapakivi texture, and acicular apatite are observed, and these indicate that the enclaves were originated from magma and then produced by chilling. The evidences showing that the enclaves were formed by magma mingling are: (1) petrographical characteristics; (2) similarity of the compositions between the rim of plagioclase in the enclave and plagioclase in the granite; (3) linear trends of the major elements; (4) total REE content of the enclaves; and (5) Textural and compositional variations from rim to core in zoned enclaves. The magic end member of the enclave is regarded as the aphyric basaltic andesite in Mt. Sinbul-Youngchui area. The granites around Mt. Wonhyo experienced the magma mingling process which was produced by the injection of mafic magma at about 70 Ma, during the crystal differentiation, and then continued the crystallization. The equigranular granites and the micrographic granites in the study area are considered as the results after the magma mingling process.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.3_4
• /
• pp.138-156
• /
• 2002

Precambrian metamorphic rocks of southwest Sobaeksan massif consist of mainly granitic gneiss, porphyroblastic gneiss and quartzofeldspathic gneiss. The orthopyroxene-bearing rocks(charnockites) are found in the west of Hadong-Sancheong anorthosite complex. The charnockites are 3km wide, 12km long and divided into massive and foliated types based on their texture. The compositions of charnockites are comparable to granodiorite to adamellite and subalkaline. Variations in major and trace elemental abundances show typical magmatic differentiation trends. The geochemical data plotted on tectonic discrimination diagrams reveal that these charnockites were formed in the active tectonic environment. The massive and folidated charnockites are mainly composed of plagioclase, orthopyroxene, microcline, quartz and disseminated garnet. Camels generally show characteristic zonal textures with decreasing $X_{alm}$(0.74~0.83), $X_{Py}$ (0.07~0.12) and $X_{Mg}$ (0.12~0.08) and increasing $X_{grs}$(0.03~0.15) from core to rim. Metamorphic temperature and pressure of the charnockites estimated from orthopyroxene-garnet-plagioclase-quartz assemblages show wide range of variation of $600~900^{\circ}C$ and 2.5~7.5 kbar respectively. The results of P-T estimates indicate an anticlockwise P-T evolution path.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.3
• /
• pp.161-177
• /
• 2004

The Cretaceous pink granites of the finan area, southwestern Ogcheon belt, are adjacently developed in the eastern part (Keg) and western part (Kwg) as stocks, respectively. Keg of rounded shape occur as mainly medium-coarse grained rocks, whereas Kwg of ellipsoidal shape occurs as medium-coarse grained ones with partly porphyritic and fine-grained textures. Miarolitic cavities of them are often seen and can be observed more frequently in Kwg than Keg. Rose and counter fracture diagrams of the two granites show that Keg and Kwg have more potentiality of non-dimension and dimension to non-dimension stones, respectively. Physical properties such as porosity and absorption ratio have 0.25% and 0.65％, and 0.43% and 1.11%, respectively, which could suggest that emissions of gas phase at later magma stages are abundant in Kwg than those of Keg. From the major and trace elements petrochemisoy, they belong to acidic, peraluminous and calc-alkaline rocks, showing that Kwg are later product than Keg of the same granitic parent magma. REE concentrations normalized to chondrite value have trends of gradual and parallel enriched LREE and depleted HREE. Eu negative anomalies of Kwg are far more severe than those of Keg, which suggest that plagioclase fractionation in Kwg was much stronger than that of Keg. In the magnetic susceptibility vs. petrochemical and modal parameters, they all belong to magnetite-series and I-types, and can be classified as weakly-moderately ferromagnetic rocks. And the above relations could suggest that their susceptibility values are more mainly depended on ferromagnetic opaques than ferromagnetic and paramagnetic assemblages (Bt ＋ Ch ＋ Ser ＋ Op).

• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.245-252
• /
• 2008

The growth characteristics and the Germanium (Ge) uptake of rice plant (Hopyungbyeo) in soil with Ge were investigated under different soil textures to obtain the basic information for agricultural utilization of Ge. This study was carried out in the Wagner pot ($15,000^{-1}a$). Ge concentration in soils such as clay loam, silt loam, loam and sandy loam for rice plant cultivation was treated at $8mg\;kg^{-1}$. The growth status of rice plant was almost similar in all soil texture, and rice yield was higher in the order of silt loam > clay loam > loam > sandy loam. In rice bran, the Ge uptakes in silt loam, clay loam, loam and sandy loam were 980, 868, 754 and $803{\mu}g\;pot^{-1}$, respectively. The Ge uptakes of brown rice and polish rice were greater in the order of silt loam > sandy loam > clay loam > loam. In silt loam, the Ge uptake rates in leaf, stem, root, rice bran and brown rice were 19.7, 2.3, 0.03, 3.1 and 0.44%, respectively. Therefore, under the given experimental condition the optimum soil texture for production of functional rice with Ge is a silt loam.

• Journal of the Korean earth science society
• /
• v.21 no.5
• /
• pp.553-562
• /
• 2000

Daejeonsa basalt in the Mt. Juwang area is composed of 12 lava flows alternate with 9 peperites, and each lava and peperite has variable thickness. Globular peperites yielded in Daejeonsa basalt are mixed basalt clasts with reddish shale. Based on field description, when lava flows over unconsolidated wet shale or injectes into unconsolidated wet shale, peperites were formed at the contacts between lava and shale. Daejeonsa basalt are massive lava flows with rare vesicules: some vesicules are found in upper part of a flow unit. The basalt has mainly pseudomorphs of olivine as phenocryst, and also plagioclase and clinopyroxene phenocrysts in rocks with higher Mg-number. Matrix is mainly subophitic texture, sometimes showing ophitic and intergranular textures due to different cooling rate. Clinopyroxene is augite(Wo$_{41.6}$En$_{45.1}$Fs$_{13.3}$), and plagioclase is mostly labradorite(An$_{55.0}{\sim}_{67.7}$), but some is andesine(An$_{44.3}$) and bytownite(An$_{74.5}$). Oxide minerals are composed of titanomagnetite and ilmenite.

• Economic and Environmental Geology
• /
• v.28 no.3
• /
• pp.199-211
• /
• 1995

The deep sea camera system could render it possible to obtain the detailed information of the nodule distribution, but difficult to estimate nodule abundance quantitatively. In order to estimate nodule abundance quantitatively from deep seabed photographs, the nodule abundance equation was derived from the box core data obtained in KODOS area(long.: $154^{\circ}{\sim}151^{\circ}W$, lat.: $9^{\circ}{\sim}12^{\circ}N$) during two survey cruises carried out in 1989 and 1990. The regression equation derived by considering extent of burial of nodule to Handa's equation compensates for the abundance error attributable to partial burial of some nodules by sediments. An average long axis and average extent of burial of nodules in photographed area are determined according to the surface textures of nodules, and nodule coverage is calculated by the image analysis method. Average nodule abundance estimated from seabed photographs by using the equation is approximately 92% of the actual average abundance in KODOS area. The measured sampling points by box core or free fall grab are in general very sparse and hence nodule abundance distribution should be interpolated and extrapolated from measured data to uncharacterized areas. The another goal of this study is to depict continuous distribution of nodule abundance in KODOS area by using PC-version of geostatistical model in which several stages are systematically proceeded. Geostatistics was used to analyse spatial structure and distribution of regionalized variable(nodule abundance) within sets of real data. In order to investigate the spatial structure of nodule abundance in KODOS area, experimental variograms were calculated and fitted to a spherical models in isotropy and anisotropy, respectively. The spherical structure models were used to map out distribution of the nodule abundance for isotropic and anisotropic models by using the kriging method. The result from anisotropic model is much more reliable than one of isotropic model. Distribution map of nodule abundance produced by PC-version of geostatistical model indicates that approximately 40% of KODOS area is considered to be promising area(nodule abundance > $5kg/m^2$) for mining in case of anisotropy.

• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.197-212
• /
• 2020

This study was carried out material characteristics and firing conditions for some potteries in early and middle Neolithic period at the Munamri sites, where the first farmland remails were found in Korea. It is divided into six kinds of surface patterns for potteries such as the raised, bamboo tube and red painted (patternless) from the early Neolithic period (BC 4000 to 6000), and the patterns of horizontal herringbone, short slanted lined or lattice and incised thick line in the middle Neolithic period (BC 3000 to 4000), respectively. Based on the color measures, redness and yellowness of potteries were relatively high as condition of oxidation firings, were also observed black cores on the cross section of potteries. The firing temperature is divided into two groups having under 800℃ and 800to 900℃, the difference in patterns of the potteries are not confirmed. As a microtextures, the bamboo tube pattern potteries show the sericitization biotite, the quartz have developed a suture line textures, and altered alkali feldspars are occurred. X-ray diffraction analysis shows that the main minerals contained in potteries are chlorite and amphibole besides quartz, alkali feldspar and biotite. Considering the geology around the Munamri area is the biotite amphibole granite and soil layers within 10km radius are used as the raw materials for the potteries. The raw materials are presumed that the sources from the metamorphic rocks along the water systems through the mountains around the sites on the basis of well developed suture line textured quartz in potteries. Results on normalized geochemical compositions, the potteries by surface patterns are very similar to sources, and it is judged that was made by using the surrounding soils despite the long time difference from the early to middle in the Neolithic period.

• Journal of Environmental Impact Assessment
• /
• v.25 no.6
• /
• pp.369-383
• /
• 2016

A distributed watershed model CAMEL(Chemicals, Agricultural Management and Erosion Losses) was applied to a part of grazing grassland and vegetation buffer strip(VBS) located in Daegwanryeong, Korea. A set of scenario analyses was carried out for grassland and VBS with various combinations of VBS widths, soil textures and ground surface slopes. The simulation results indicate that annual direct runoff decreases with wider VBS and the removal efficiency of pollutants generally decrease with steeper slopes. The removal efficiency of sediment is not significantly different with VBS widths. For gentle and medium slopes($10^{\circ}$, $20^{\circ}$), the removal efficiency of TOC and TN is not significantly different with VBS widths. As for a steep slope($30^{\circ}$), however, the removal efficiency of TOC and TN increases with narrower VBS. The removal efficiency of TP is generally high except for medium and steep slope of sandy loam where the removal efficiency of TP increases with wider VBS. This result of TP is contrary to the results of TOC and TN due to the adsorption characteristics of phosphorus associated with fine sediment particles. It is expected that CAMEL can be used for evaluating the effectiveness of VBS to reduce non-point source pollution discharges.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.3
• /
• pp.141-147
• /
• 2018

In a time when product development cycles are getting shorter and shorter, many companies are making efforts to develop products with high reliability in a short period of time, accelerated life test is widely used as a method to quickly evaluate reliability. Accelerated life test reduces the test life or the life of the product from the observed data by shortening the lifetime of the product or abruptly lowering the performance under the worse condition than the actual condition in order to shorten the test cost or the test time. In this paper, BL3640A-06P+RB35, DC12V model, which is used in the support device of an automatic rotation type digital signage, which display various information such as textures and images on a display screen in a public place or a commercial space, BLDC motors were subjected to a constant stress test and at the rotational speed of 1rpm, $180^{\circ}$ rotation and reverse rotation under actual use conditions, the stress was imposed on the rotating speed of 2rpm and the weight of the actual installed product from 22.2kgf to 10kgf were installed. The lifetime of the actual use environment condition is 23,545 hours and the rotation speed is accelerated. The life time of the acceleration condition with the additional weight is 1,380 hours. The acceleration factor is calculated as 17.06, the one year guarantee test day is 235 days to 14 days, of the period from 470 days to 28 days, and the third year from 704 days to 42 days. The test date of the BLDC motor was tested on the shortened test date, and the rotational speed and the current value were measured. It is found that there is no defect even if it operates as the test date corresponding to the specified one year warranty period and the 3 year accelerated life test which is experimented. Using the statistical technique of the regression analysis the expected time for the motor to defect to #4 samples was 20 years.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.202-209
• /
• 2015

This study compared and analyzed the measurements of pullout load according to the depth of reclamation in the foundation, compaction ratio of soil, spiral diameter, and soil textures in an experiment with a model and reached the following conclusions: The comparison results of extreme pullout load between farm and reclaimed soil show that farmland soil recorded a score that was 1.2~3 times higher than that of reclaimed soil. The investigator measured pullout load in farmland and reclaimed soil and observed a tendency of rising extreme pullout load according to the increasing depth of reclamation and compaction ratio with a similar load-displacement curve between the two types of soil. Extreme pullout load made a greater increase by the rising size of diameter than the increasing depth of reclamation, also making a considerably bigger increase according to the rising compaction ratio than the other conditions. Therefore, the spirals bar is expected to be available in soft soil foundation, as well as farmland as increasing buried deep of foundations, compaction rate, diameter of the spiral, ect.