• Textile Coloration and Finishing
• /
• v.25 no.2
• /
• pp.134-139
• /
• 2013

A tenter is very important to dry and heat-set fabrics in textile dyeing and finishing industry. However, the tenter machine typically utilizes more than 80% of all the power in dyeing system, and yet is one of the primary machine which affects quality of fabrics. Therefore, performance optimization of the tenter machine is required to reduce energy consumption and enhance quality of fabrics. To optimize the tenter machine, it is important to maintain the uniform flow rate, which can be obtained by optimizing a nozzle geometry. In this study, emboss hole angle was investigated as main parameter in flow rate uniformity and heat flux efficiency. The analysis results were compared with those acquired from bench-scale dryer test in the laboratory. The tenter machine performance simulated by Computational Fluid Dynamics(CFD) was optimized by controlling emboss hole angle.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.3 s.27
• /
• pp.337-354
• /
• 1989

In order to evaluate the noisy environment and hearing loss of workers served in noisy working environment, the author investigated 212 manufacturing industries located in Ulsan Industrial District that could be observed for 3 successive years from 1986 to 1988. The obtained results were as follows: 1. There was increased tendency in the number of workers served in noisy working environment and that of examined of hearing loss for three years. 2. In the noise level of working environment, the number of industries less than 89dB(A) was increased every year, while more than 90dB(A) was in decreasing tendency. 3. Mean hearing loss by frequency was the most prominent in 4,000Hz, the level of hearing loss was in increasing tendency yearly, and that of left eat was higher than right ear in almost all type of industry. 4. In 1986, the level of hearing loss by type of industry was highest in manufacture of electric and electronic, and followed by paper and plywood, and metal products in right ear: that was in the order of manufacture of electric and electronic, metal products and textile products in left ear. In 1987, that was in the order of manufacture of metal products, machinery and others in right ear, and metal products, machinery and food stuff in left ear in 1988, manufacture of others, food stuff and machinery in both ear. 5. In hearing loss by service duration, right ear of 5-9 years group was higher than that of less than 5 years in 1987, whereas in 1988, the longer in service duration, the higher in the level of hearing loss in both ear. 6. In 1986, 1987 and 1988, the prevalence rate of noise-induced hearing loss were showed increasing tendency as 0.4% ,0.8% and 1.5% , respectively, and manufacture of textile products was highest(1.0%) in 1986, machinery(1.2%) in 1987 and others(2.8%) in 1988. 7. The proportion of grade E in early loss index were 76.1% (1986), 78.2% (1987) and 80.5% (1988) in left ear, 75.9% (1986), 76.4% (1987) and 75.9% (1988) in right ear.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.343-344
• /
• 2007

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.89-92
• /
• 2007

See Full Text

• Journal of the KSME
• /
• v.35 no.1
• /
• pp.4-25
• /
• 1995

섬유산업은 우리나라에서는 최초로 성숙단계에 돌입한 선발산업으로서 이제는 독자기술체제를 구축하여야 할 위치에 처해 있다. 따라서 이러한 목적을 달성하기 위해서는 고급기술인력의 양 성을 담당하는 대학에서 섬유공학 및 섬유기계에 관한 교육의 내실화 내지 강화를 시급히 모색 해야 할 시점에 처해 있다고 생각된다.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.25-32
• /
• 2019

The influence of the contact amount of carbon dioxide per unit mass of dyestuff(${\alpha}$) on dyeing uniformity in supercritical fluid dyeing is analyzed in this study. The experiments using a 5L class Pilot Scale dyeing machine is carried out for this study purpose. For a fixed temperature and pressure, the amount of sample and the dyeing leveling time were considered as process variables. The results show that the increase in the amount of the sample causes a higher color difference than the reference sample, and it also increases the amount of residual dye. On the other hand, the color difference tended to decrease with the increase in dyeing time. Based on these results, the correlation between ${\alpha}$ value and dyeing uniformity in supercritical fluid dyeing is obtained.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.160-168
• /
• 2018

Among the components of rotary hooks, a core component of an embroidery sewing system, a study was conducted to apply metal injection molding to the manufacture of a hook body and a housing that was very difficult to mechanical working. The correlation of feedstock, a mixture of binder and SCM 415 metal powder, and properties of the pressure-volume-temperature interrelationship, viscosity, specific heat, and thermal conductivity were measured. Injection molds for the hook body and the housing were developed through injection molding analysis using these properties and conducted injection tests. Optimal injection gate position and number, injection pressure, and injection time were obtained through a comparison of analysis results with the experiment results.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.59-66
• /
• 2009

The seven kinds of polyester fabrics having different fabric characteristics were investigated in terms of their dyeing levelness under various liquor ratios. The levelness was evaluated statistically from color strength obtained at different sections of each piece of dyed fabrics. The color strength data were analyzed using a exponential decay function of 3 parameters, $y=y_0+ae^{-bx}$. The b value of the function was used as a index of sensitiveness of dependence on liquor ratio of levelness. The index, b value, showed a linear proportional relationship to thickness of fabrics. Average unlevelness of dyeings exhibited a inverse proportional relationship to both weight and thickness of fabrics.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.4
• /
• pp.73-79
• /
• 2021

The objective of this study is to prevent or decrease condensation on the surface of aluminum butterfly valves used in high humidity air conditions. We proposed a new valve with an anti-condensation device, a heat resistance medium, instead of a conventional valve. We, then, compared the surface temperature distribution between the proposed and conventional valves using experimental and analytical methods. The size of the evaluated valve is 100A and fluid conditions are 35℃/RH 75% in the air outside the valve and 5℃ in the cooling water inside the valve. The experimental results show that the surface temperature of the proposed valve is 23~42% higher than that of a conventional valve, thereby exhibiting an anti-condensation effect. As a result, we observed the complete prevention of condensation on a gear box mounted to the proposed valve, showing surface temperature distribution above the dew point temperature of air. The analytical results are in agreement with the trends in experimental results.

• International Commerce and Information Review
• /
• v.9 no.2
• /
• pp.161-182
• /
• 2007

The objective of this paper is to examine the competitiveness of Korean export firms in EU market. In this study, market share index, RCA index, trade specialization index, and market competitiveness index were used as an analytical tool. On the market share index, Korea had a large market share in the SITC section 7(machinery and transport equipment) market in EU. On the RCA index, Korea appeared to have high export competitiveness in the electrical machinery, apparatus and appliances, n.e.s.(not elsewhere specified[stated]), and electrical parts thereof (77), travel goods, handbags and similar containers(83), textile yarn, fabrics, made-up articles, n.e.s., and related products(65), and iron and steel(67) division. On the trade specialization index, however, Korea appeared to tend to decline generally. On the market competitiveness index, Korea appeared to have competitive advantage in the iron and steel(67), machinery specialized for particular industries(72), office machines and automatic data-processing machines(75), electrical machinery, apparatus and appliances, n.e.s., and electrical parts thereof(77), road vehicles(78), and other transport equipment(79) division; but in 29 divisions, the index indicates that Korean firms' competitiveness was low. Finally, the authors discuss the implications of these findings and offer directions for future study.