• IE interfaces
• /
• v.19 no.4
• /
• pp.281-290
• /
• 2006

The main objective of this study is to analyze the structure of efficiency of R&D input variables and the attributes of patent information as output of R&D activities in the major manufacturing industries (electric & electronics, machinery, chemical, textile) from the mid-1970s to the late-1990s by the development of "mapping technique". To attain this objective we first have examined the attribute of time-lag which depends on the absolute, and the cumulative values between input and output. And on the basis of this result, we have made an analysis on the impact to extract the main variables affecting patent by industries. Moreover, according to time trend of the impact variables, we have analyzed the structure of R&D efficiency, and of technological progress which will be changed with time by patent information. It has been aimed at constructing technological progress patterns in the Korea industry.

• Journal of Technology Innovation
• /
• v.2 no.1
• /
• pp.219-241
• /
• 1994

This paper presents the results of an empirical study on the relationship between the type of new product idea sources and the rate of success of new product development and commercialization in Korean industries. The sample was taken from various Korean industries including telecommunication, electronics, chemical, machinery, textile, etc. and composed of 45 failure and 73 success cases. The findings are not much different from those of previous studies done in the developed countries, but show some typical characteristics of new product development activities and the idea sources, information acquisition methods, type of information , incentives for idea generation, etc. of the firms in developing country like Korea. Especially the survival rate curve and the accumulative investment curve from the idea generation to commercialization phase show a little different behavior from the previous study, which also reflect the manpower, duration of each phase of the new product development process in the Korean firms.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.12
• /
• pp.1379-1387
• /
• 2011

A PID-feedforward controller and Robust Internal-loop Compensator (RIC) based on reinforcement learning using random variable sequences are provided to auto-tune parameters for each controller in the high-precision position control of PMLSM (Permanent Magnet Linear Synchronous Motor). Experiments prove the well-tuned controller could be reduced up to one-fifth level of tracking errors before learning by reinforcement learning. The RIC compared to the PID-feedforward controller showed approximately twice the performance in reducing tracking error and disturbance rejection.

• Textile Coloration and Finishing
• /
• v.12 no.6
• /
• pp.337-343
• /
• 2000

In this study, the five harness satins are weaved in rapier loom and air-jet loom each using the pure wool Nm 2/72, also the physical characteristics of fabrics that are produced in these weaving machinery in same condition are measured by using the KES-FB system. The results of analysis and comparison on each fabric are presented by classifying items, that is to say, the tensile, bending properties. The results we as follows ; The extensibility of grey fabric woven by rapier in the weft direction is larger than that by air-jet loom. The variation of bending property of grey fabric woven by rapier in the weft direction is more irregular than that by air-jet loom. However, these properties are similar both rapier and air jet fabrics.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.11a
• /
• pp.171-174
• /
• 2006

기존에 사용되고 있는 노이즈 제거 필터인 평균값 필터, 중간값 필터 등의 필터를 이용하여 노이즈 포함 영상을 복원할 경우, 몽롱화 현상이 발생하게 되며 이러한 몽롱화 현상은 마스크의 크기가 달라짐에 따라서 심해지는 경향을 보인다. 본 논문은 노이즈가 포함된 입력 영상의 픽셀 주변 환경에 기반하여 점증적으로 노이즈를 제거하여 입력영상을 변환 시켜, 몽롱화의 현상을 줄이고, 정보의 추출이 용이하도록 영상을 복원하는 점증적 노이즈 제거 필터를 제안한다. 또한 노이즈에 의해서 훼손된 입력 영상의 복원을 통하여 제안된 노이즈 제거 필터의 효용성을 보인다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.11a
• /
• pp.33-38
• /
• 2006

인공지능 분야에서는 합의된 개념을 정의하고, 개념과 개념사이의 관계를 표현하여 인간과 시스템이 지식을 공유하는 것으로 온톨로지를 정의하고 있다. 현재까지 영상이해를 위해 온톨로지를 설계하고 이용하는 연구가 진행되어 왔다. 그러나 기존의 영상이해에 관한 연구는 개념적인 연구에 그칠 뿐 구체적인 방법을 제시하지는 못하고 있다. 본 논문에서는 온톨로지로 표현한 지식에 근거하여 영상의 처리, 분석 해석 과정을 통해 영상을 이해하는 영상이해 시스템의 프레임워크를 제안한다. 영상이해 과정은 i)특정 부야의 지식을 온톨로지로 표현하고, ii)영상 처리 및 분석 과정을 통해 영상을 구성하는 객체들의 속성을 추출하며, iii)온톨로지 추론을 통해 객체의 속성으로부터 객체를 정의하여 영상을 해석한다. 그리고 제안한 프로세스에 기반 하여 영상이해 시스템을 구축하고 특정 분야에서의 실험을 통하여 제안된 시스템의 효용성을 확인한다.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.33-38
• /
• 2022

This study investigates the outlet temperature of coolant heater based on heat and flow volume conditions. Through computer simulation, the coolant temperature at the outlet was analyzed to investigate the heat and flow volume conditions of the coolant heater, and the optimal conditions were derived. Results show that heat and flow volume conditions, it was confirmed that heat condition is 0.424 W/mm³, and flow volume condition is 500 l/h, demonstrates optimal conditions. The results of this study can be utilized to efficiently control the coolant temperature through various heat and flow volume conditions.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.111-118
• /
• 2022

The vehicle industry requires superior technology that can increase the efficiency of the battery of an electric vehicle. A coolant heater that can optimize the temperature of the battery is one of the most effective techniques for cold environments. However, the vibrations generated by this device can cause major complications, such as leakage and system errors. Therefore, the vibrations of the device must be suppressed to improve the stability. In this study, the fastening conditions of a coolant heater were analyzed using a computer simulation to investigate the natural frequencies and mode shapes which reflect the primary reasons for the largest vibrations under the given operating conditions. The results showed that six-bolted joints could considerably improve the stability of the fastening device

• Composites Research
• /
• v.29 no.2
• /
• pp.73-78
• /
• 2016

In this paper, The concept of a wheel with carbon fiber composite is to replace the conventional material used for a wheel hub, such as plastic, with a disk-type hub made of carbon fabric and epoxy resin. The impact load from the ground under real conditions was considered; a low-velocity impact test was conducted to evaluate the impact performance of the carbon wheel and compare it with that of a conventional plastic wheel. This study applied a 70 J impact load as a test condition. The impact energy was controlled in the test by adjustment of height and weight of impactor. The use of a carbon disk wheel hub was confirmed to reduce weight and generate an excellent repulsive force at low energy under conditions similar to real driving conditions. The results showed that the maximum load increased proportionally depending on the impact load, but the growth of the maximum load was reduced at a 20 J impact load and tended to decrease at a 45 J impact load. The carbon wheel showed excellent properties ; the level of rebounding was 35.3% and 19.1% of the total impact energy at impact loads of 5 J and 10 J, respectively. On the other hand, the carbon disk wheel rebounded less than 5% of the total energy due to crack generation of the thin carbon hub for impact loads of more than 20 J.

• Textile Coloration and Finishing
• /
• v.32 no.2
• /
• pp.111-120
• /
• 2020

In this study, lignin/chlorinated poly(vinyl chloride)(CPVC) blended fibers have been produced for the development of low-cost carbon fiber. Carbon fiber manufacturing was accomplished through stabilization and carbonization process. The lignin/CPVC blended fibers were prepared by wet spinning method. Dimethylacetamid e(DMAc) and cychlohexanone in a ratio of 5:1(wt%) was employed as co-solvent. The ratio of lignin/CPVC was prepared at 0/10, 1/9, 2/8, 3/7, 4/6, and 5/5(wt%). The spinning solution was extruded at a rate of 0.1 to 0.4ml/min according to the blending ratio. The speed of the rollers was the same for all ratios(draw ratio=1). Analysis of fiber cross-section by scanning eletron microscopy(SEM) showed that as the lignin ratio increased in the same coagulation bath and distilled water, the pore size of the spinning fiber decreased. Therefore, the highest tensile strength of the blending fibers was 6.3±1.2MPa at the 5/5 ratio. The carbon fiber also showed the best tensile strength of 120.78±2.43MPa at 5/5 ratio.