• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.377-385
• /
• 2002

Ultrasonic tests employing non-ionizing radiation are preferred in nondestructive examinations since they are safe and simple in use. The same principles of the techniques have been taken as valuable tools in medical area for the diagnoses of diseases, in other words, defects of the human body. The paper overviews the principles of the medical diagnosis based on nondestructive ultrasonic tests, and then evaluates experimentally the clinical potential of C scan images not popular in medicine, for detecting the micro fractures of the cortical bone. In the experiment the micro bone fractures were created on the femurs of porks by loading three point bending forces (2-4kN) with the speed of 1 mm/min. As the extent of the fracture was altered, not only X ray images but also ultrasonic C scan images using a focused ultrasonic probe resonated at 25 MHz were obtained. The results showed that ultrasonic C scan images were capable of detecting the micro bone fractures which were not possible to identify by conventional X ray images.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.2
• /
• pp.148-156
• /
• 2007

The fiber dispersion in fiber-reinferced cementitious composites is a crucial factor with respect to achieving desired mechanical performance. However, evaluation of the fiber dispersion in the composite PVA-ECC (polyvinyl alcohol-engineered cementitious composite) is extremely challenging because of the low contrast of PVA fibers with the cement-based matrix. In the present work, a new evaluation method is developed and demonstrated. Using a fluorescence technique on the PVA-ECC, PVA fibers are observed as green dots in the cross-section of the composite. After capturing the fluorescence image with a charged couple device (CCD) camera through a microscope, the fiber dispersion is evaluated using an image processing technique and statistical tools. In this image processing technique, the fibers are more accurately detected by employing an enhanced algorithm developed based on a discriminant method and watershed segmentation. The influence of fiber orientation on the fiber dispersion evaluation was also investigated via shape analyses of fiber images.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.5
• /
• pp.393-397
• /
• 2007

Eddy current standard including an artificial slot for the calibration of absolute type surface probe was fabricated. Developed eddy current standard has the electric conductivity and dimensions, and contains artificial slot as established in ASTM E 1629. The width and depth of artificial slot are 0.1 mm and 0.5 mm respectively. This slot was only possible to measure the depth on the two side edges, and impossible for the middle part with general measurement tools. The ultrasonic test method was applied for measuring depth of the middle part of the artificial slot in the standard. Using this method the dimension could be measured successfully with uncertainty about $15\;{\mu}m$. Calibration of eddy current standard for the absolute probe can be performed by this technique.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.2
• /
• pp.86-99
• /
• 2007

Packet filtering is to filter out potentially malicious network packets. In order to test a packet filtering function we should verify whether security policies are performed correctly as intended. However there are few existing tools to test the function. Besides, they need user participation when generating test cases or deciding test results. Many security administrators have a burden to test systematically new security policies when they establish new policies or modify the existing ones. To mitigate the burdens we suggest a new test method with minimal user articipation. Our tool automates generation steps of the test cases and the test oracles, respectively. By using the test oracles generated automatically, deciding test results is possible without user intervention. Our method realizes an automatic testing in three phases; test preparation phase, test execution, and test evaluation. As a result it may enhance confidence of test activities more highly. This paper describes the design and implementation of our test method and tool.

• International Journal of Knowledge Content Development & Technology
• /
• v.4 no.2
• /
• pp.49-65
• /
• 2014

This paper investigates how strategy formulation and implementation processes used by the University of Cape Coast (UCC) in building its digital collections compare with the Andrew's strategic formulation and implementation theoretical framework. Theory-testing case study methodology was used. The data collection instruments were the key informant interview technique and document reviews. During the formulation phase, two aspects (resources and aspirations of senior management) were emergent. During the implementation phase, five aspects (achieving results, processes and behaviour, standards, motivation, personal) were emergent. All other elements of building the UCC digital collections were planned during both the formulation and implementation phases. Although the emphasis on students and learning is laudable and apt, there seems to be lack of focus on research support beyond digital collection building, despite the fact that research excellence is one of the UCC's key priorities. Opportunities exist for improving feedback mechanisms between the users, digital library staff and the university management; and inclusion of social media tools in the digital library project. Since only the experience of a single institution of higher learning is considered, it cannot be definitively stated that strategy formulation and implementation will be similar in every institutional context. However, the results provide a basis for academic digital libraries to draw lessons from this case. In African public universities, there is little earlier research on strategy formulation and implementation in digital library management. Strategy formulation and implementation is a critical issue for higher education academic libraries especially in developing countries like Ghana, due to limited financial resources and the rapid change in the information environment during the last several decades.

• Journal of Korean Academy of Nursing
• /
• v.13 no.2
• /
• pp.1-21
• /
• 1983

The purposes of this study were to(a) develop theoretical modifications of the extended gate control theory of pain using Fishbein's model and（b) test the efficacy of these modifications. Attitude, social subjective norm, personal subjective norm, habit and state anxiety were operationalized to represent internal stimuli for the cognitive-evaluative and motivational-affective dimensions of the theory. Pain expression was operationalized as sensory and affective responses to pain, and pain endurance. Sixty-two female nurses from 20 to 50 years of age participated. A semantic differential scale measured attitude and motivations to comply; a Likerty-type scale measured personal and social norms and habit. Spielberger's STAI measured state anxiety, Pain was produced using a modified submaximum effort tourniquet technique. Pair expression was measured using ratio scales of sensory intensity and unpleasantness developed by Gracely and his associates. Pain endurance was measured by subtracting time of pain threshold from pain tolerance. The first hypothesis examining whether pain endurance would be more significantly related to the affective response than to the sensory response was net rejected. Four remaining hypotheses, testing the ability of the five variables to predict the sensory and affective responses were not rejected. However, the habit of pain expression and the attitude toward pain expression contributed to the prediction of both sensory and affective responses to pain. The interaction between the cognitive-evaluative and the sensory-discriminative dimensions and the interaction between the cognitive-evaluative and motivational-affective dimensions were partially supported by the data from these two variables. The interaction between the motivational-affective and the sensory-discriminative dimensions was also supported by the relationship of sensory to affective responses. The variables which did not significantly predict pain expression appeared to have potential for prediction. Revision and testing of the tools for better reliability, validity, and clinical usuability are needed. The study contributed to theory building. The identification of variables which pre-dict pain behavior must occur before effective nursing interventions can be developed.

• Journal of Genetic Medicine
• /
• v.5 no.2
• /
• pp.89-93
• /
• 2008

"Personalized medicine," the goal of which is to provide better clinical care by applying patient's own genomic information to their health care is a global challenge for the $21^{st}$ century "genomic era." This is especially true in Korea, where provisions for clinical genetic services are inadequate for the existing demand, let alone future demands. Genomics-based knowledge and tools make it possible to approach each patient as a unique biological individual, which has led to a paradigm-shift in medical practice, giving it more of a predictive focus as compared with current treatment oriented approach. With recent advancements in genomics, many genetic tests, such as susceptibility genetic tests, have been developed for both rare single gene diseases and more common multifactorial diseases. Indeed, genetic tests for presymtomatic individuals and genetic tests for drug response have become widely available, and personalized medicine will face the challenge of assisting patients who use such tests to make appropriate and wise use of genetic risk assessment. A major challenge of genomic medicine lies in understanding and communicating disease risk in order to facilitate and support patients and their families in making informed decisions. Establishment of a health care system with provisions for genetic counseling as an integral part of health care service, in addition to genomic literacy of health care providers, is vital to meet this growing challenge. Realization of the promise of personalized medicine in the era of genomics for improvement of health care is dependent on further development of next generation sequencing technology and affordable sequencing test costs. Also necessary will be policy development concerning the ethical, legal and social issues of genomic medicine and an educated and ready medical community with clinical practice guidelines for genetic counseling and genetic testing.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.4
• /
• pp.248-261
• /
• 1997

Ultrasonic pattern recognition is the most effective approach to the problem of discriminating types of flaws in weldments based on ultrasonic flaw signals. In spite of significant progress in the research on this methodology, it has not been widely used in many practical ultrasonic inspections of weldments in industry. Hence, for the convenient application of this approach in many practical situations, we develop an intelligent ultrasonic signature classification software which can discriminate types of flaws in weldments based on their ultrasonic signals using various tools in artificial intelligence such as neural networks. This software shows the excellent performance in an experimental problem where flaws in weldments are classified into two categories of cracks and non-cracks. This performance demonstrates the high possibility of this software as a practical tool for ultrasonic flaw classification in weldments.

• The Plant Pathology Journal
• /
• v.23 no.4
• /
• pp.260-265
• /
• 2007

Testing a large number of samples from field monitoring and routine indexing is cumbersome and the available virus detection tools were labor intensive and expensive. To circumvent these problems we established tissue blot immunoassay (TBIA) method an alternative detection tool to detect Barley mild mosaic virus (BaMMV) and Barley yellow mosaic virus (BaYMV) infection in the field and greenhouse inoculated plants for monitoring and routine indexing applications, respectively. Initially, leaf and stem were tested to determine suitable plant tissue for direct blotting on nitrocellulose membrane. The dilutions of antibodies were optimized for more efficient and economical purposes. Results showed that stem tissue was more suitable for direct blotting for it had no background that interferes in the reaction. Therefore, this technique was referred as direct stem blot immunoassay or DSBIA, in this study. Re-used diluted (1:1000) antiserum and conjugate up to 3 times with the addition of half strength amount of concentrated antibodies was more effective in detecting the virus. The virus blotted on the nitrocellulose membrane from stem tissues kept at room temperature for 3 days were still detectable. The efficiency of DSBIA and RT-PCR in detecting BaMMV and BaYMV were relatively comparable. Results further proved that DSBIA is a rapid, reliable and economical detection method suitable for monitoring BaMMV and BaYMV infection in the field and practical method in indexing large scale of barley materials for virus resistance screening.

• Journal of KIISE:Software and Applications
• /
• v.32 no.8
• /
• pp.704-716
• /
• 2005

Assembling new software systems from Prepared components is an attractive alternative to traditional software development method to reduce development cost and schedule dramatically. However, if separately developed components are tested, integrated and verified with unreasonable effort and high cost, it would not be an effective way to software development. Components are not distributed in the shape of white-box source code so that should be hard to validate and test in new application environment. For solving this problem, built-in tester components are suggested to check the contract-compliance of their server components. If components have various and complex function, built-in tester should be heavy and unflexible to test in composition of components. This paper suggests enhancing automated wrapper technique which substitutes with built-in tester components and shows the usability of the wrapper by design and implementation. Component testing in this way reduces the cost and effort associated with preparation of component testing and makes the various test experiments in components assembly.