• Economic and Environmental Geology
• /
• v.49 no.4
• /
• pp.281-290
• /
• 2016

Coastal areas, used as human utilization areas like leisure space, medical care, ports and power plants, etc., are regions that are continuously changing and interconnected with oceans and land. Regular monitoring of coastal changes is essential at key locations with such volatility. But the survey method of terrestial LiDAR(Light Detection and Ranging) system has much time consuming and many restrictions. For effective monitoring coastal changes, KIOST(Korea Institute of Ocean Science & Technology) has constructed a shipborne mobile LiDAR system. The shipborne mobile LiDAR system, installed in a research vessel, comprised a land based LiDAR(RIEGL LMS-420i), an IMU(MAGUS Inertial+), a RTKGNSS(LEICA GS15 GS25), and a fixed platform. The shipborne mobile LiDAR system is much more effective than a land based LiDAR system in the measuring of fore shore areas without shadow zone. Because the vessel with the shipborne mobile LiDAR system is continuously moved along the shoreline, it is possible to efficiently survey a large area in a relatively short time. We conducted test measurements in the Anmok-Songjung beach around the Gangneung port. Effective monitoring of the changes using the constructed shipborne mobile LiDAR system for seriously eroded coastal areas will be able to contribute to coastal erosion management and response.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.146-152
• /
• 2005

The activated carbon was produced from Sancheong bamboo by carbon dioxide gas activation methods. The carbonization of raw material was conducted at $900^{\circ}C$, and $CO_2$ activation reactions were conducted under various conditions: activation temperatures of $750-900^{\circ}C$, flow rates of carbon dioxide $5-30cm^3/g-char{\cdot}min$, and activation time of 2-5 h. The yield, adsorption capacity of iodine and methylene blue, specific surface area and pore size distribution of the prepared activated carbons were measured. The adsorption capacity of iodine (680.8-1450.1 mg/g) and methylene blue (23.5-220 mg/g) increased with increasing activation temperature and activation time. The adsorption capacity of iodine and methylene blue increased with the $CO_2$ gas quantity in the range of $5-18.9cm^3/g-char{\cdot}min$. But those decreased over those range due to the pore shrinkage. The specific volume of the mesopore and macropore of bamboo activated carbon were $0.65-0.91cm^3/g$. Because of this large specific volume, it can be used to the biological activated carbon process. Bamboo activated carbon phisically adsorbed the $CO_2$ of maximum 106 mg/g-A.C in the condition of 90% $CO_2$ and adsorption temperature of $20^{\circ}C$. The $CO_2$ adsorption ability of bamboo activated carbon was not changed in the 5 cyclic test of desorption and adsorption.

• Child Health Nursing Research
• /
• v.7 no.1
• /
• pp.118-140
• /
• 2001

The purpose of this study was to measure the effect of safety education program in preschool children for accident prevention and improve their health through more systematic method. Data were collected from 584 preschoolers(247 preschooler are assigned to experimental group and 337 preschoolers are assinged to control group) from 4 to 6 years old using APP paper test which consists of questions and drawings. To experimental group, safety education were done 4 times within the time of 30 minutes per 1 time using education books, drawings, OHP. The findings of this study are as follows: 1. There were significant difference in movement(χ²=18.732, p=.0000), behavioral character(χ²=27.785, p=.000), synthetic judgement(χ²=12.02, p=0.002). So, safety education program have effect on preschooler. 2. In the accident proneness on preschooler between experimental group and control group according to general characteristics, it proved significant difference in the case of accident prevention education were done, reasoning power(χ²=10.48, p=.005), movement speed(χ²=7.341, p=.025) and behavioral character(χ²=18.86, p=.000), in the case of housing pattern is private house(individual house, yard?), reasoning power(χ²=6.683, p=.035), movement speed(χ²=12.76, p= .002) and behavioral character(χ²=12.24, p=.002), in the case of housing pattern is mixed-type, movement speed(χ²=6.935, p= .031) and behavioral character(χ²=10.816, p=.004), in the case of housing pattern is over six stories, movement speed(χ²=7.543, p=.023), in the case of subjects' age is 4 years old, movement speed(χ²=16.5, p= .000) and behavioral character(χ²=12.18, p=.002), in the case of subjects' age is 5 years old, movement speed(χ²=7.519, p= .023), watchfulness(χ²=6.372, p=.041), behavioral character(χ²=14.74, p=0.001) and synthetic judgement(χ²=14.5, p=.001), in the case of subjects' sex is male, life safety(χ²=6.406, p=.041), movement speed(χ²=22.86, p= .000), behavioral character(χ²=13.72, p= .001) and synthetic judgement(χ²=13.82, p=.001), in the case of subjects' sex is female, reasoning power(χ²=12.57, p=.002) and behavioral character(χ²=13.16, p= .001), in the case of childrens have past accidental experience, traffic safety(χ²= 6.683, p=.035), in the case of childrens have no past accidental experience, reasoning power(χ²=8.384, p=.015), movement speed(χ²=20.6, p=.000), behavioral character(χ²=25.1, p=.000) and synthetic judgement(χ² =10.79, p=.005), in the case of children's order is first, reasoning power(χ²=11.15, p=.004), movement speed(χ²=11.92, p= .003) and behavioral character(χ²=7.003, p=.030), in the case of children's order is second, movement speed(χ²=6.694, p= .035), behavioral character(χ²=26.9, p= .000) and synthetic judgement(χ²=14.3, p= .001), in the case of nuclear family, reasoning power(χ²=8.777, p=.012), movement speed(χ²=19.0, p=.000), behavioral character (χ²=26.4, p=0.000) and synthetic judgement (χ²=9.999, p=.007), in the case of mothers' school career is under high school graduate, life safety(χ²=8.023, p=.018), movement speed(χ²=10.99, p=.004) and behavioral character(χ²=6.777, p=.034), in the case of mothers' school career is beyond college graduate, reasoning power(χ²=6.717, p= .035), movement speed(χ²=8.963, p=.011), behavioral character(χ²=25.03, p=.000) and synthetic judgement(χ²=15.19, p=.001), in the case of mothers' age ranged 31-34, movement speed(χ²=12.29, p=.002) and behavioral character(χ²=14.17, p=.001), in the case of mothers' age ranged 35-39, movement speed(χ²=9.859, p=.007), behavioral character(χ²=9.095, p=.011) and synthetic judgement(χ²=7.810, p=.020), in the case of mothers' age is over 40, life safety(χ² =5.593, p=.025), in the case of mothers' job is full-time, traffic safety(χ²=6.032, p=.049) and reasoning power(χ²=8.502, p= .014), in the case of mothers' job is part- time., movement speed(χ²=10.99, p=.004) and behavioral character(χ²=7.895, p= .019), in the case of mothers have no job, movement speed(χ²=6.410, p=.041), movement stability(χ²=6.879, p=.032), behavioral character(χ²=27.72, p=.000) and synthetic judgement(χ²=18.11, p=.000). The difference of accident proneness between experimental group and control group according to general characterists, it also showed that there were significant difference in behavioral character compared to other area.. From this findings, we can guess that safety education program change and guide preschoolers' behavioral character to desirable direction.

• Journal of Korean Academy of Nursing
• /
• v.8 no.1
• /
• pp.152-162
• /
• 1978

The desire to maintain health is increasing, consequently the role of nursing which has as one chief aim the solving of man′s basic problems is more and more important. Today, in spite of a growing concern about the nursing activities which nurses provide for individual human having specific needs, clinically in fact, it is questionable that individual′s expectation of nursing activities agrees with nurse′s performance of nursing activities. In this study the importance and agreement of the importance of the nursing activities during the hospitalized puerperal period as viewed by women in the puerperal period and by nurses caring for them, were assessed. The present study was undertaken in an attempt to furnish the basic data for expediting the progress of research activities in this area and further to be helpful in planning maternity nursing practice. The study population defined and selected was nurses (13) caring for women in the puerperal period and doing duty on obstetric & gynecologic ward at Y. hospital, and the women in puerperal period (39) as sum of 3 women selected by each nurse during the period of May 13th-June 4th 1976. The study data was collected by the direct interview method based on the questionnaire which the investigator made out. The study result was analyzed by percentage, t - test. The findings can be summarized as follows: 1. General characteristics of nurses doing duty on puerperal ward: a. Nurses′average age was 24.8 years old. b. 84.6% had educational background of 4 years of college. c. 69.2% had a religion. d. 53.8% were married. e. 53.8% had clinical experience of 1 year -3 years. f, 61.5% did duty on puerperal ward during 1 year -3 years. g. 46.2% desired to do duty on obstetric ? gynecologic ward. 2. General characteristics of the women who were studied during their puerperal period: a. Women′s average age was 26.4 years old. b. 79.5% had educational background above high school. c. 56.4% had a religion. d. 84.6% had living standard above medium. e. 89.7% had no occupation. f, 53,8% had previous hospitalization experience. g. 56.4% had previous delivery experience. 3. Examining the importance of 39 nursing activities during puerperal period selected by investigator, studied group of women considered that the most important nursing activity was "Record precisely about condition, medical treatment and nursing activity results etc". Nurses considered that the most important nursing activity was "Notice whether having pain and care for that". Both groups considered that the least important nursing activity was "Talk with her about topics such as news, hobbies, other interests". 4. Examining the importance of nursing activities in 4 specific categories, studied group of women considered that the most important nursing activity in physical nursing category was "Be sure of safety measure to prevent accidents, injuries", and nurses considered that the most important nursing activity was "Make her sleep and rest sufficiently". Studied group of women considered that the most important nursing activity in psychological category was "Explain about medical treatment and nursing activity ahead of time so she knows what to expect" , and nurses considered that the most important nursing activity was "Explain about puerperal period so she understands". Studied group of women considered that the most important nursing activity in relation to medical care was "Record precisely about condition, medical treatment and nursing activity results etc.", and nurses considered that the most important nursing activity was "Observing, cleaning and protecting the perineum" Studied group of women considered that the most important nursing activity in nursing category in preparation for discharge was "Instruct about personnel hygiene during puerperal period", and nurses considered that the most important nursing activity was "Instruct self-care to protect the perineum". 5. The analysis of this study showed a significant amount of disagreement computed by subtracting the nurse′s score from the patient′s score. Studied group of women put greater importance on physical nursing category, psychological nursing category, nursing in relation to medical care, than the nurses. These results were statistically significant at 0.01 level.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.111-126
• /
• 1998

In this study, radiographic evaluation was made using panoramic radiography and cross-sectional tomography of SCANORA/sup (R)/ in male and female adults in their 20's on the relationship between the maxillary sinus floor and the apex of the maxillary molar, to test the accuracy and effectiveness of the cross-sectional tomography, and to use this information in the assessment of preop. and postop. root canal treatment, apical surgery, extraction and implantology. Forty-one adults with an average age of 24.4 years were studied using panoramic radiography and cross-sectional tomography. In panoramic view and cross-sectional view, the position of the apices of maxillary molars were classified as separated, contacted, or protruded type; the general shape of the maxillary sinus floor was evaluated horizontally and vertically from cross-sectional tomography. The accuracy of each radiography was tested using maxilla from 5 fresh cadavers from the Anatomy Lab at Yonsei University Dental College, and panoramic view and cross-sectional tomography were taken in the same condition as with the patients. The results were as follows: 1. Panoramic view and cross-sectional view were taken in the maxilla specimen, and the actual distance between the maxillary sinus floor and the tooth apices were measured in the specimen; the median values of the distance from the tooth apices to the maxillary sinus floor in the panoramic view, cross-sectional view and in the actual maxilla specimen were 2.83 mm, 4.51mm, and 4.l5mm, respectively. In the cross-sectional view, the measured distance was close to the actual distance but in the panoramic view, the measured distance was far from the actual distance. 2. When the results of the panoramic view and cross-sectional view were compared, 40.5％ of the results agreed with each other in the two radiographic methods and buccal roots of the 2nd molar were the closest to the maxillary sinus floor in the cross-sectional tomography. 3. In cross-sectional view, when the vertical relationship of the maxillary sinus floor and maxillary roots was assessed, in 1st molars, type II (the sinus floor that extends down to the buccolingual furcation area) was predominant, while in 2nd molars, type I (the sinus floor located above the level connecting the buccal and lingual apices) was predominant. In the horizontal relationship, in 1st molars, type II (the lowest floor of the maxillary sinus located in between the buccal and lingual roots) was predominant; in 2nd molars, type I (the lowest floor of the maxillary sinus located on the buccal side of the buccal roots) and type II appeared in similar frequency. In conclusion, the SCANORA/sup (R)/ cross-sectional tomography was more effective than the frequently used panoramic view, in that the relationship of the maxillary molars and maxillary sinus floor can be evaluated more accurately and the buccolingual cross-sectional view can also be observed. And maxillary sinus floor that was close to maxillary 2nd molar had tendency to be located on buccal side than that close to 1st molar. Therefore, cross-sectional tomography is an effective and accurate method to evaluate the position of the teeth in relation to the sinus floor preoperative and can be easily used to diagnose localized periapical lesions. Also, the image quality obtained was quite satisfactory.

• Clean Technology
• /
• v.18 no.4
• /
• pp.379-389
• /
• 2012

Environmental issues are being paid more attention due to income growth, urban overcrowding, and population growth in Korea. Among the various environmental problems, odor damage is the one of the serious factors. To take example for food waste combination treatment in Su-young wastewater treatment plant in Busan, many complaints occurred because this plant locate around residential areas. The purpose of this work is not only to analyze odorous elements and their contributions but also to evaluate odor quotient (OQ), sum of odor quotient (SOQ), and treatment efficiency of bio-filter. The results of dilution sensory test of complex odor, grinder, leachate, hopper indicated higher order complex odors happen in July and August. The main odorous elements consisted of hydrogen sulfide, ammonia, methly mercaptan and acetaldehyde, which were analyzed by instrumental detection method, and methyl mercaptan was exceeded over 3,571 times of threshold. In addition, result of contribution of odor was methyl mercaptan (49.95 to 59.08%), hydrogen sulfide (20.43 to 29.27%), trimethylamine (8.82 to 13.42%) and acetaldehyde (9.17 to 11.35%). Other facilities were compared with the contribution of the odor using OQ and SOQ during the process. Sulfur compounds, acetaldehyde, and trimethylamine are high contribution of odor using OQ as well as odor intensity of grinding process is highest. As a result, sulfur compounds (e.g., methyl mercaptan and hydrogen sulfide) are highest for OQ and SOQ of grinding process is highest as 7,067. The removal efficiency of deodorization equipment was more than 90.00% in ammonia and amines, but the average efficiency of sulfur compounds was 53.51%. Thus, this facility is more higher contribution of acetaldehyde and trimethylamine than other treatment facilities. And food waste treatment in environmental area needs to consider appropriate capacity and refers to other bio-filter operating conditions.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.24-45
• /
• 2002

For the last several decades, high-resolution shallow marine seismic technique has been used for various resources, engineering and geological surveys. Even though the multichannel method is powerful to image subsurface structures, single channel analog survey has been more frequently employed in shallow water exploration, because it is more expedient and economical. To improve the quality of the high-resolution seismic data economically, we acquired digital seismic data using a small air gun, 6 channel streamer and PC-based system, performed data processing and produced high-resolution seismic sections. For many years, such test acquisitions were performed with other studies which have different purposes in the area of off Pohang, Yellow Sea and Gyeonggi-bay. Basic data processing was applied to the acquired data and the processing sequence included gain recovery, deconvolution, filtering, normal moveout, static corrections, CMP gathering and stacking. Examples of digitally processed sections were shown and compared with analog sections. Digital seismic sections have a much higher resolution after data processing. The results of acquisition and processing show that the high-resolution shallow marine seismic surveys using a small air gun, 6 channel streamer and PC-based system may be an effective way to image shallow subsurface structures precisely.

• Journal of Chest Surgery
• /
• v.40 no.1 s.270
• /
• pp.8-16
• /
• 2007

Background: We performed a prospective clinical study to evaluate the ultrastructural integrity of the myocardium after using Histidine-Tryptophan-Ketoglutarate (HTK) solution in comparison with blood cardioplegic solution during congenital heart surgery. Material and Method: Twenty two patients with acyanotic heart disease, who were scheduled for elective open heart surgery, were randomized into two groups. The HTK Group (n=11) received HTK cardioplegic solution; the blood group (n=11) received conventional blood cardioplegic solution during surgery. The preoperative diagnoses included ventricular septal defect (n=9) and atrial septal defect (n=2) in each group. A small biopsy specimen was taken from the right ventricle's myocardium, and this was processed for ultrastructural examination at the end of 30 minutes of reperfusion. Semiquantitative electron microscopy was carried out 'blindly' in 4 areas per specimen and in 5 test fields per area by 'random systematic sampling' and 'point and intersection counting'. The morphology of the mitochondrial membrane and cristae were then scored. The interstitial edema of the myocardium was also graded. Result: The semiquantitative score of the mitochondrial morphology was $19.65{\pm}4.75$ in the blood group and $25.25{\pm}5.85$ in the HTK group (p=0.03). 6 patients (54.5%) in the blood group and 3 patients (27.3%) in the HTK group were grade 3 or more for the interstitial edema of the myocardium. Conclusion: The ultrastructural integrity was preserved even better with HTK solution than with conventional blood cardioplegic solution.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.453-461
• /
• 2011

This study is to derive a project model based on potential demand for Korean-style houses, focusing on new town detached housing sites that LH supplies and to test validity of the derived model and to present the direction and supply methods of the projects. The existing high-class new town Korean-style housing developments that have been considered were found to have little business value due to problems in choice of location and discordance of demand, so 6 types of projects were established through the methods of changes in planned scale, combined use, and subdivision of plot of land based on the results of survey. The type that has the highest business value among the project models was block-type multifamily houses, and this can be interpreted as the increase in total construction area leading to increase inrevenues of allotment sales due to economies of scale. The feasibility of mass housing model in which small-scale Korean-style houses are combined with amenities was found to be high, and if the same project conditions as those of the block-type multifamily houses are applied, the business value of the Korean-style tenement houses was found to be high. Besides, the high-class housing models within block-type detached housing areas are typical projects that the private sector generally promotes, and the construction cost was found to be most expensive with 910 million won per house. In order to enhance the business value of the Korean-style housing development, collectivization such as choice of location, diversification of demand classes, optimization of house sizes, and combination of uses is needed. And in order to adopt Korean-style houses in the detached housing sites, the adjustments and division of the existing planned plots are needed, and the strategies to cope with new demand through supplying Korean-style housing types of sites can be suggested. Also breaking away from the existing uniform residential development methods, the development method through supplying original land that is natural land not yet developed besides basic infrastructures (main roads and water and sewage) can be considered, and as the construction of more than 1~2 stories building is impossible due to the structure of Korean-style house roof and furniture. So it can be suggested that original land in the form of hilly land is considered to be most suitable to large-scale development projects.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.189-194
• /
• 2008

Middle-infrared (MIR) spectral region between 3.0 and $5.0\;{\mu}m$ in wavelength is useful for observing high temperature events such as volcanic activities and forest fire. However, atmospheric effects and sun irradiance in day time has not been well studied for this MIR spectral band. The objectives of this basic study is to evaluate atmospheric effects and eventually to estimate surface temperature from a single channel MIR image, although a typical approach utilize split-window method using more than two channels. Several parameters are involved for the correction including various atmospheric data and sun-irradiance at the area of interest. To evaluate the effect of sun irradiance, MODIS MIR images acquired in day and night times were used for comparison. Atmospheric parameters were modeled by MODTRAN, and applied to a radiative transfer model for estimating the sea surface temperature. MODIS Sea Surface Temperature algorithm based upon multi-channel observation was performed in comparison with results from the radiative transfer model from a single channel. Temperature difference of the two methods was $0.89{\pm}0.54^{\circ}C$ and $1.25{\pm}0.41^{\circ}C$ from the day-time and night-time images, respectively. It is also shown that the emissivity effect has by more largely influenced on the estimated temperature than atmospheric effects. Although the test results encourage using a single channel MR observation, it must be noted that the results were obtained from water body not from land surface. Because emissivity greatly varies on land, it is very difficult to retrieval land surface temperature from a single channel MIR data.