• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.56-62
• /
• 2013

The occurrence of the ventricular fibrillation is directly dependent on the magnitude and duration of the current. The current which flows through the human body is proportional to the touch voltage applied across the body and is in inverse proportion to the impedances in the circuit. The circuit impedances consist of human body impedance, line impedance, equipment impedance, earth terminal impedance and impedance of shoes which a person put on. The impedance of shoes greatly affect the severity of the electric accidents. The human body impedances relevant to the contact areas, contact conditions, current paths and touch voltages are already determined in the IEC 60479-1. However, the impedance of shoes is ignored or substituted by a simple value because of the absence of the sufficient data. For example, the impedance of shoes plus ground contact resistance is postulated to be $1,000{\Omega}$ in the IEC 61200-612. In IEEE 80, the shoe resistance plus ground contact resistance is assumed to be bare foot with ${\rho}/4b{\Omega}$. In this paper, we measured and analyzed the impedance of shoes with respect to conditions such as applied weight, environment variables and voltages. The results showed that the impedance of shoes is dependent on environment variables regardless of the types of shoes. Most of shoes showed the correlation with the applied force, whereas a few shoes showed characteristics related to the applied voltage. In terms of severity of electric shock, one thirds of test samples indicated to be dangerous in saltwater conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.807-810
• /
• 2005

Constructed network test environment of wireless base for confidentiality guarantee of data and safe transmission that is transmited at Mobile node of Wireless Network environment in this paper. And, progressed research about IKEv2's Multiple-Key Exchange mechanism for efficient security transmission that use IPSec that is built-in to basis to IPv6 of Mobile environment. Have several key to single terminal to solve that is seam at hand off packet transmission process of Mobile Node in Wireless Network and Re-setting for Key and Re-exchange problem that happen frequently and studied technology that move. Key exchange protocol that is used for an experiment loads basically in MIPv6 and used IKEv2 protocol that is used for management and distribution of reliable encryption key between both end. Using network simulator of SSFNet(Scalable Simulation Framework Network Models) in this paper Key exchange delay value of IKEv2's security transmission analyzing comparison Performance measure and studied about problem and improvement way accordingly.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.345-356
• /
• 2004

In this paper, we present a design and implementation of a personalized broadcasting system using TV-Anytime metadata for providing personalized services. The TV-Anytime specifies metadata schema, metadata coding and delivery, and provides service models to provide personalized broadcasting content services at anytime when users want to consume using metadata, which includes ECG (Electronic Content Guide) and content descriptive information in a PDR (Personal Digital Recorder)-centric environment. The proposed personalized broadcasting system consists of a server that provides metadata binary-coding, encapsulation and multiplexing, and a client terminal that takes charge of de-multiplexing, metadata decoding, and metadata processing for personalized content accessing and consumption. This paper presents the details of the design of each functional module, and the evaluation results with a set of service scenarios in an end-to-end broadcasting test-bed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1948-1954
• /
• 2014

Advances in IT technology and modernization of AtoN(Aids to Navigation) facility has increased the unmanned operation of AtoN. However, in AtoN facilities, accessibility is low and it is not able to perform maintenance on the bad weather at the time. In connection with this, in this paper, by applying the protocol of the enhanced dual LED marine lantern, we implemented the short-range monitoring system for a mobile terminal. System implemented in this paper can be carried out confirm the operation status, inspection or control of the dual LED marine lantern at a short distance. Also, it is possible to reduce maintenance costs and prevent accidents during inspection of AtoN. At the same time, it enables the operation test easily without disassembling the product, effective AtoN operation is possible. We tested the system that has been implemented using prototype of the LED marine lantern and confirmed state informations and controlled the behavior of the system in real time.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.14 no.2
• /
• pp.118-124
• /
• 2001

The single dose toxicity of Injinhotang, a herbal drug for treatment of hepatic injuries. was evaluated in Sprague-Dawley rats. Injinhotang was once administered to both sexes of rats at the dose levels of 2000, 1000, 500, 250 and 125 mg/kg for oral route. After single administration, clinical signs were observed every day for 14 days and body weights were measured 5 times including initial measurement on day 0 (the days of administration). When observation period was over, the animals were sacrificed and macroscopic examination of major organs was conducted. In addition, the histopathological profiles of these major organs were also conducted. Neither significant clinical signs nor death after administration was observed during the observation periods except for soft feces or diarrhea. In addition, no abnormal necropsy findings, changes of body weight and histopathological profiles were observed at terminal necropsy in both sexes. From these results, it is considered that $LD_{50}$ of Injinhotang is over 2000 mg/kg in oral administration in both sexes of rats.

• The Journal of Korean Physical Therapy
• /
• v.28 no.1
• /
• pp.14-21
• /
• 2016

Purpose: The purpose of this study was to investigate examine how the kinematics and kinetics of lower limb joints were changed depending on the unstable shoes (US) during sit-to-stand task (SitTS). Methods: Nineteen healthy females were participated in this study. The subjects performed sit-to-stand task with US and barefoot. The experiment was repeated three times for each tasks with conditions. The kinematics and kinetics of lower limb joint were measured and analyzed using a 3-D motion analysis system. A paired t-test was utilised performed for to identificationy of changes in mean of angle, force, and moment between both the two conditions. Results: The results of this study showed kinematic differences in lower limb joints during SitTS based on the US. The hip, knee, and ankle angle showed statistically significant differences during SitTS. At the initial of SitTS, Tthe force and moment of the hip flexor, hip extensor, knee flexor, knee extensor, ankle flexor, and ankle extensor showed statistically significant differences. At the terminal of SitTS, Tthe force and moment of the hip flexor, hip extensor, knee flexor, knee extensor, ankle flexor, and ankle extensor showed statistically significant differences. At the maximum of SitTS, Tthe moment of the hip extensor showed statistically significant differences. The force and moment of the ankle flexor, extensor moment showed statistically significant differences. Conclusion: Therefore, Wwearing US is considered to influence on the lower limb joints kinematics and kinetics during SitTS movements, and thus suggests the possibility that of reducing the risks of pain, and osteoarthritis caused by changes in the loading of lower limb joints.

• Korean Journal of Clinical Laboratory Science
• /
• v.37 no.3
• /
• pp.212-215
• /
• 2005

Carpal tunnel syndrome (CTS) is the most common entrapment neuropathy in clinical practice, with a 0.1% life time risk in the general population. Conventional neurophysiological studies have been useful in the diagnosis of this condition, as have a number of more specialized procedures. Therefore, we evaluated the diagnostic sensitivities of several parameters in nerve conduction technique for CTS patients. We analyzed 100 patients (159 hands) who were diagnosed with CTS clinically and electrophysiolosically. Median motor and sensory nerve conduction velocities (MCV and SCV) with wrist, palm, and finger stimulation were performed in traditional methods. Sensitivities of each test were calculated and compared to normal control data. The sensitivities of existing nerve conduction method were noted in terminal latency on median nerve, 2nd finger-wrist segment, 3rd finger-wrist segment, palm-wrist segment and distoproximal ratio, as 72.96%, 92.45%, 94.34%, 94.97%, and 97.48%, respectively. In the early course of CTS, sensory nerve conductions in the median nerve are more valuable than motor nerve conduction. Sensory nerve conductions are usually affected before motor nerve conductions in CTS. In this study, we detected that slowing of median SCV was the most frequent in the distoproximal ratio.

• Korean Medical Education Review
• /
• v.18 no.2
• /
• pp.65-82
• /
• 2016

This study aimed to identify curriculum gaps and a pilot study to provide the programs for selection during clerkship. Over the course of a clerkship, students analyze the current level and the needs level of TLO (terminal learning objectives) based on the book "Learning outcome of basic medical education: Scientific concept and principle-centered." We conducted a needs assessment utilizing a t-test, Borich Needs Assessment, and the Locus for Focus model. In the investigation of the needs level, the levels of the musculoskeletal and respiratory systems were relatively high and in the investigation of the current level, the levels of the digestive and musculoskeletal systems were relatively high. This study is expected to contribute to reasonable decision-making by utilizing various methods of analysis and providing in-depth results of needs analysis in designing clerkship curriculum.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.247-253
• /
• 2008

In this paper, we describes the design and implementation of real-time management system for efficient operation via monitoring and control of MCC(Motor Control Center). The real-tine management system can be divided hardware(MCC panel) and software(management program). First, hardware is divided into load attaching motor and MCC components for working together control and data network. Second, software(management system) are consisted of communication interface, environment setting, data processing modules. The produced and implemented reduction model of MCC panel is pretested using m-PRO, iM-PRO devices, and HyperTerminal. For field test, MCC panel is tested by RS-232C/485, communication procedure in management system is certified by transmitting and receiving message using control command. By the experimental results, the implemented real-time management system can be used to operate MCC system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.124-130
• /
• 2007

RFID technology is considered as a promising solution to increase efficiency of port logistics. Especially active RFID technology, such as e-Seal for container security, is receiving attention nowadays. If active RFID system is combined with passive RFID and legacy bar-code system overall efficiency of port logistics can be improved However, due to the device dependent control interface of RFID readers, there are many difficulties in making active-passive combined RFID system environment. In this paper, we introduce Smart Reader Interface (SRI) system, which provides a device independent RFID reader interrace to control different kinds of RFID readers by hiding device dependent control interface through adapter architecture which is similar to device driver of conventional operating systems. The key design objectives of SRI are the followings; conformance to the related standard. efficiency in processing, easy addition of an adapter for a new RFID reader. Actually, the implemented SRI system can support various kinds of commercial RFID readers, and through the test carried out not only in laboratory but also in the container terminal in the GwangYang Port, its practicality is verified.