• Journal of the Korean Data and Information Science Society
• /
• 제25권5호
• /
• pp.971-986
• /
• 2014

동시에 여러 개의 가설검정 수행시 귀무가설이 참일 경우 귀무가설을 기각할 확률이 커지는 문제가 발생한다. 이러한 다중검정 문제 해결을 위해 여러 연구에서는 가설검정시 필요한 집단별 오류율(FWER; family-wise error rate), 위발견율 (FDR; false discovery rate) 또는 위비발견율 (FNR; false nondiscovery rate) 과 통계량을 고려하여 검정력을 높이고자 하였다. 본 연구에서는 T 통계량, 수정된 T 통계량, 그리고 LPE (local pooled error) 통계량 기반 P값을 이용한 Bonferroni (1960) 방법, Holm (1979) 방법, Benjamini와 Hochberg (1995) 방법과 Benjamini와 Yekutieli (2001) 방법 그리고 Z 통계량 기반 Sun과 Cai (2007) 방법을 고찰하고 모의실험을 통해 다중검정 능력을 비교하였다. 또한 실제 데이터로 애기장대 유전자 발현 데이터에 대해 여러 가지 다중검정법을 통해 유의한 유전자들을 선별하였다.

• The Plant Pathology Journal
• /
• 제17권1호
• /
• pp.62-66
• /
• 2001

Detection of Xanthomonas axonopodis pv. citri (Xac) on citrus fruits for exporting is usually made by bacteriophage test (BPT) to demonstrate the pathogen-free status. BPT has rather time-consuming and complicate procedures for dealing with massive samples to be inspected. In this study, enzyme-linked immunosorbent assay (ELISA) was applied to detect Xac on fruits, and compared with BPT. In ELISA, positive reactions occurred in the bacterial densities of $3\times10^5$ cells/ml or more. To detect the bacterial infection on citrus fruits with a density of lower than $3\times10^5$ cells/ml, the bacterial suspensions were mixed with fruit rinse water and incubated in broth medium. Ordinary peptone sucrose broth (PSB) was not a proper medium for increasing Xac density specifically enough to be detect by ELISA. On the other hand, modified PSB (MPSP) amended with Fe-EDTA (0.25 g/$\ell$) and 2.5% potato-dextrose broth sufficed to differentiate uninfected and infected citrus fruits by ELISA after 24 h incubation of the fruit rinse water. Using various citrus samples from infected and uninfected fields, efficiencies in detecting Xac on fruits were compared between ELISA and BPT. For infected fruits samples, ELISA detected Xac by 100%, while BPT by about 44%, indicating that the detection efficiency was improved by 23.5% by ELISA, compared to BPT. In addition, ELISA has simpler procedures for testing and is less time-consuming than BPT, suggesting that ELISA may be accurate and simple method to detect Xac on citrus fruits.

• Archives of Pharmacal Research
• /
• 제27권7호
• /
• pp.720-726
• /
• 2004

Two Spectrophotometric procedures are presented for the determination of two commonly used H2-receptor antagonists, nizatidine (I) and ranitidine hydrochloride (II). The methods are based mainly on charge transfer complexation reaction of these drugs with either ${\rho}-chloranilic$ acid (${\rho}-CA$) or 2, 3 dichloro-5, 6-dicyanoquinone (DDQ). The produced colored products are quantified spectrophotometrically at 515 and 467 nm in chloranilic acid and 000 methods, respectively. The molar ratios for the reaction products and the optimum assay conditions were studied. The methods determine the cited drugs in concentration ranges of 20-200 and $20-160\;\mu\textrm{g}/mL$ for nizatidine and ranges of 20-240 and $20-140\;\mu\textrm{g}/mL$ for ranitidine with chloranilic acid and DDQ methods, respectively. A more detailed investigation of the complexes formed was made with respect to their composition, association constant, molar absorptivity and free energy change. The proposed procedures were successfully utilized in the determination of the drugs in pharmaceutical preparations. The standard addition method was applied by adding nizatidine and ranitidine to the previously analyzed tablets or capsules. The recovery of each drug was calculated by comparing the concentration obtained from the spiked mixtures with those of the pure drug. The results of analysis of commercial tablets and the recovery study (standard addition method) of the cited drugs suggested that there is no interference from any excipients, which are present in tablets or capsules. Statistical comparison of the results was performed with regard to accuracy and precision using student's t-test and F-ratio at 95％ confidence level. There is no significant difference between the reported and proposed methods with regard to accuracy and precision.

• Smart Structures and Systems
• /
• 제19권1호
• /
• pp.39-46
• /
• 2017

Finite element model updating is very effective procedure to determine the uncertainty parameters in structural model and minimize the differences between experimentally and numerically identified dynamic characteristics. This procedure can be practiced with manual and automatic model updating procedures. The manual model updating involves manual changes of geometry and analyses parameters by trial and error, guided by engineering judgement. Besides, the automated updating is performed by constructing a series of loops based on optimization procedures. This paper addresses the ambient vibration based finite element model updating of long span reinforced concrete highway bridges using manual model updating procedure. Birecik Highway Bridge located on the $81^{st}km$ of Şanliurfa-Gaziantep state highway over Firat River in Turkey is selected as a case study. The structural carrier system of the bridge consists of two main parts: Arch and Beam Compartments. In this part of the paper, the arch compartment is investigated. Three dimensional finite element model of the arch compartment of the bridge is constructed using SAP2000 software to determine the dynamic characteristics, numerically. Operational Modal Analysis method is used to extract dynamic characteristics using Enhanced Frequency Domain Decomposition method. Numerically and experimentally identified dynamic characteristics are compared with each other and finite element model of the arch compartment of the bridge is updated manually by changing some uncertain parameters such as section properties, damages, boundary conditions and material properties to reduce the difference between the results. It is demonstrated that the ambient vibration measurements are enough to identify the most significant modes of long span highway bridges. Maximum differences between the natural frequencies are reduced averagely from %49.1 to %0.6 by model updating. Also, a good harmony is found between mode shapes after finite element model updating.

• 전기전자학회논문지
• /
• 제25권3호
• /
• pp.571-577
• /
• 2021

본 논문에서는 자율주행자동차의 안전성 및 보안성을 보장하기 위해서 설계하고 검증하는 방법을 규정한 국제 표준인 ISO/TR 4804에 대해 다룬다. ISO/TR 4804는 자율주행자동차가 (1) 인간 운전자보다 훨씬 더 안전하고 (2) 타당하지 않은 위험이 없도록 하는 것을 목표로 하며, 이를 위해 12개의 안전성 및 보안성 원칙을 제시한다. 설계 과정에서는 (1) 안전성 및 보안성 원칙을 달성하는데 필요한 13개의 역량, (2) 이 역량을 수행하기 위해 필요한 하드웨어 및 소프트웨어 요소, (3) 이 요소를 결합한 논리적, 일반적인 아키텍쳐 등을 규정한다. 검증 과정에서는 (1) 안전성 및 보안성을 검증하기 위한 5개의 과업, (2) 이 과업을 완수하기 위한 테스트 목표, 플랫폼, 솔루션, (3) 시뮬레이션 방법 및 필드 운영 방법, (4) 하드웨어 및 소프트웨어 요소의 검증 방법 등을 규정한다. 특히 심층 신경망을 하나의 소프트웨어 요소로 간주하고, 심층 신경망이 적용된 자율주행자동차를 설계하고 검증하는 방법을 규정한다.

• The Journal of Advanced Prosthodontics
• /
• 제11권1호
• /
• pp.1-6
• /
• 2019

PURPOSE. The purpose of this in vitro study was to evaluate the effect of surface grinding and polishing procedures using high speed zirconia diamond burs with different grit sizes on the phase transformation and flexural strength of zirconia. MATERIALS AND METHODS. Forty disc shape specimens ($15{\times}1.25mm$) with a cylindrical projection in the center of each disc ($1{\times}3mm$) were fabricated with 3Y-TZP (Prettau, Zirkonzahn, Italy). The specimens were divided into 4 groups (n=10) according to the grinding and polishing procedures: Control group - grinding (coarse-grit diamond bur), Group 1 - grinding (coarse-grit diamond bur) + polishing, Group 2 - grinding (fine-grit diamond bur) + polishing, and Group 3 - grinding (fine grit diamond bur). Each specimen was analyzed by 3D-OM, XRD analysis, and biaxial flexural strength test. RESULTS. Based on the surface morphology by 3D-OM images, polished specimens showed smoother surface and lower roughness value (Ra). In the result of XRD analysis, partial phase transformation from tetragonal to monoclinic zirconia occurred in all groups. Control group, ground with a coarse grit diamond bur, showed more $t{\rightarrow}m$ phase transformation and lower flexural strength than Groups 1 and 2 significantly. CONCLUSION. The flexural strength in all specimens after grinding and polishing showed over 500 MPa, and those were clinically acceptable. However, grinding with a coarse grit diamond bur without polishing induced the phase transformation and low strength. Therefore, surface polishing is required for the occlusal adjustment using a high speed zirconia diamond bur to reduce the phase transformation and to prevent the decrease of flexural strength of zirconia.

• 여성건강간호학회지
• /
• 제27권4호
• /
• pp.379-387
• /
• 2021

Purpose: This study aimed to determine the actual state of childbirth in Korean women with natural childbirth and the degree of damage to the perineum during childbirth. Methods: This retrospective study analyzed the medical records of mothers who had natural childbirth at a hospital in Seoul, Korea in 2018. Data from 358 women with cephalic births at greater than 37 gestational weeks were analyzed. To determine natural childbirth characteristics and the degree of damage to the perineum, descriptive statistics were done. The difference in the degree of perineal injury according to obstetric characteristics was analyzed using independent t-test and one-way analysis of variance. Results: The mean age was 33.18±3.68 years, and 49.2% were primiparas, while 39% gave birth with a doula. The degree of perineal damage differed by age (F=9.15, p<.001), parity (t=19.13, p<.001), number of births in multiparity (F=3.68, p=.027), previous vaginal delivery in multiparity (F=3.00, p=.032) and birthing posture (F=7.44, p<.001). Having received therapeutic procedures (t=-4.62, p<.001), specifically fluid administration (t=-2.72, p=.007), oxygen supply (t=-2.76, p=.006) and epidural anesthesia (t=-2.77, p=.006) were statistically significant for perineal damage. There were no differences, however, by gestational period, doula use, water room use in labor, baby head circumference, or birth weight. Conclusion: Study findings suggest that support for older women, primiparas, and those who require therapeutic procedures may help to decrease the possibility of perineal damage during childbirth. As perineal damage was also associated with birthing posture, this should be considered when providing intrapartum nursing care.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권2호
• /
• pp.171-177
• /
• 2022

The purpose of this study was to investigate the effect of the characteristics of patients who underwent spinal nerve block on the fear of injection and the risk of radiation. Subjects were 137 patients (67 males, 70 females) who visited the Department of Anesthesiology and Pain Medicine in Cheongju. The method was conducted as a research study using a total of 28 questionnaires consisting of patient characteristics, experience characteristics of nerve block surgery, nerve block fear scale, and radiation risk perception scale. The reliability of the questionnaire response was secured with a Cronbach's alpha coefficient of 0.6 or higher. For statistical analysis, correlation was tested by descriptive statistics, frequency analysis, independent sample T-test, and Pearson and Spearman correlation coefficients by measurement scale and factor. As a result, the fear scale of nerve block was significantly higher in women than in men (p<0.05). The fear scale of nerve block injection was significantly higher in the first-visit patients than in the second-visited patients (p<0.05). However, there was no significant difference among all variables in radiation risk perception. In conclusion, patients undergoing spinal nerve block were more aware of the fear of injection than the risk of radiation exposure during the procedure.

• Animal Bioscience
• /
• 제36권2호
• /
• pp.275-283
• /
• 2023

Objective: This study was to evaluate standardized ileal digestibility (SID) of amino acids (AA) in fermented soybean meal (FSBM) for nursery pigs using both direct procedure and difference procedure when FSBM was added at 20% in diets. Methods: Forty-eight pigs at 9.2±0.9 kg body weight (BW) were individually housed and allotted to 4 treatments. Treatments included NFD (a semi-purified N free diet), FSD (a diet with 20% FSBM), CBD (corn basal diet), and CFD (corn basal diet:FSBM at 80:20). The FSD was used to measure AA digestibility in FSBM using the direct procedure, whereas CBD and CFD were used in the difference procedure. Pigs were fed for 10 days (0.09×BW^0.75 kg per day) and euthanized to collect ileal digesta for TiO₂ and AA. Results: Total endogenous AA loss was 12.1 g/kg of dry matter intake. The apparent ileal digestibility (AID) Thr was greater (p<0.05) and AID His (p = 0.073) and Leu (p = 0.052) tended to be greater using the direct procedure compared with the difference procedure. The SID Thr were greater (p<0.05) in FSBM for nursery pigs calculated using a direct procedure compared with a difference procedure. In addition, SID Lys in FSBM was about 83% to 88% for nursery pigs higher than SID Lys described in National Research Council (2012). Conclusion: The SID of AA in FSBM when included at practical levels using the direct procedure were similar to those from the difference procedure. Considering the SID of AA obtained using both direct and difference procedures, FSBM is an effective protein supplement providing highly digestible AA to nursery pigs. The SID of AA from this study was considerably higher than those previous reported. This study also indicates the importance of including the test feedstuffs at practical levels when evaluating digestibility.

• 한국항행학회논문지
• /
• 제27권5호
• /
• pp.621-628
• /
• 2023

본 연구는 항공기용 부품 및 장비품 중 치명성 부품인 수송류 항공기용 금속계 제동패드의 부품등제작자증명 및 부가형식증명을 위한 원 부품 등과 개발품의 설계 동일성 입증을 위한 역설계 절차를 도출하였다. 역설계 절차에 대한 규정은 우리나라의 경우 부품등제작자증명 지침에 의해 규정되며, 미국의 경우 AC No; 21.303-4에 규정되어 있다. 제동패드의 역설계 절차는 각 구성품별 샘플 수량, 치수공차, 기계적 물성 측정, 자재, 무게 및 부피특성 등의 동일성 확인 항목을 선정하여 각각의 세부 절차를 정의하였다. 아울러 우리나라 및 미국의 연방항공규정을 분석한 결과, 우리나라의 경우 수송류 항공기용 제동장치의 기술표준품 표준서 및 비행시험과 관련된 규정의 제정이 필요하다.