• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.561-564
• /
• 2006

The tensile characteristics of four types GFRP (glass fiber reinforced polymer) reinforcing bars with different resin mix proportions and fiber volume fraction were analyzed experimentally. Four types of GFRP reinforcing bars containing approximately 66 or 70% fiber volume fraction with A or B rein mix proportions were considered in this test. All testing procedures including specimens preparation, set-up of test equipments and measuring devices were made according to the recommendations of CSA Standard S806-02. From the test results, it was found that GFRP reinforcing bars containing approximately 70% fiber volume fraction with A rein mix proportion showed the higher tensile strength than that of the others due to the higher fiber volume fraction and proper resin mix proportion.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.201-204
• /
• 2005

The bond characteristics of two types hybrid FRP (fiber reinforced polymer) reinforcing bars with different rib geometry were analyzed experimentally. Two types of hybrid FRP. reinforcing bars such as spiral and cross type with different relative rib area were considered in this test. All testing procedures including specimens preparation, set-up of test equipments and measuring devices were made according to the recommendations of CSA Standard S806-02. From the test results, it was found' that cross type hybrid FRP reinforcing bars showed the higher bond strength than that of spiral type's due to the higher relative rib area.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.1
• /
• pp.45-50
• /
• 1998

This paper deals with some characteristics of a nondestructive eddy current detector to measure OPGW(Composite overhead ground wire with optical fiber) corrosion. This detector is designed to automatically run on OPGW and to continuously inspect the corrosion of the line. The impedance of the eddy current coil changing by any corrosion phenomenon of OPGW is analyzed. Several performances of the detector are described and experimental procedures and test results are also given. As a result, it is shown that the implemented detector can be measured some quantitative data for crack, broken wires or severe deteriorations in OPGW. This nondestructive test method would be applied to improve the reliability and efficiency of transmission line in service.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.1
• /
• pp.207-215
• /
• 2017

In this paper we study pooling effects in Bayesian testing procedures of independence for contingency tables from small areas. In small area estimation setup, we typically use a hierarchical Bayesian model for borrowing strength across small areas. This techniques of borrowing strength in small area estimation is used to construct a Bayes test of independence for contingency tables from small areas. In specific, we consider the methods of direct or indirect pooling in multinomial models through Dirichlet priors. We use the Bayes factor (or equivalently the ratio of the marginal likelihoods) to construct the Bayes test, and the marginal density is obtained by integrating the joint density function over all parameters. The Bayes test is computed by performing a Monte Carlo integration based on the method proposed by Nandram and Kim (2002).

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.293-294
• /
• 2009

정밀한 관측을 요하는 측량장비의 기능을 보정하거나 검증하는 것은 측량시 매우 중요한 일이다. ISO17123-8 규격은 GNSS RTK 정확도를 결정 할 때 사용되는 야외실험 절차와 규정을 명시하고 있으며 정확도 평가방법으로는 약식시험절차와 엄밀시험절차를 제시하고 있다. 본 연구에서는 GNSS RTK 정확도 평가방법 중 엄밀시험절차에 대해 시험할 목적으로 GNSS RTK 규격에 따라 Test-bed를 구축하였고 성능실험을 실시 위하여 GNSS RTK 규격에 제시된 정확도 평가방법을 적용하였다.

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.153-163
• /
• 2003

Electronic equipments and make other electronic systems to operate abnormally by means of electromagnetic interference, or can operate abnormally themselves by electromagnetic interference of other electronic systems. Therefore, electronic equipments are required to reduce their electromagnetic interference as small as for other systems to operate properly and operate properly within electromagnetic interference from other electronic systems. In order to prove that electronic equipments meet such requirements, they should undergo electromagnetic environmental test. In this study, we introduce electromagnetic environmental requirements, test procedures and test results of gimbal engine actuation system of KSR-III.

• Journal of Mechanical Science and Technology
• /
• v.19 no.9
• /
• pp.1821-1832
• /
• 2005

This study realizes the conceptual method to predict combustion instability in actual full-scale combustion chamber of rocket engines by experimental tests with model (sub-scale) chamber. The model chamber was designed based on the methodologies proposed in the previous work regarding geometrical dimensions and operating conditions, and hot-fire test procedures were followed to obtain stability boundaries. From the experimental tests, two instability regions are presented by the parameters of combustion-chamber pressure and mixture (oxidizer/fuel) ratio, which are customary for combustor designers. It is found that instability characteristics in the chamber with the adopted jet injectors can be explained by the correlation between the characteristic burning or mixing time and the characteristic acoustic time: In each instability region, dynamic behaviors of flames are investigated to verify the hydrodynamically-derived characteristic lengths of the jet injectors. Large-amplitude pressure oscillation observed in upper instability region is found to be generated by lifted-off flames.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.4 no.2
• /
• pp.39-44
• /
• 1998

We used recording device(EDR-3) to monitor the packages and the vehicle during shipment. Provided we did this enough times, we began to gain statistically valid information which could be used to describe the particular channel of distribution. The event was obviously changed from trip to trip, but in general we could have an idea of what to expect. Considerable amount of time and money were invested to record field data. Although not ideal, it was the best suited approach to gain information regarding a specific distribution channel. Based on the recorded field data, we could make our own packaging vibration testing specification through MIL-STD-810D(Guidance for development of laboratory dynamic test specification). This test specification was proved several times through field tests. As a result, we gained confidence in this revised vibration specification and come to know the development procedures of a laboratory dynamic test specification.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.127-131
• /
• 2008

In the disk braking of the railway trains, kinetic energy of the vehicles is converted into thermal energy by friction between a brake disk and the pad materials. This can be cause of the iterative thermal shock and generates thermal cracks on the brake disk surface. In this study, we show the comparative thermal fatigue test procedures and thermal crack analysis process to evaluate the thermal fatigue characteristics of candidate materials designed for development of heat-resistant brake disk material. We carried out tests on the conventional brake disk materials used for Saemaul and Mugunghwa trains, then we comparatively analyzed the thermal crack initiation and propagation on the surface of a specimen. A thermal fatigue test procedure and a crack analysis process were suggested to evaluate the heat resistance of the developed materials at later studies.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.498-503
• /
• 2000

A safety-related equipment for use in Nuclear Power Plant should be needed an Equipment Qualification. This paper presents the approach, methods, philosophies, and procedures for qualifying the large squirrel-cage induction electric pump motors for use in ULCHIN 5&6 Nuclear Power Plants. In this paper, the method of qualification is a combination of type test and analysis method, which is composed of Radiation exposure test, Seismic simulation test, Thermal aging analysis for non-metallic materials and Seismic analysis. It is found that the motor performs its safety function with no failure mechanism under postulated service conditions.