• Journal of Korean Neurosurgical Society
• /
• v.64 no.6
• /
• pp.933-943
• /
• 2021

Objective : Percutaneous pedicle screw (PPS) fixation is a needle based procedure that requires fluoroscopic image guidance. Consequently, radiation exposure is inevitable for patients, surgeons, and operation room staff. We hypothesize that reducing the production of radiation emission will result in reduced radiation exposure for everyone in the operation room. Research was performed to evaluate reduction of radiation exposure by modifying imaging manner and mode of radiation source. Methods : A total of 170 patients (680 screws) who underwent fusion surgery with PPS fixation from September 2019 to March 2020 were analyzed in this study. Personal dosimeters (Polimaster Ltd.) were worn at the collar outside a lead apron to measure radiation exposure. Patients were assigned to four groups based on imaging manner of fluoroscopy and radiation modification (pulse mode with reduced dose) : continuous use without radiation modification (group 1, n=34), intermittent use without radiation modification (group 2, n=54), continuous use with radiation modification (group 3, n=26), and intermittent use with radiation modification (group 4, n=56). Post hoc Tukey Honest significant difference test was used for individual comparisons of radiation exposure/screw and fluoroscopic time/screw. Results : The average radiation exposure/screw was 71.45±45.75 µSv/screw for group 1, 18.77±11.51 µSv/screw for group 2, 19.58±7.00 µSv/screw for group 3, and 4.26±2.89 µSv/screw for group 4. By changing imaging manner from continuous multiple shot to intermittent single shot, 73.7% radiation reduction was achieved in the no radiation modification groups (groups 1, 2), and 78.2% radiation reduction was achieved in the radiation modification groups (groups 3, 4). Radiation source modification from continuous mode with standard dose to pulse mode with reduced dose resulted in 72.6% radiation reduction in continuous imaging groups (groups 1, 3) and 77.3% radiation reduction in intermittent imaging groups (groups 2, 4). The average radiation exposure/screw was reduced 94.1% by changing imaging manner and modifying radiation source from continuous imaging with standard fluoroscopy setting (group 1) to intermittent imaging with modified fluoroscopy setting (group 4). A total of 680 screws were reviewed postoperatively, and 99.3% (675) were evaluated as pedicle breach grade 0 (<2 mm). Conclusion : The average radiation exposure/screw for a spinal surgeon can be reduced 94.1% by changing imaging manner and modifying radiation source from real-time imaging with standard dose to intermittent imaging with modified dose. These modifications can be instantly applied to any procedure using fluoroscopic guidance and may reduce the overall radiation exposure of spine surgeons.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.2
• /
• pp.119-130
• /
• 2021

Purpose : We aimed to validate a new manual therapy to treat tension type headache(TTH) by applying myofascial release techniques to the scalp and to examine the changes in the quality of life and the headache characteristics after treatment and at the 6-month follow-up. Methods : Thirty patients were recruited in this study and were assigned to two groups through simple random sampling. Fifteen patients were assigned to the manual therapy group (MT) and 15 patients to the scalp myofascial release technique (SMT) group. However, five patients from the MT group and one from the SMT group were excluded. Therefore, 24 patients with TTH (10 males, 14 females) participated in the study. Patients underwent either MT or SMT. The procedures were performed by a physical therapist twice per week for 4 weeks. The quality of life [using the brief pain inventory (BPI) and the headache impact test (HIT)], and the frequency, duration, and intensity of the headache [on a visual analog scale (VAS)] were assessed before and after the treatment, and at the follow-up. Results : After 4 weeks of SMT, the frequency (p<.001), duration (p<.05), and intensity (p<.001) of the headache and the quality of life (HIT; p <.001, BPI; p<.001) significantly improved in the patients with TTH. The improvement in these parameters remained significant even after 6 months of follow-up. Similarly, After 4 weeks of MT, the frequency (p<.05), duration (p<.05), and intensity (p<.01) of the headache, and the quality of life (HIT; p<.05, BPI; p<.001) significantly improved in the patients with TTH. The improvement in these parameters remained significant even after 6 months of follow-up. There was no significant difference in these parameters between the two groups. Conclusion : It has been suggested that MT using the SMT can be used as a non-invasive treatment to treat the frequency, duration, and intensity of the TTH, and to improve the quality of life.

• Korean Journal of Poultry Science
• /
• v.45 no.4
• /
• pp.237-244
• /
• 2018

In this study, to increase the survival rate of frozen/thaw rooster semen, standard protocols of semen thawing procedures were tested by computer-assisted sperm assay (CASA). We tested 4 different thawing protocols for frozen semen, $5^{\circ}C$ for 2 min, $35^{\circ}C$ for 30 s, $54^{\circ}C$ for 13 s, and $70^{\circ}C$ for 7 s. The pooled semen from 5 to 8 Ogye rooster line was diluted in the HS-1 diluent and frozen in 8% methylacetamide (MA) in liquid nitrogen vapors. To determine standard thawing method, straws were plunged into different temperatures and times. The resulting motilities were recorded by the CASA system. The results of this study showed that the best viability of the spermatozoa was shown by exposure at $5^{\circ}C$ for 2 min. Moreover, the longevity test of thawed sperm at $5^{\circ}C$ for 2 min also supported the higher viability under low temperature preservation of $17^{\circ}C$ for 1 hr. Further research is needed to increase the motility of thawed rooster semen for field application. In addition, the in vivo tests for different rooster lines are also needed for the establishment of avian genetic resource bank.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.167-181
• /
• 2019

Currently, the development of evaluation technology for vibration and shock load characteristics and spent nuclear fuel structural integrity under normal conditions of transport is being conducted in the Republic of Korea. This is the first such research conducted in the Republic of Korea and, thus, previous international studies need to be investigated and will be referred to in the ongoing project. Before 2000, several studies related to measurement of vibration and shock loads on spent nuclear fuel were conducted in the US. US national research institutes conducted uniaxial fuel assembly shaker tests, concrete block tests, and multi-axis fuel assembly tests between 2009 and 2016. In 2017, multi-modal transportation tests including road, sea, and rail transport were also performed by research institutes from the US, Spain and the Republic of Korea. Therefore, test preparation procedures, acceleration and strain measurement results, and finite-element and multi-body dynamics analysis were investigated. Based on the measured strain data, the preliminary conclusion was obtained that the measured strain was too small to cause damage to spent nuclear fuel rods. However, this conclusion is a preliminary conclusion that only reviews part of the results; a detailed review is being conducted in the US. The investigation of international studies on spent nuclear fuel structural integrity tests considering vibration and shock loads under normal conditions of transport in the US will be useful data for the project being conducted in the Republic of Korea.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.85-101
• /
• 2019

Recently, thank to the popularization of light-weight drone through the significant developments in computer technologies as well as the advanced automated procedures in photogrammetry, Unmanned Aircraft Systems have led to a growing interest in industry as a whole. Documentation, maintenance, and restoration projects of large scaled cultural property would required accurate 3D phenomenon modeling and efficient visual inspection methods. The object of this study verify on the accuracies achieved of 3D phenomenon reconstruction as well as on the validity of the preservation, maintenance and restoration of large scaled cultural property by UAS photogrammetry. The test object is cltural heritage(treasure 1324) that is the rock-carved standing Bodhisattva in Soraesan Mountain, Siheung, documented in Goryeo Period(918-1392). This standing Bodhisattva has of particular interests since it's size is largest stone Buddha carved in a rock wall and is wearing a lotus shaped crown that is decorated with arabesque patterns. The positioning accuracy of UAS photogrammetry were compared with non-target total station survey results on the check points after creating 3D phenomenal models in real world coordinates system from photos, and also the quantified informations documented by Culture Heritage Administration were compared with UAS on the bodhisattva image of thin lines. Especially, tests the validity of UAS photogrammetry as a alternative method of visual inspection methods. In particular, we examined the effectiveness of the two techniques as well as the relative fluctuation of rock surface for about 2 years through superposition analysis of 3D points cloud models produced by both UAS image analysis and ground laser scanning techniques. Comparison studies and experimental results prove the accuracy and efficient of UAS photogrammetry in 3D phenomenon modeling, maintenance and restoration for various large-sized Cultural Heritage.

• Journal of Convergence for Information Technology
• /
• v.9 no.9
• /
• pp.13-19
• /
• 2019

This paper analyzed the SCMS and pilot policy, which is pursued by the U.S. government in connected vehicles. SCMS ensures authentication, integrity, privacy and interoperability. The SCMS Support Committee of U.S. government has established the National Unit SCMS and is responsible for system-wide control. Of course, it introduces security policy, procedures and training programs making. In this paper, the need for SCMS to be applied to C-ITS was discussed. The structure of the SCMS was analyzed and the U.S. government's filot policy for connected vehicles was discussed. The discussion of the need for SCMS highlighted the importance of the role and responsibilities of SCMS between vehicles and vehicles. The security certificate management system looked at the structure and analyzed the type of certificate used in the vehicle or road side unit (RSU). The functions and characteristics of the certificates were reviewed. In addition, the functions of basic safety messages were analyzed with consideration of the detection and warning functions of abnormal behavior in SCMS. Finally, the status of the pilot project for connected vehicles currently being pursued by the U.S. government was analyzed. In addition to the environment used for the test, the relevant messages were also discussed. We also looked at some of the issues that arise in the course of the pilot project.

• The Korean Journal of Archival Studies
• /
• no.49
• /
• pp.247-275
• /
• 2016

The classification scheme of records indicates a table that intends to express organic relations between records by organizing records and enabling internal order. Although the principles of organic classification have remained in traditional records management environment, they have been changed to "function and business" in the modern times. Therefore, Korea introduced a business reference model (BRM) based on function and business from 2008 and subsequently implemented its operation. However, it has been pointed out that the roles of the classification scheme of records have not been played because the analysis of "Danwigwaje," which belongs to the lowest level of business reference models, is poor. According to this indication, the Gangbuk District of Seoul Special City established a functional classification scheme by executing a business process analysis of "Danwigwaje." First, the record manager carried out analyses on the principles of "Danwigwaje," small function, and "Danwigwaje." Then, the functional classification scheme of "Danwigwaje" was modified by looking into the opinion inquiry process of the treatment department and performing a test operation. Through the case of the Gangbuk District in Seoul Special City, analytical procedures and methods of "Danwigwaje," as well as implications according to the establishment of a functional classification scheme of basic local governments, were arranged in a written format.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.470-478
• /
• 2019

As the growth of the domestic defense industry is remarkable regarding technology level and export size, technology protection is necessary. Particularly, there is a need to apply anti-tamper measures to prevent critical technologies from illegally being taken out of weapon systems. However, there is no security protection strategy and system built yet in ROK. Precedent studies discussed the trend analysis and technical research for specific protective techniques, and the application of anti-tamper using limited procedures was provided. Recently, methods of how to select the technology for protection were studied based on risk management. Nonetheless, these studies cannot be associated with the acquisition process for the whole life-cycle, having difficulty with actual development and evaluation of the weapon systems. The objective of our study is to derive the system requirements of the weapon system for which anti-tamper measures have been determined to apply. Specifically, requirements items suitable for the development of anti-tamper weapon systems were derived based on ISO/IEC 19790, the CMVP standard for the development and verification of cryptographic modules. Also, its utilization in technical reviews and test & evaluations was presented. The usefulness of the research results was confirmed through inductive inference and comparative evaluation. The result can be expected to play a role in initiating extensive activities needed for technology protection of the weapon systems.

• Asian Journal for Public Opinion Research
• /
• v.7 no.2
• /
• pp.94-112
• /
• 2019

Objective: The objective of this study was to compare the quality of life (QOL) of patients with end-stage renal disease (ESRD) between patients receiving hemodialysis (HD) and patients receiving continuous ambulatory peritoneal dialysis (CAPD) and to compare personal characteristic factors relating to the quality of life in patients with ESRD. Method: This study used a descriptive research design. The sample was recruited using purposive sampling that included 76 ESRD patients receiving either HD or CAPD at a dialysis clinic in Phraphutthabat Hospital, Saraburi Province, Thailand. Data was collected using the Quality of Life Questionnaire for Chronic Kidney Disease ($KDQOL-SF^{TM}$) version 1.3. Independent t-test and ANOVA procedures were used to analyze study data. Results: The results revealed that the HD patients had a moderate level of QOL. The highest scoring dimension of QOL was the encouragement of staff at the dialysis unit and patient satisfaction with the treatment (${\bar{X}}=100$, SD=.00), followed by social support (${\bar{X}}=89.29$, SD =16.88) and cognitive function (${\bar{X}}=88.57$, SD=11.82). On the other hand, the lowest scoring QOL dimension was physical problems (${\bar{X}}=50$, SD=51.89), and pain (${\bar{X}}=50$, SD=39.03), followed by work status (${\bar{X}}=53.57$, SD=45.84) and burden from kidney disease (${\bar{X}}=58.48$, SD=31.07). The CAPD patients also had a moderate QOL. The highest scoring QOL dimension was the encouragement of staff in the renal unit and patient satisfaction with the treatment (${\bar{X}}=100$, SD=.00), followed by social support (${\bar{X}}=95.61$, SD=14.20) and cognitive function (${\bar{X}}=88.83$, SD=13.52). The worst scoring QOL dimensions were work status (${\bar{X}}=44.44$, SD=42.72), general health (${\bar{X}}=53.61$, SD=39.05), and pain (${\bar{X}}=62.70$, SD=41.14). The difference overall and in each dimension of QOL in ESRD patients who were treated with HD and CAPD was not statistically significantly different. The QOL was not significantly different among patients with different personal characteristics except for income and duration of treatment; in those cases, the difference in QOL was statistically significant (p=.05). Conclusion: The overall QOL and life expectancy of patients with ESRD treated with HD and CAPD are not affected by gender, age, marital status, education, occupation, or type of health coverage. QOL was not significantly different, except for patients with different incomes and duration of renal replacement therapy, whose QOL was significantly different. The QOL of patients receiving dialysis should be studied to develop a QOL program for patients with chronic kidney disease who receive dialysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.697-706
• /
• 2021

The purpose of this study is to find out whether the many start-up support programs provided by a college can actually help students start a business, and to discuss what role colleges should have as facilitators of student entrepreneurship. To this end, a qualitative study was conducted with seven students who wished to start a business by utilizing start-up education and support programs provided by College Y. As a result of the study, the participants first mentioned parallel and administrative inefficiency in entrepreneurship and the entrepreneurship programs. Second, the implications for the role of colleges in fostering start-up content are systematic planning and guidance for start-up programs operated by the college, concise administrative procedures, mentoring in various start-up items, and securing a test market. It can be said that the concept of a common office in which students can work together is necessary. The study is significant in that it can help to establish a start-up support plan by suggesting what role colleges should play in relation to entrepreneurship, but its limitation is that its scope includes only one specific major.