• The Journal of the Korea Contents Association
• /
• v.20 no.9
• /
• pp.99-106
• /
• 2020

Though it has been known that self-efficacy is a predictor to the successful L2 learning, the majority of studies on self-efficacy cases were targeted at secondary school students. This paper aims to explore the effects of the intermediate college students' essay writing experiences on their English self-efficiency. For this purpose, pre and post course surveys were conducted on a hundred or so freshmen who took intermediate college English classes which focused on improving English reading and writing skills. Interviews with teachers were also conducted in order to find out whether the differences of their teaching styles had any meaningful impact on their students' self-efficacy. Paired t-test was run on the responses of the post-questionnaire to identify any differences in the self-efficacies of the students before and after taking the classes, and the one-way ANOVA was conducted to find out whether the different instruction types had any significant impact on the differences. The results of the both analyses confirmed the differences of self-efficacies by the two predictors at a statistically significant level. Based on the findings of this paper, various types of writing assignments and efficient procedures of teachers' feedback need to be developed further in order to design and run an effective college English course which can contribute to enhancing self-efficacy of students.

• The KIPS Transactions:PartB
• /
• v.11B no.7 s.96
• /
• pp.759-768
• /
• 2004

Recently the biometric recognition technology is intensively studied and the standardization of the technology has been highly demanded for its commercialization. Currently many blometric recognition products are being developed based on the BioAPl(Biometric Application Program-ming Interface) specification. However, the reliable testing tools (or scenarios) to evaluate performance and conformance of the products are not shown yet. In this paper, a conformance testing method is presented, which verifies a biometric recognition system to meet the requirements of the BioAPl standard. Two different testing procedures are used in the proposed method. The first procedure evaluates that each functions offered in the BioAPl specification are correctly implemented and that the functions are actually used in the system. Through the Procedure, a BSP(Biometric Service Provider) system is executed on the framework of the BioAPl functions. It requires selection of parameters and prece-dent functions that should be executed first. The second procedure evaluates the abilities of module management, handling operations and ver-ification process by the analysis of the test cases. It tests the correctness of the system operation when a testing scenario is given. The proposed testing method is applied on a fingerprint verification BSP using the sample BSP provided by the BioAPl consortium. The experimental results shows the benefits of the proposed testing method.

• Journal of Oral Medicine and Pain
• /
• v.37 no.4
• /
• pp.243-250
• /
• 2012

Trigeminal nerve injuries due to invasive dental procedures such as implant surgery and extraction is one of the most serious issues in dentistry and may provoke medico-legal problems. Thus, for objective and reliable assessment of nerve injury, a need of QST (quantitative sensory testing) is emphasized and thermal threshold test is an essential part of QST, reported to have acceptable reliability in the orofacial region. This pilot study aimed to evaluate thermal thresholds for limited cases of trigeminal nerve injures. The study investigated 18 clinical cases with trigeminal nerve injuries who visited Department of Oral Medicine, Dankook Univeristy Dental Hospital during the period from May 2011 to Oct 2012. Thermal thresholds was measured by Thermal Sensory Analyzer, TSA-II (Medoc, Israel). Their CDT(cold detection threshold) was significantly decreased in the affected sides compared to the unaffected sides. Other parameters such as WDT(warm detection threshold), CPT(cold pain threshold) and HPT(heat pain threshold) did not show statistical difference between the affected and unaffected sides. Further researches are required to compare thermal thresholds relative to types of nerve deficits such as thermal hyper- or hypoesthesia and hyper- or hypoalgesia for larger sample.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.4
• /
• pp.216-220
• /
• 2011

PURPOSE. Heat of composite polymerization (HP) indicates setting efficacy and temperature increase of composite in clinical procedures. The purpose of this in vitro experimental study was to evaluate the effects of 5 temperatures on HP of two new composites. MATERIALS AND METHODS. From each material (Core Max II [CM] and King Dental [KD]), 5 groups of 5 specimens each were prepared and their total HPs (J/gr) were measured and recorded, at one of the constant temperatures $0^{\circ}C$, $15^{\circ}C$, $23^{\circ}C$, $37^{\circ}C$ and $60^{\circ}C$ ($2{\times}5{\times}5$ specimens) using a differential scanning calorimetry (DSC) analyzer. The data were analyzed using a two-way ANOVA, a Tukey's test, an independent-samples ttest, and a linear regression analysis (${\alpha}=0.05$). RESULTS. No polymerization reactions occurred at $0^{\circ}C$; then this temperature was excluded from statistical analyses. The mean HP of the remaining 20 KD specimens was $20.5{\pm}14.9$ J/gr, while it was $40.7{\pm}12.9$ J/gr for CM. The independent-samples t-test showed that there were significant differences between the HP of the two materials at the temperatures $15^{\circ}C$ (P=.0001), $23^{\circ}C$ (P=.0163), $37^{\circ}C$ (P=.0039), and $60^{\circ}C$ (P=.0106). Linear regression analysis showed statistically significant correlations between environment temperatures and HP of CM ($R^2=0.777$). CONCLUSION. Using CM is advantageous over conventional composite because of its better polymerization capacity. However due to its high HP, further studies should assess its temperature increase in vivo. Preheating KD is recommended. Refrigerating composites can negatively affect their polymerization potential.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.3
• /
• pp.246-254
• /
• 2008

STATEMENT OF PROBLEM: The cast abutment has advantages of overcoming angulation problem and esthetic problem. However, when a gold-machined UCLA abutment undergoes casting, the abutment surfaces in contact with the implant may change. PURPOSE: The purpose of this study was to compare the detorque values of prefabricated machined abutments with gold-premachined cast-on UCLA abutments before and after casting in two types of internal implant-abutment connection systems: (1) internal hexagonal joint, (2) internal octagonal joint. Furthermore, the detorque values of two implant-abutment connection systems were compared. MATERIALS AND METHODS: Twenty internal hexagonal implants with an 11-degree taper and twenty internal octagonal implants with an 8-degree taper were acquired. Ten prefabricated titanium abutments and ten gold-premachined UCLA abutments were used for each systems. Each abutment was torqued to 30 N㎝ according to the manufacturer's instructions and detorque value was recorded. The detorque values were measured once more, after casting with gold alloy for UCLA abutment, and preparation for titanium abutments. Group means were calculated and compared using independent t-test and paired t-test (${\alpha}$=0.05). RESULTS: The results were as follows: 1. The detorque values between titanium abutments and UCLA-type abutments showed significant differences in internal octagonal implants (P<0.05), not in internal hexagonal implants (P>0.05). 2. In comparison of internal hexagonal and octagonal implants, the detorque values of titanium abutments had significant differences between two connection systems on the initial analysis (P<0.05), not on the second analysis (P>0.05) and the detorque values of UCLA-type abutments were not significantly different between two connection systems (P>0.05). 3. The detorque values of titanium abutments and UCLA-type abutments decreased significantly on the second analysis than the initial analysis in internal hexagonal implants (P<0.05), not in internal octagonal implants (P>0.05). CONCLUSION: Casting procedures of UCLA-type abutments had no significant effect on screw loosening in internal implant-abutment connection systems, and UCLA-type abutments showed higher detorque values than titanium abutments in internal octagonal implants.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.479-484
• /
• 2013

PURPOSE. The aim of this study was to evaluate the effects of additional acid etching and curing mechanism (light-curing or self-curing) of a composite resin on the dentin bond strength and compatibility of one-step self-etching adhesives. MATERIALS AND METHODS. Sixteen human permanent molars were randomly divided into eight groups according to the adhesives used (All-Bond Universal: ABU, Clearfil S3 Bond: CS3), additional acid etching (additional acid etching performed: EO, no additional acid etching performed: EX), and composite resins (Filtek Z-250: Z250, Clearfil FII New Bond: CFNB). Group 1: ABU-EO-Z250, Group 2: ABU-EO-CFNB, Group 3: ABU-EX-Z250, Group 4: ABU-EX-CFNB, Group 5: CS3-EO-Z250, Group 6: CS3-EO-CFNB, Group 7: CS3-EX-Z250, Group 8: CS3-EX-CFNB. After bonding procedures, composite resins were built up on dentin surfaces. After 24-hour water storage, the teeth were sectioned to make 10 specimens for each group. The microtensile bond strength test was performed using a microtensile testing machine. The failure mode of the fractured specimens was examined by means of an optical microscope at ${\times}20$ magnification. The data was analyzed using a one-way ANOVA and Scheffe's post-hoc test (${\alpha}$=.05). RESULTS. Additional etching groups showed significantly higher values than the no additional etching group when using All-Bond Universal. The light-cured composite resin groups showed significantly higher values than the self-cured composite resin groups in the Clearfil S3 Bond. CONCLUSION. The additional acid etching is beneficial for the dentin bond strength when using low acidic one-step self-etch adhesives, and low acidic one-step self-etch adhesives are compatible with self-cured composite resin. The acidity of the one-step self-etch adhesives is an influencing factor in terms of the dentin bonding strength and incompatibility with a self-cured composite resin.

• Journal of the Korea Concrete Institute
• /
• v.18 no.3 s.93
• /
• pp.303-312
• /
• 2006

The main objective of this experimental study is to examine the feasibilities of each testing method with various kinds of grip systems for the analysis of tensile strength of GFRP(glass fiber reinforced polymer) reinforcing bars. Three types of grip systems were examined such as resin-sleeved pipe-type grip proposed by CSA(Canadian Standard Association), frictional resistance type metal grip by ASTM(American Standard for Testing and Materials) and wedge-inserted cone-type grip normally used in prestressing tendons. Also, mechanical properties of GFRP rebars with different surface deformations were investigated for each different type of testing grip used in this study. All testing procedures including specimens preparation, set-up of test equipments and measuring devices were made according to the CSA S806-02 recommendations. From the test results, it was found that the highest tensile strengths of GFRP rebars were observed when tested by resin-sleeved grip system regardless of their different surface deformations. But tensile strengths of GFRP rebars by ASTM grip system are only 10% less than those by CSA grip system. On the other hand, CSA grip is not only difficult to prepare but also not disposable. Therefore, ASTM grip system is recommended as a practical alternative to estimate the tensile strength of GFRP rebars.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.187-202
• /
• 2013

The electronic medical device industry and the relevant market have been greatly expanded owing to various factors, such as the advent of the aged society and the spread of the desire for well-being in developed countries, and rapid development of China, India and other emerging markets. The electrical stimulator is one of electronic medical devices most commonly used in homes. The electrical stimulator is widely used for pain relief, rehabilitation, muscle conditioning and others. Since it is mainly used in homes, it is very important to assure the safety and performance for protection of users. However, there is no guideline on evaluation of safety and performance of such electrical stimulator for home use. In this study, various local and foreign references were reviewed to develop the internationally harmonized procedures for safety and performance evaluation of the electrical stimulator and test items, specifications and methods are proposed. In addition, such proposed test items were validated to decide the internationally harmonized tests for safety and performance evaluation. This study will contribute to improvement of quality and safety of electrical stimulators for home use and help the Korean medical device industry have the international competitiveness.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.4
• /
• pp.19-33
• /
• 2008

Dynamic response measurements from natural excitation were carried out for 25- and 42-story buildings to evaluate their inherent properties, such as natural frequencies, mode shapes and damping ratios. Both are reinforced concrete buildings adopting a core wall, or with shear walls as the major lateral force resisting system, but frames are added in the plan or elevation. In particular, shear walls in a 25-story building are converted to frames from the 4th floor level downwards while maintaining a core wall throughout, resulting in a fairly complex structure. Due to this, along with similar stiffness characteristics in the principal directions, significantly coupled and closely spaced modes of motion are expected in this building, making identification rather difficult. By using various state-of-the-art system identification methods, the modal parameters are extracted, and the results are then compared. Three frequency-domain and four time-domain based operational modal identification methods are considered. Overall, all natural frequencies and damping ratios estimated from the different identification methods showed a greater consistency for both buildings, while mode shapes exhibited some degree of discrepancy, varying from method to method. On the other hand, in comparison with analysis results obtained using the initial finite element(FE) models, test results exhibited a significant difference of about doubled frequencies, at least for the three lower modes in both buildings. To improve the correlation between test and analysis, a few manual schemes of FE model updating based on plausible reasons have been applied, and acceptable results are obtained. The advantages and disadvantages of each identification method used are addressed, and some difficulties that might arise from the updating of FE models, including automatic procedures, for such large structures are carefully discussed.

• Spatial Information Research
• /
• v.17 no.1
• /
• pp.131-144
• /
• 2009

Recently, a lot of local autonomous entities are promoting Ubiquitous City(U-City) Construction by integrating Information Communication Technology(ICT) with city development, and also internationally, a lot of cities are making efforts to develop U-City to intensify a city's competitive strength and improve life quality of city dwellers. In keeping with such a stream of the times, each local autonomous entity and project developer are developing a lot of methodologies to establish optimal U-City in corresponding cities and also inquiring into a variety of development procedures, such as connecting existing urban development methods with information establishment methods. The method used usually is to establish Information strategy Plan(ISP) for a city which will be developed through consulting in the stage of city development planning. ISP is to establish vision & strategy for building the ubiquitous city and is a methodology including city vision, strategy, goal, and implementation method, etc. However, due to a lot of variables, such as a variety of city environment, establishment period, budget, information technology, and etc., it is difficult to contain establishment plans for every occasion in a similar method, in reality. Therefore, it is naturally necessary to suggest plans for city vision & strategy, and selection of element technology/service. Thus, this paper suggests models for vision & strategy establishment of U-City and suggests Top-Down Approach and Bottom-Up Approach method as a plan for U-City establishment. In addition, this paper analyzes general promotion methodologies for constructing U-City and analyzes how these two strategic methods [Top-Down Approach and Bottom-Up Approach] for city vision establishment are composed in such a methodology, to define and analyze its constituent plan.