• ETRI Journal
• /
• v.36 no.6
• /
• pp.942-952
• /
• 2014

This paper presents a novel test point insertion (TPI) method for a pseudo-random built-in self-test (BIST) to reduce the area overhead. Recently, a new TPI method for BISTs was proposed that tries to use functional flip-flops to drive control test points instead of adding extra dedicated flip-flops for driving control points. The replacement rule used in a previous work has limitations preventing some dedicated flip-flops from being replaced by functional flip-flops. This paper proposes a logic cone analysis-based TPI approach to overcome the limitations. Logic cone analysis is performed to find candidate functional flop-flops for replacing dedicated flip-flops. Experimental results indicate that the proposed method reduces the test point area overhead significantly with minimal loss of testability by replacing the dedicated flip-flops.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.650-658
• /
• 1998

The pressure level and the insertion loss at the receiving point behind finite length noise barriers are measured in an anechoic room by scale model test. The measured sound pressure level which are conducted under the several experimental conditions such as the length of the noise barrier, the distance between the noise barrier and the receiving point, the number of noise barriers, and the existence of the reflective building behind receiving point) and the insertion loss of a noise barrier having simple shape are well agreed with theoretical calculation which is based on Lam's model.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.935-942
• /
• 2000

In this paper we introduce a fast simplification algorithm for terrain height fields to produce a triangulated irregular network, based on the greedy insertion algorithm in [1,4,5]. Our algorithm partitions a terrain height data into rectangular blocks with the same size ad simplifies blocks one by one with the greedy insertion algorithm. Our algorithm references only to the points and the triangles withing each current block for adding a point into the triangulation. Therefore, the algorithm runs faster than the greedy insertion algorithm, which references all input points and triangles in the terrain. Our experiment shows that partitioning method runs from 4 to more than 20 times faster, and it approximates test height fields as accurately as the greedy insertion algorithms. Most greedy insertion algorithms suffer from elongated triangles that usually appear near the boundaries. However, we insert the four corner points into each block to produce the base triangulation of the block before the point addition step begins so that elongated triangles could not appear in th simplified terrain.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.3
• /
• pp.375-386
• /
• 2024

Autonomous weapon systems act according to artificial intelligence-based judgement based on recognition through various sensors. Test and evaluation for various scenarios is required depending on the characteristics that artificial intelligence-based judgement is made. As a part of this approach, this paper proposed a LiDAR point cloud augmentation method for mixed-reality based test and evaluation. The augmentation process is achieved by mixing real and virtual LiDAR signals based on the virtual LiDAR synchronized with the pose of the autonomous weapon system. For realistic augmentation of test and evaluation purposes, appropriate intensity values were inserted when generating a point cloud of a virtual object and its validity was verified. In addition, when mixing the generated point cloud of the virtual object with the real point cloud, the proposed method enhances realism by considering the occlusion phenomenon caused by the insertion of the virtual object.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.102-107
• /
• 1997

A stiffness in a dynamical system is numerically studied to investigate a sensitivity of a reactor to the delayed neutron spectra with the Doppler feedback. To test numerical procedure, we adopted a case of a reactivity accident in a point reactor model. We found that the stiffness is sensitive to a reactivity insertion rate and the delayed neutron spectra in the Doppler feedback phase. Our numerical results show that global reactor characteristics are not very sensitive to the delayed neutron spectra even though their instantaneous ones are sensitive. We present the time evolution of each precursor group explicitly.

• Journal of Periodontal and Implant Science
• /
• v.41 no.2
• /
• pp.79-85
• /
• 2011

Purpose: The aim of this study was to obtain objective and standardized information on masticatory function and patient atisfaction following second molar single implant therap. Methods: Twenty adult patient, who had restored second molar single implants more than 1 month before the study, were enrolled in this stud. All patients received a chewing test using peanuts before and after insertion of the implant prosthesi, with a questionnaire and visual analogue scale (VAS) to evaluate the effect of second molar single implant therap. Results: his study obtained standardized information on the masticatory function objectively (e.g., P, R, $X_{50}$) before (Pre-insertion) and after insertion (Post-insertion) of the implant prosthesis. Masticatory performance (P) after insertion of the implant prosthesis significantly increased from $67.8{\pm}9.9$ to $84.3{\pm}8.5$% (P<0.0001). With the implant prosthesis, the P value increased by 24%. The masticatory efficiency index (R) of Post-insertion is higher than that of Pre-insertion (P<0.0001). With the implant prosthesis, the R value increased by 29%. The median particle size ($X_{50}$) of Post-insertion is lower than that of Preinsertion (P<0.0001). More than 90% of the patients were satisfied with the second molar single implant therapy from a functional point of view. Conclusions: These findings indicate that a second molar single implant can increase masticatory function.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1069-1072
• /
• 1998

Recently the development of design and automation technology and manufacturing method, has reduced the cost of chip, but it becomes more difficult to test IC chip because test technique doesn't keep up with these techniques. In case of IC testing, obtaining test vectors to be able to detect good chip or bad one is very important, but according to increasing complexity, it is very complex and difficult. Another problem is that during testing, there could be capability of physical and electrical damage on chip. Also there is difficulty in synchronization between CUT (circuit under test) and Test equipment〔1〕. Because of these difficulties, built in self test has been proposed. Not only obtaining test vectors but also reducing test time becomes hot issues nowadays. This paper presents a new test BIST(built in self test) method. Proposed BIST implementation reduces test time and obtains high fault coverage. By searching internal nodes in which are inserted test_point_cells〔2〕and allocating TPG(test pattern generation) stages, test length becomes much shorter.

• Journal of Korean Academy of Nursing
• /
• v.44 no.4
• /
• pp.437-445
• /
• 2014

Purpose: This study was done to identify pain perception (P-PER) by nurses and pain expression (P-EXP) by patients in critical care units (ICUs) and degree of agreement between nurses' P-PER and patients' P-EXP. Methods: Nurses' P-PER was measured with a self-administered questionnaire completed by 99 nurses working in ICUs during May, 2013. Patients' P-EXP was measured with the Critical Care Non-Verbal Pain Scale through observations of 31 ICU patients during nine nursing procedures (NPs) performed between May and July, 2013. Results: Nurses' P-PER was from 4.49 points for nasogastric tube (NGT) insertion to 0.83 for blood pressure (BP) measurement based on a 9-point scale, Patients' P-EXP was 4.48 points for NGT to 0.18 for BP measurement based on a 10-point scale. Eight NPs except oral care showed higher scores for nurses' P-PER than for patients' P-EXP. Position change (p=.019), subcutaneous injection (p<.001), blood sugar test (p<.001), and BP measurement (p<.001) showed significant differences between nurses' P-PER and patients' P-EXP. Conclusion: Nasogastric tube (NGT) insertion was scored highest by both nurses and patients. Eight NPs except 'oral care' showed nurses' P-PER was higher or similar to patients' P-EXP, which indicates that nurses may overestimate procedural pain experienced by patients.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1260-1270
• /
• 2007

Testing and diagnosis of analog circuits(or mixed-signal circuits) continue to be a hard task for test engineers and efficient test methodologies to solve these problems are needed. This paper proposes a novel analog circuits test technique using time slot specification (TSS) based built-in current sensors (BICS). A technique for location of a fault site and separation of fault type based on TSS is also presented. The proposed built-in current sensors and TSS technique has high testability, fault coverage and a capability to diagnose catastrophic faults and parametric faults in analog circuits. In order to reduce time complexity of test point insertion procedure, external output and power nodes are used for test points and the current sensors are implemented in the automatic test equipment(ATE). The digital output of BICS can be easily combined with built-in digital test modules for analog IC test.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.71-76
• /
• 2017

The electrical behavior and flexibility of the screen printed Ag circuits were investigated with infrared radiation sintering times and sintering temperatures. Electrical resistivity and radio frequency characteristics were evaluated by using the 4 point probe measurement and the network analyzer by using cascade's probe system, respectively. Electrical resistivity and radio frequency characteristics means that the direct current resistance and signal transmission properties of the printed Ag circuit. Flexibility of the screen printed Ag circuit was evaluated by measuring of electrical behavior during IPC sliding test. Failure mode of the Ag printed circuits was observed by using field emission scanning electron microscope and optical microscope. Electrical resistivity of the Ag circuits screen printed on Pl substrate was rapidly decreased with increasing sintering temperature and durations. The lowest electrical resistivity of Ag printed circuit was up to $3.8{\mu}{\Omega}{\cdot}cm$ at $250^{\circ}C$ for 45 min. The crack length arisen within the printed Ag circuit after $10{\times}10^4$ sliding numbers was 10 times longer than that of after $2.5{\times}10^4$ sliding numbers. Measured insertion loss and calculated insertion loss were in good agreements each other. Insertion loss of the printed Ag circuit was increased with increasing the number of sliding cycle.