• 제목/요약/키워드: Test of LNA

검색결과 34건 처리시간 0.028초

Ku-band 위성중계기내 광대약 도파관형 입력여파기에 대한 환경시험 수행에 관한연구 (Environmental test of wideband waveguide input filter in ku-band satellite transponder)

  • 유경완;박광량
    • 전자공학회논문지A
    • /
    • 제33A권4호
    • /
    • pp.84-91
    • /
    • 1996
  • Input filter for satellite communication transponder is the interface between the antenna and the receiver. It is used to provide the selection of the uplink signals with minimum insertion loss and to prevent downlink signals form reaching the LNA. This paper is intended to provide a description of the input filter for KOREASAT communication transponder. Included are description for the electrical and mechanical design and the requirments of environmental test. In expecting the electrical performine the optimum electrical configuration ot meet all requirements are performed. Mechanical requirements are charactersed by several constraints for weight, size of the filter and its type of input output interface. The standardized environmental tests are performed to confirm satisfactory performance of the filter with respect to the requirements of vibration and thermal vacuum shocks.

  • PDF

입력 매칭 측정을 이용한 RF Front End의 새로운 결함 검사 방법 (Novel Defect Testing of RF Front End Using Input Matching Measurement)

  • 류지열;노석호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2003년도 추계종합학술대회
    • /
    • pp.818-823
    • /
    • 2003
  • 본 논문에서는 입력 매칭(input matching) BIST(Built-In Self-Test) 회로를 이용한 RF font end의 새로운 결함 검사방법을 제안한다. BIST 회로를 가진 RF front end는 1.8GHz LNA(Low Noise Amplifier: 저 잡음 증폭기)와 이중 대칭 구조의 Gilbert 셀 믹서로 구성되어 있으며, TSMC 0.25$\mu\textrm{m}$ CMOS 기술을 이용하여 설계되었다. catastrophic 결함 및 parametric 변동을 가진 RF front end와 결함을 갖지 않은 RF front end를 판별하기 위해 RF front end의 입력 전압 특성을 조사하였다. 본 방법에서는 DUT(Device Under Test: 검사대상이 되는 소자)와 BIST 회로가 동일한 칩 상에 설계되어 있기 때문에 측정할 때 단지 디지털 전자계와 고주파 전압 발생기만이 필요하며, 측정이 간단하고 비용이 저렴하다는 장점이 있다. BIST 회로가 차지하는 면적은 RF front end가 차지하는 전체면적의 약 10%에 불과하다. 본 논문에서 제안하는 검사기술을 이용하여 시뮬레이션해 본 결과 catastrophic 결함에 대해서는 100%, parametric 변동에 대해서는 약 79%의 결함을 검출할 수 있었다.

  • PDF

한국 성인의 지방산 섭취와 복부비만 및 고혈당과의 관련성 -1998~2007 국민건강영양조사 자료에 근거하여- (Fatty Acids Intake and Its Association with Abdominal Obesity and Hyperglycemia in Korean Adults: Korea National Health and Nutrition Survey, 1998~2007)

  • 박용순;박효진;원선임
    • 동아시아식생활학회지
    • /
    • 제22권2호
    • /
    • pp.147-162
    • /
    • 2012
  • Abdominal obesity is an important factor of metabolic syndrome and is known as an independent risk factor of cardiovascular disease. The purpose of this study was to examine the fatty acid intake pattern as well as the association between fatty acid intake and abdominal obesity and hyperglycemia in Korean adults. This study was based on data from the Korea National Health and Nutrition Examination Surveys (KNHANES) I, II, III, and IV. After excluding subjects who had missing data for dietary intakes, anthropometric measurments, and laboratory tests, a total of 12,320 subjects aged 20~64y (5,266 men and 7,054 women) were included in the study. Trends in individual consumption of dietary fatty acids by year were analyzed by One-way ANOVA test, and the association between fatty acid intake and abdominal obesity and hyperglycemia was analyzed by logistic regression analysis after adjusting for age, energy intake, marital status, job, education level, alcohol intake, and smoking status. In men, intakes of TFA, SFA, MUFA, FUFA, and n-6 PUFA significantly increased with year. On the other hand, intakes of TFA, SFA and FUFA significantly increased with year in women. Logistic regression analysis showed that the risk of abdominal obesity was significantly associated with intakes of PUFA, LNA and n-3 PUFA in women. However, there was no association with any fatty acid intakes in men. The risk of hyperglycemia was significantly and positively associated with intakes of TFA, SFA, PUFA, and LNA in men, but, there was no significant association with any fatty acid intakes in women. These results show that abdominal obesity and hyperglycemia are significantly associated with individual intake of fatty acids, suggesting that fatty acid type may be associated with risk of abdominal obesity and hyperglycemia. Futher, the macronutrients of measl must be properly balanced.

900MHz GSM 디지털 단말기용 Si BiCMOS RF송수신 IC개발 (I) : RF수신단 (An Integrated Si BiCMOS RF Transceiver for 900 MHz GSM Digital Handset Application (I) : RF Receiver Section)

  • 박인식;이규복;김종규;김한식
    • 전자공학회논문지S
    • /
    • 제35S권9호
    • /
    • pp.9-18
    • /
    • 1998
  • 본 논문에서는 E-GSM 단말기용 Transceiver RFIC 칩 수신단의 회로설계, 제작 및 특성측정을 수행하였다. AMS사의 0.8${\mu}m$ 실리콘 BiCMOS 공정을 사용하여 $10 {\times} 10 mm$ 크기를 갖는 80핀 TQFP 패키지로 제작하였으며, 동작전압 3.3V에서 우수한 RF 성능을 얻었다. 제작된 RFIC의 수신단에는 LNA, Down Conversion Mixer, AGC, SW-CAP 및 Down Sampling Mixer를 포함하고 있으며, 제작된 RFIC의 사용 주파수 범위는 925 ~ 960MHz, 전류소모는 67mA, 최소검출레벨은 -105dBm의 특성을 얻었다.

  • PDF

Ku-대역 위성 방송 수신 시스템을 위한 저잡음 증폭기의 설계 및 제작 (Design and Fabrication of An LNA for The Reception of The Ku-Band Satellite Broadcast Signals)

  • 주지한;이석곤;전병태;안병철
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
    • /
    • pp.451-454
    • /
    • 2002
  • In this paper, a low-noise amplifier is designed and fabricated using the HJFET for the reception of the Ku-band satellite broadcast signals. The optimum input and output reflection coefficients of each amplifier stage are obtained by the trade-off between the stable gain and the noise figure circle. The amplifier performance is simulated and optimized using a microwave CAD software. The designed amplifier is fabricated and tested. Results of the test show a gain of 17.0 dB, a gain flatness of less than $\pm$2.BdB, the noise figure of less than 1.0 dB, and the input and output reflection coefficient of less than -10 dB.

  • PDF

ISM 밴드 RF 모듈의 수신감도 향상에 관한 연구 (The Research about improvement of receive sensitivity for RF module in ISM band)

  • 이혁진;양오
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
    • /
    • pp.613-616
    • /
    • 2002
  • This paper has been studied an improvement of receive sensitivity for RF module of Industrial Scientific Medical(ISM) Band. In the paper, Also this paper handles receive sensitivity progress of RF module in ISM band. how to improve receive sensitivity adds to Surface Acoustic Wave(SAW) filter, Low Noise Filter(LNA), etc and insulates receiver and transmitter. And then the circuit is inspected by the effective range test of receiver and transmitter. And this Paper was designed that micro-controler controls the part of RF by software.

  • PDF

RF Front End의 결함 검출을 위한 새로운 온 칩 RF BIST 구조 및 회로 설계 (New On-Chip RF BIST(Built-In Self Test) Scheme and Circuit Design for Defect Detection of RF Front End)

  • 류지열;노석호
    • 한국정보통신학회논문지
    • /
    • 제8권2호
    • /
    • pp.449-455
    • /
    • 2004
  • 본 논문에서는 입력 정합(input matching) BIST(Built-In Self-Test, 자체내부검사) 회로를 이용한 RF front end(고주파 전단부)의 새로운 결함 검사방법을 제안한다. 자체내부검사 회로를 가진 고주파 전단부는 1.8GHz LNA(Low Noise Amplifier, 저 잡음 증폭기)와 이중 대칭 구조의 Gilbert 셀 믹서로 구성되어 있으며, TSMC 40.25{\mu}m$ CMOS 기술을 이용하여 설계되었다. catastrophic 결함(거폭 결함) 및 parametric 변동 (미세 결함)을 가진 고주파 전단부와 결함을 갖지 않은 고주파 전단부를 판별하기 위해 고주파 전단부의 입력 전압특성을 조사하였다. 본 검사방법에서는 DUT(Device Under Test, 검사대상이 되는 소자)와 자체내부검사회로가 동일한 칩 상에 설계되어 있기 때문에 측정할 때 단지 디지털 전압계와 고주파 전압 발생기만 필요하며, 측정이 간단하고 비용이 저렴하다는 장점이 있다.

900MHz대역 수신기용 RF 특성평가보드의 설계 및 제작 (Design and Fabrication of RF evaluation board for 900MHz)

  • 이규복;박현식
    • 마이크로전자및패키징학회지
    • /
    • 제6권3호
    • /
    • pp.1-7
    • /
    • 1999
  • 본 연구에서는 900MHz대역 수신기용으로 선행 개발되어진 RF 칩세트를 장착한 RF 특성평가 보드를 개발하였으며, 환경평가시험을 수행하였다. 선행 개발되어진 RF-IC 칩에는 저잡음증폭기, 하향변조 주파수혼합기, AGC Amp, SW-CAP 필터 등을 포함하고 있으며, 이에 따른 정합회로와 RF/IF SAW 필터, 듀플렉서 필터 및 전원공급회로를 RF 특성평가보드에 첨가하여 제작하였다. 공급전원은 2.7에서 3.6V이며, RF 보드의 소모전류는 42mA로 나타났으며, 동작 주파수는 RF 입력이 925~960MHz으로 제작, 측정되었다. 측정결과 일반적인 900MHz용 디지털 이동통신단말기의 RF 수신특성과 유사하게 양호한 결과를 보였다.

  • PDF

Ka-Band의 집적화된 송수신 모듈 개발 (Integrated Transceiver Module development at Ka-Band)

  • 김완식;정연만;김계국
    • 한국컴퓨터정보학회논문지
    • /
    • 제11권5호
    • /
    • pp.267-272
    • /
    • 2006
  • 본 논문에서는 레이더에 사용할 수 있는 집적화, 소형화된 Ka-band용 송수신 모듈을 설계 및 제작하였다. 캐비티 형태의 공진기 및 MMIC의 VCO, 전력증폭기, 저잡음 증폭기, 주파수 혼합기와 직접 설계, 제작한 수동 소자들을 캐리어에 장착시키고, 이 캐리어들을 직접 송수신 모듈에 연결하여 결과적으로 출력 21dBm, 잡음지수 5dB까지의 성능을 보이면서 $50cm^*50cm^*20cm$의 소형화된 크기로 설계하였다. 개발된 FMCW 송수신 모듈을 이용하여 60m 이상 떨어져 있는 목표물을 탐지할 수 있는 비트 신호와 하늘 및 땅에 대한 특성을 분석할 수 있는 라디오미터 신호를 측정하였다. MMIC로 구성된 Ka-band의 송수신 모듈은 레이다와 라디오미터용으로 우수한 성능을 가짐을 확인할 수 있었다.

  • PDF

Design of a High Dynamic-Range RF ASIC for Anti-jamming GNSS Receiver

  • Kim, Heung-Su;Kim, Byeong-Gyun;Moon, Sung-Wook;Kim, Se-Hwan;Jung, Seung Hwan;Kim, Sang Gyun;Eo, Yun Seong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제4권3호
    • /
    • pp.115-122
    • /
    • 2015
  • Global Positioning System (GPS) is used in various fields such as communications systems, transportation systems, e-commerce, power plant systems, and up to various military weapons systems recently. However, GPS receiver is vulnerable to jamming signals as the GPS signals come from the satellites located at approximately 20,000 km above the earth. For this reason, various anti-jamming techniques have been developed for military application systems especially and it is also required for commercial application systems nowadays. In this paper, we proposed a dual-channel Global Navigation Satellite System (GNSS) RF ASIC for digital pre-correlation anti-jam technique. It not only covers all GNSS frequency bands, but is integrated low-gain/attenuation mode in low-noise amplifier (LNA) without influencing in/out matching and 14-bit analogdigital converter (ADC) to have a high dynamic range. With the aid of digital processing, jamming to signal ratio is improved to 77 dB from 42 dB with proposed receiver. RF ASIC for anti-jam is fabricated on a 0.18-μm complementary metal-oxide semiconductor (CMOS) technology and consumes 1.16 W with 2.1 V (low-dropout; LDO) power supply. And the performance is evaluated by a kind of test hardware using the designed RF ASIC.