• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.776-781
• /
• 2010

In the ship-handling simulator, it is important for a ship manoeuvring model to represent the dynamic characteristic of a ship and to be simple for reducing calculation time. Especially, even if principal dimensions of a ship are given in initial design stage, or manoeuvring test data are only given by model or real ship's trials, simulations are often needed to check the manoeuvrability of a ship. In this paper, a simple manoeuvring model based on turning test data of a ship is mathematically developed. And the simulation results are verified by comparing with turning test results of a real ship.

• 드라이브 ㆍ 컨트롤
• /
• 제12권1호
• /
• pp.15-20
• /
• 2015

For testing a newly designed ship's steering gear, a steering gear test bench with a steering gear to be tested and a load generation part should be prepared. The load given to the steering gear has to be pertinent to the load generated in a targeted ship. In this study, the authors suggest a process of estimating the load given to steering gears in ships. At first, a test for measuring the load in the steering gear of a real ship was conducted. Then, a process was developed to compute rudder driving torque and force by using basic equations including some empirical equations on ship's steering. The test results and the computation results on the load in the steering gear were compared, As a result, the process suggested in this study for estimating load in ship's steering gears was verified.

• 해양환경안전학회지
• /
• 제17권4호
• /
• pp.383-389
• /
• 2011

선박 성능과 항해 안전의 관점에서 선박조종 특성을 아는 것은 선박 설계에서 중요한 일이다. IMO 규정에 의하면 만재 적하된 even 조건(트림=0)에서 몇가지 선박 조종 기준이 제시되어 있다. 그러나 선박은 일반적으로 항상 만재 적재 조건으로 운항되지 않는다. 따라서 선박이 IMO 규정을 만족시키고, 모든 적재 조건에서 안전하게 항행하도록 하기 위해 다양한 적재 조건에서 선박 조종 특성을 추정해야 한다. 본 논문에서 우리는 실선 실험과 시뮬레이션을 수행하여 조종특성을 조사하였다. 시뮬레이션 결과와 비교하였을 때 실선실험은 시뮬레이션 값 및 이전 연구와 그 경향이 일치한다. 실 해역에서 얻은 조종실험 데이터가 선박 조종성능 추정에 활용 될 수 있음을 확인하였고, 실시한 실해역 실험을 통하여, 선박 운항 상태에 따른 조종성의 변화를 추정할 수 있었다.

• 대한조선학회논문집
• /
• 제40권4호
• /
• pp.66-74
• /
• 2003

In non-contact underwater explosion shock test of a real naval ship, measurement of shock loadings and responses should require onboard system to be able to safely trigger an explosive and to simultaneously and successfully measure scores of shock signals in the deteriorated environment. For this purpose, we have developed a shock-hardened measurement system resistible to 170g peak acceleration having 4 msec duration by resiliently mounting general purpose measurement instruments in racks. The system can simultaneously measure and record 200 signals to evaluate shock leadings and responses of the test ship by triggering an explosive and measurement instruments at the same time. We prove the performance of the developed system by introducing the signal acquisition results from of a real ship underwater shock test, firstly performed in Korea.

• 한국항해항만학회지
• /
• 제38권6호
• /
• pp.593-600
• /
• 2014

실시간 해수유동 정보를 중심으로 신조선 선박의 실선시운전에서 활용될 수 있는 정보 제공 시스템을 개발하였다. 본 시스템에서는 실선시운전 지원 정보로서 특정시간 해수유동의 공간분포를 예측하여 제공하며, 특정지점 해수유동의 시계열 변동을 예측하여 제공한다. 또한 본 시스템은 실선시운전에 있어 시험선박 운항경로에서의 해수유동 정보 및 선속 손실정보를 제공하기 위하여 GPS와 연결할 수 있는 기능을 가지고 있으며, 이러한 기능을 이용하여 실선시운전시 자동으로 운항경로상의 해수유동 실시간 정보 및 해수유동에 의한 선속손실을 계산하여 제공한다. 실선시운전 중의 정보 제공 이외에, 본 시스템에서는 특정한 시험시간과 시험경로에 대해 선속손실을 예측하여 제공함으로써 최적의 시험시간 및 시험경로를 계획할 수 있도록 지원하는 기능도 가지고 있다. 본 연구에서 개발된 실선시운전을 위한 실시간 해수유동 예측시스템은 효율적인 시험계획과 정확한 해역특성 파악을 지원할 뿐 아니라, 실선에 탑재되어 시험 중에 요구되는 다양한 정보를 제공한다.

• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.181-188
• /
• 2011

A simulation technique, which simulate dynamic motion and communication environments of ship in the lab, is needed in order to reduce the testing cost when we evaluate the transfer alignment performance of shipboard INS. Hardware-In-the-Loop Simulation(HILS) can be used as an effective test method for those system because it can provide flexible and realistic simulation environments, various test scenario, and repeated test environment in the lab without additional cost and person. This paper presents the methods for implementing the real time HILS environment for testing transfer alignment performance of shipboard INS. It includes real time executive for controlling realtime simulation and calculating the ship motion, communication method for interfacing between the systems, and coordinate transformation method for converting real ship coordinate attitude data to lab coordinate attitude data.

• 한국시뮬레이션학회논문지
• /
• 제19권3호
• /
• pp.17-25
• /
• 2010

선박 조종 시뮬레이션을 구성하는 기동 모델은 대상 선박의 동역학적인 특성을 현실에 가깝게 구현해야 하며, 신속한 계산 및 결과 처리가 가능하여야 한다. 다중 선박을 대상으로 하는 실시간 조종 시뮬레이션에서는 계산 시간 단축을 위해 일반적으로 선회각이나 선회율, 또는 전진 속도에 대한 1차 미분방정식 모델을 사용하여 선박의 움직임을 구현하게 된다. 본 논문에서는 대상 선박의 선회 시험 정보가 주어져 있을 경우 이를 이용한 선박의 단순 기동 모델링 및 계수 추정법을 제안하였다. 전진속도가 일정한 모델과 전진 속도의 변화를 고려한 모델의 계수 추정법을 수학적으로 전개하였으며, 실선 선회 시험 자료를 이용하여 제안된 모델의 유용성을 검증하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2017년도 추계학술대회
• /
• pp.19-21
• /
• 2017

Ship maneuvering performance is usually estimated in calm water conditions which provide valuable information about the ship maneuvering characteristics at the early design stage. However, the course-keeping ability and the maneuvering performance of a ship can be significantly affected by the presence of waves when ship maneuvers in real sea condition. Therefore, it is necessary to understand the maneuvering behavior of a ship in waves in the viewpoint of ship safety in the design stage. In this study, the force and yaw moment acting on a moving ship in regular waves with different wave length and wave direction will be performed in the square wave tank in Changwon National University. The results of this study can be used to help a person to design a ship hull with the best ship maneuverability in waves and disseminate knowledge on predicting ship maneuvering in regular waves in various wave directions.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.32-42
• /
• 2006

This study aims at establishing a technique for sailing yachts model tests with sailing condition. It is very important to estimate a ship's potential speed performance before building a real ship. Several methods are used to estimate a ship's potential speed performance such as using parent ship data, standard vessel chart and model test. Model test is the most precise among these options. In korea. model testing is widely used with general vessels but not with sailing yachts. Because sailing yachts are propelled with heeling and leeway. using the wind. another method is needed to estimate their speed. The new model test. which is different from tests for upright general vessels, is in a great demand. In this paper. we describe a test method for the sailing yacht model test. based on Masuyama's equation of motion. And we describe choosing scale ratio. production process and materials of the model. Also. various ways of measuring instruments. attaching jigs and adjusting calibration are described so that they can be utilized as useful data for model testing.

• 대한조선학회논문집
• /
• 제60권6호
• /
• pp.450-459
• /
• 2023

According to Korea Maritime Safety Tribunal, there have been 14,100 maritime accidents from 2017 to 2021. Among those accidents, ship collision accidents have been up to 1,275 cases. But in the accidents relating to small ships like a fishing vessel, analyzing the causes of the accidents would depend on statements of the persons related because there is often no navigational data. But those statements can be incorrect and give rise to disagreements between them so that it causes conflicts with each other during the trial. So a replay system of ship collision accident (RESCA) has been developed in order to reproduce the ship collision accident by using AIS, V-PASS or radar data. But the reproduced trajectory of ship collision accident is needed to be verified because it can be unreasonable physically. So a method to verify the reproduced trajectory and collect the physical data on ship collision accident is newly designed by using free running test. In the RESCA, the accident is reproduced using the navigational data from the trajectory for a ship and measured from free running model test for the other ship at the same time. Through free running test, the behavior of the model ship is transformed from model scale into real scale. In order to check into the accuracy of the new method, free running model tests by using RESCA are carried out on the actual ship collision accidents.