• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.2
• /
• pp.72-77
• /
• 2007

Abrasive wear between piston ring face and cylinder liner is an extremely unpredictable and hard-to-reproduce phenomenon that significantly decreases engine performance. Wear by abrasion are forms of wear caused by contact between a particle and solid material. Abrasive wear is the loss of material by the passage of hard particles over a surface. From the pin-on-disk test, particle dent test and scuffing test, abrasive wear characteristics of diesel engine cylinder liner-piston ring have been investigated. Pin-on-disk test results indicate that abrasive wear resistance is not simply related to the hardness of materials, but is influenced also by the microstructure, temperature, lubricity and micro- fracture properties. In particle dent test, dent resistance stress decreases with increasing temperature. From the scuffing test by using pin-on-disk tester, scuffing mechanisms for the soft coating and hard coating were proposed and experimentally confirmed.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1538-1543
• /
• 2016

Strabismus is a non-aligned state;the visual axis of each eye is not directed toward the same direction at the same time. Clinically, the degrees of strabismus are measured by prism cover test, corneal reflex test (Hirschberg test), prism reflex test (Krimsky prism test), But corneal reflex test and prism reflex test is a possibility that errors occur. we suggest a computer-aided diagnosis for strabismus. We made a mobile application to measure angles of strabismus. For 34 patients, we tested our application. The result of comparing between two methods, It showed a difference 7 Prism Diopter(PD). Our application gives strabismus angles just using a camera and a smart device. Therefore, it can reduce the cost and make the diagnosis of strabismus accurate.

• The Korean Journal of Emergency Medical Services
• /
• v.3 no.1
• /
• pp.20-32
• /
• 1999

The purpose of this retrospective research of 603 patients who were transferred to the emergency medical center of university hospital from 1 Jan, 1998 to 31 Jan, 1998 was making of basic data for emergency medical transfer system improvement countermeasure and the point at issue of overlapping reexamination ststus of patients transfered to emergency medical center of university hospital from 1,2 level hospital. The data analysis was done by SPSS, t-test, ANOVA, Pearson correlation. The results were as follows: 1. Male to female ratio was 1.7:1 and peak age group was patients over forties and under nine years of age(70.5%) 2. Traumatic patients were 17.8%, motor vehicle accident patients were 16.7% and Non-traumatic patients were 65.3%. Transferring hospital was divided into 2groups: primary hospital, secondary hospital. The majority was secondary hospital(73.3%). The result of symptom severity classification of patients transferred to 3rd emergency medical center was urgent patients 32.5%, emergency patients 33.58%, non-emergency patients 34.0% 3. Most highest score items amoung overlapping reexamination of patients transfered to emergency medical center of university hospital from 1,2 level hospital were CBC test, simple X-ray (0.93점), CBC test(0.97점), urin test(0.88점), chemistry test(0.94점), simple X-ray(0.98점), CT(0.42점), EKG(0.89점) amoung overlapping reexamination of motor vehicle accident patients were more higher reexamination score than traumatic patients and non-traumatic patients 4. CBC test(P<0.001), urin test(P<0.001), chemistry test(P<0.001), simple X-ray(P<0.001), CT(P<0.01), EKG(P<0.001) amoung overlapping reexamination of patients in 2 level hospital were more higher reexamination score than 1 level hospital patients 5. About symptom severity classification of patients transferred to 3rd emergency medical center, CBC test(P<0.001), urin test(P<0.001), chemistry test(P<0.001), simple X-ray(P<0.01), CT(P<0.001), EKG(P<0.001) amoung overlapping reexamination items in urgent patients were more higher reexamination score than other patients 6. Influencing variation for overlapping reexamination in hospital was CBC test(P<0.001), CT (P<0.001), MRI (P<0.05).

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.8
• /
• pp.4113-4116
• /
• 2016

Background: Acceptance and commitment therapy (ACT) increases the psychological flexibility of people afflicted with cancer, and consequently improves their adaptability. The present research was conducted with the aim of determining the effectiveness of ACT for people afflicted with cancer. Materials and Methods: The present research was of semi-pilot type with a pre-test and post-test plan for the proof group. The demographics of the community were composed of all the women with cancer who were under treatment in Tehran's Dehshpour therapeutic center in 2015. The sample was composed of 24 people who were selected as available and chosen randomly in two groups of test and proof. All the participants responded to Snyder questionnaire in two pre-test and post-test stages, and the test group participated in treatment sessions after conducting the pre-test. Results: After collecting the information, data analysis was conducted in two description and inferential levels. The test results of covariance analysis showed that the two groups' hope was meaningfully different. Hope in the test group, compared to the proof group, increased meaningfully. Conclusions: The results show that the ACT is effective in increasing hope of patients with cancer.

• Journal of Advanced Navigation Technology
• /
• v.23 no.4
• /
• pp.281-288
• /
• 2019

A Flight test is an important process that must be performed to maintain airworthiness in the aircraft lifecycle, including aircraft development and certification. Flight test can be conducted for the purpose of demonstrating or verifying compliance with the applicable standard. Results of the flight test air accident analysis confirm that it is caused by a combination of various factors as well as aircraft. The International Civil Aviation Organization recommends the establishment and implementation of a safety management system to prevent aircraft accidents, but it does not reflect the specificity of the flight test. As such, advanced countries are providing separate criteria to assist stakeholder in conducting flight test safety management. This study investigates and analyzes relevant regulations of advanced countries, in accordance with the construction of a national flight performance test site in Korea, and proposes government-level guidelines to help stakeholders develop their flight test operation manuals. The guidelines discuss topics such as organizational composition, safety and risk management, flight operation, personnel management, and administrative issues.

• Journal of Acupuncture Research
• /
• v.37 no.2
• /
• pp.110-117
• /
• 2020

Background: The aim of this pilot study was to assess the safety and dosing of scolopendrid pharmacopuncture (SPP). Methods: A total of 40 healthy Sprague-Dawley rats (males and 20 females 20) were selected following a 7-day inspection and acclimation period. SPP was administered via intramuscular injection, over a 2-week period using 3 doses including a high-dose [0.84 mg of scolopendrid per kg of body weight (BW)], a med-dose (0.42 mg/kg BW), and a low-dose (0.21 mg/kg BW). The control group was injected with sterile water into the muscles. Unusual changes caused by administration of the test substance were observed. Weight, feed intake, organ weight, and hematological examinations were compared among the groups. Using the SPSS statistical program, Levene's test was performed to evaluate the homogeneity of variances, and a one-way ANOVA test was subsequently performed to assess the significance between each test group. Results: During the experiment no animals died. Weight change, food consumption, organ weight, hematological test, and blood biochemical tests showed no significant differences in the treatment groups compared to controls. Conclusion: No toxicological changes related to the administration of test substances were observed. Therefore, the LD₅₀ (lethal-dose that kills 50%) of scolopendrid pharmacoupuncture in rats was greater than 0.84 mg/kg.

• Analytical Science and Technology
• /
• v.25 no.6
• /
• pp.410-415
• /
• 2012

In this study, a fundamental study was conducted to establish the method for quantitative analysis and pretreatment of triclosan, one of the chemicals to be used as bactericides, detergents, and sterilizers. The extraction efficiency of triclosan was the highest when it was extracted by soxhlet apparatus with n-hexane, and it showed a satisfactory result when the samples were analyzed with both GC/ECD and GC/MS. To evaluate the reproductivity of the results, each 30 reference samples made with paper filter and cotton wool was prepared in this study. From the results with high extraction effectiveness, low analysis deviation, and good statistical analysis data, the method for the extraction and analysis for triclosan were resonable for the paper and textile samples applied in this study.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.1
• /
• pp.74-77
• /
• 2008

The radiopharmaceuticals are routinely injected to blood vessel for acquiring PET image. For this reason, It is imperative that they undergo strict quality control measures. Especially, Sterility test is more important than any other quality control procedures. According to the FDA guideline, It requires filter integrity test used in the processing of sterile solutions. Among several methods, we can decide to use bubble point test. We usually use vented GS-filters (Millipore co., USA) which are sterilizinggrade (0.22 um pore size) and are placed upper site on product vial. After the synthesis of $^{18}F$-FDG, solutions wet the membrane in filter and then go into the product vial. By all synthesis steps have finished, we can observe the presence of the bubbles in the product vial. Since we have started this study, we have never found any bubbles in the product vial. Because the maximum pressure intensity of the filter which has set by manufacturer is up to 5 bars, but helium gas pressure is up to 1 bar in our module system. So, we can make 5 bars pressure using helium gas bombe and increase pressure up to 5 bars step by step. However, it does not happen to anything in vial.

• Journal of Oriental Neuropsychiatry
• /
• v.24 no.2
• /
• pp.145-154
• /
• 2013

Objectives : The purpose of this study is to examine the effects of treatment with scalp acupunctures for children with learning disorders. Methods : For this study, we evaluated Korea standard progressive matrices test (K-SPM) on 24 children with learning disorders who visited Korean medical center neuropsychiatry outpatient clinic from July 2012 to January 2013. Scalp acupuncture, cognitive enhancement therapy and speech-language therapy were applied. All children were treated 2 times a week for 4 months and we compared K-SPM test scores before treatment and 30 times after the treatment. Results : 1) After the treatment, K-SPM test scores have increased significantly (p<0.05) and the number of children in grade 5 (<5%) have decreased from 14 to 6. 2) Comparing K-SPM test scores between two groups: one with medical history and the other without medical history, the scores in both groups have increased significantly (p<0.05). 3) We also divided the children into two groups according to age: under the age of 13 and over the age of 13, and compared K-SPM test scores. Although the scores in both groups have increased respectively, it is the scores of the former group (under the age of 13) that have increased significantly (p<0.05). Conclusions : The treatments with scalp acupunctures were shown to be an effective intervention when improving K-SPM test scores of children with learning disorders.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.26 no.1
• /
• pp.13-22
• /
• 2022

This study proposes a low-cycle fatigue life derived from measurement points on pipe elbows, which are components that are vulnerable to seismic load in the interface piping systems of nuclear power plants that use seismic isolation systems. In order to quantitatively define limit states regarding leakage, i.e., actual failure caused by low-cycle fatigue, in-plane cyclic loading tests were performed using a sine wave of constant amplitude. The test specimens consisted of SCH40 6-inch carbon steel pipe elbows and straight pipes, and an image processing method was used to measure the nonlinear behavior of the test specimens. The leakage lines caused by low-cycle fatigue and the low-cycle fatigue curves were compared and analyzed using the relationship between the relative deformation angles, which were measured based on each of the measurement points on the straight pipe, and the moment, which was measured at the center of the pipe elbow. Damage indices based on the combination of ductility and dissipation energy at each measurement point were used to quantitatively express the time at which leakage occurs due to through-wall cracking in the pipe elbow.