• 한국항공운항학회지
• /
• 제20권3호
• /
• pp.1-7
• /
• 2012

한국항공우주연구원은 향후 고흥항공센터가 종합적 비행시험센터로서의 역할을 수행할 수 있는 능력을 확보하고자 중장기발전계획수립을 위한 기획연구를 수행하였다. 고흥항공센터가 비행장으로 확장되기 위해서는 필요한 법적 요건을 갖추어야 한다. 즉, 활주로를 비롯한 장비/설비, 장애물제한표면/거리, 비행공역, 제한고도 등 많은 법적 요구사항을 항공법이 규정하고 있다. 본 연구에서는 이들 요구사항 중 비행장 설치에 비중이 높은 장애물 제한표면에 대하여 기존 활주로의 확장과 신규 대형 활주로 구축을 전제로 한 조사결과를 중점적으로 제시하고자 한다.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1470-1476
• /
• 2019

The nuclear power plants in South Korea have been designed in accordance with the U.S. Regulatory Guide 1.60 (R.G 1.60) design spectrum of which the peak frequency range is 2-10 Hz. The characteristics of the earthquakes at the Korea nuclear power plant sites were observed to be closer to that of Central and Eastern United States (CEUS) than the R.G 1.60, which is a lower amplification in a low frequency range, and a higher amplification in a high frequency range. The possibility of failure for sensitive power plant components in the high frequency range has been considered and evaluated. In this study, in order to improve the reliability of nuclear plant and administrative control procedures, seismic tests of an emergency diesel generator (EDG) were conducted using a shaking table under both high and low frequency ranges. From the tests, oil/lubricant leaks from the bolt connections, the fuel filter and the fuel inlet were observed. Therefore, the check list of nuclear plant components after an earthquake should include bolt connections of EDG as well as anchor bolts.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.619-626
• /
• 2005

This work aims at studing the stress-strain-strength behavior of an CSG(cemented sand and gravel) materials. An analysis of the mechanical behavior of the CSG is performed from the interpretation of results by unconfined compression test, large triaxial compression test in which the influence of both the degree of cementation and age. For CSG, It was concluded that the characterristics of compression are direct measurment of the degree of cementation and age. In addition, hyperbolic model is adopted to express the relation between elastic moduli and cementation, age, confined stress in small strain. The results of the test show that clear correlation with each other

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권1호
• /
• pp.37-50
• /
• 2006

The accelerated life tests of the catalytic gas sensor were performed at three different gas concentration conditions. From the test data, the power-Weibull model was estimated and the acceleration factor between test condition 25%LEL(Lowe Explosive Limit) and use condition 5%LEL was about 3 according to this acceleration model. Using this acceleration factor, life test specification for qualifying that B10 lifetime of the catalytic gas sensor meets the goal lifetime (5 years) was designed.

• 비파괴검사학회지
• /
• 제12권3호
• /
• pp.33-39
• /
• 1992

This paper presents a summary of the immersion ultrasonic test to analyze the quality of diffusion bonding parts. The most important property of diffusion bonding parts is bonding strength, and that can be obtained by shear test. By comparing among data obtained by ultrasonic test(C-Scan) and those by shear test (bonding strength), these data are shown to be in good relation. Therefore ultrasonic C-Scan test result can be used successfully in quantitative quality control for diffusion bonded parts.

• Journal of Welding and Joining
• /
• 제31권3호
• /
• pp.4-10
• /
• 2013

In electronic industry, the trend of future electronics will be flexible, bendable, wearable electronics. Until now, there is few study on bonding technology and reliability of bonding joint between chip with micro solder bump and flexible substrate. In this study, we investigated joint properties of Si chip with eutectic Sn-58Bi solder bump on Cu pillar bump bonded on flexible substrate finished with ENIG by flip chip process. After flip chip bonding, we observed microstructure of bump joint by SEM and then evaluated properties of bump joint by die shear test, thermal shock test, and bending test. After thermal shock test, we observed that crack initiated between $Cu_6Sn_5IMC$ and Sn-Bi solder and then propagated within Sn-Bi solder and/or interface between IMC and solder. On the other hands, We observed that fracture propated at interface between Ni3Sn4 IMC and solder and/or in solder matrix after bending test.

• 종양간호연구
• /
• 제12권4호
• /
• pp.305-313
• /
• 2012

Purpose: This study was done to clarify the effects of foot reflexology on peripheral neuropathy, symptom distress, anxiety and depression in cancer patients treated with oxaliplatin. Methods: A quasi-experimental design was employed. Changes in the variables were evaluated to test the effects of foot reflexology. Participants were cancer patients treated with oxaliplatin (experimental group 14 and control group 17). Peripheral neuropathy, symptom distress, anxiety and depression were measured before and after reflexology. Data were collected from October, 2010 to April, 2011. ${\chi}^2$-test, Fisher's exact test, t-test, Wilcoxon signed rank test and the Mann-Whitney U test were used to analyze the data. Results: The experimental group who received foot reflexology experienced less peripheral neuropathy and symptom distress than the control group. There was no difference in anxiety and depression between the experimental and control group. Conclusion: The foot reflexology program adopted in this study was found to be an effective method to reduce peripheral neuropathy and symptom distress. We recommend foot reflexology for patients with chemotherapy induced peripheral neuropathy.

• 항공우주기술
• /
• 제12권1호
• /
• pp.46-53
• /
• 2013

일반적으로 전자파 환경시험은 외부 전자기 환경의 영향을 배제하기 위하여 전자파 차폐룸에서 시험을 수행하지만, 시험체의 크기가 너무 크거나, 배기가스를 방출하는 등의 제약이 있을 경우 전자파 차폐룸에서 시험이 어려울 수 있으며, 야외 시험장을 이용할 수 밖에 없다. 야외 시험장은 측정 결과에 영향을 미칠 수 있는 전파 반사체, 전파 잡음 등이 시험장 내에 존재하지 않는 것이 이상적이지만 IT, 무선 통신 산업이 발달됨에 따라 기존의 야외 시험장은 수많은 생활전자파노이즈에 오염되어 있는 실정이다. 고흥 항공센터의 경우 도심과 떨어져 있고, 주변이 농경지로 둘러싸여 있어 전자파환경이 청정할 것으로 예상되며, 따라서 대형시험체의 전계강도를 측정할 수 있는 야외 시험장으로 활용이 가능할 수 있다. 이를 확인하기 위해 고흥 항공센터의 전자파환경을 측정하였으며, 30 MHz 이상의 주파수대역에서는 라디오, TV, 핸드폰 등 소스가 분명한 주파수를 제외하고는 대체적으로 깨끗한 결과를 보였으며 야외 시험장으로 좋은 역할을 할 수 있음을 확인하였다.

• 서비스연구
• /
• 제5권2호
• /
• pp.161-176
• /
• 2015

지난 수년 동안 응시자 수가 정체상태인 콜센터컬리지의 고객센터 매니저 및 예비 매니저 자격인증은 보급 확대를 위한 업그레이드가 절실한 시기라 할 수 있다. 본 연구는 고객센터 종사자들의 역량 확인 및 강화를 위한 인증 사업의 활성화 방안을 모색하는 데 있다. 인증 사업은 PBT(Paper-based Test)라는 한계로 인해 성장이 정체되고 있어, 그 타개책으로 IBT(Internet-based Test)모듈로 변경하여 국내외 시장에 서비스하는 사업 모델을 제시하고자 한다. 이를 위해 국내외 고객센터 산업동향 연구, 테스트서비스 성공사례 분석, 온라인 테스트 서비스 모델 및 제공방안 수립, 국내외 시장분석을 통한 중장기 전략을 제시하였다. 아울러 정보기술 융합을 통한 시장 경쟁력 확보, 인증 절차의 편의성 제고, 지식서비스 상품의 보급 확대와 함께 지식서비스 상품 수출의 선도적 지위를 선점하기 위한 방향을 제시하였다. 향후 연구에서는 서비스 운영, 수출 리스크에 대한 분석, 전략 중심의 연구를 통한 IT서비스 기반 지식서비스상품 수출 전략이 보완되어야 할 것이다.

• International Journal of Advanced Culture Technology
• /
• 제3권2호
• /
• pp.34-41
• /
• 2015

Bonding strength of a thermal sprayed coating is difficult to measure using a conventional pull-off test method. Scratch test is a potential alternative testing method. An adhesive and a cohesive bond strength of the coating can be measured by the pull-off test while the scratch test performed on the cross-section of the thermal sprayed coating can only demonstrate the cohesive bond strength of the coating. Nevertheless, it is still beneficial to perform the scratch testing on the cross-section of the coating for the sake of comparison thus providing an alternative to the pull-off test. The scratch test method can reduce testing time and cost in the long run due to a significant cost reduction in consumables and energy and time saving from the curing step of the glue used in the pull-off test. This research investigates the possibility of using the scratch test to measure the cohesive bond strength of Mo/NiCrBSi composite coating. The results from the pull-off test and the scratch test indicate that the cohesive bond strengths of the Mo composite coating show similar trend and that the cohesive bond strength are increased when increasing NiCrBSi content.