• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.163-170
• /
• 1999

Although the bulge forming technique is currently employed in commercial superplastic forming processes, the uniaxial tensile test is still the most commonly used method for the evaluation of the superplasticity of materials due to its simplicity in testing. However, the results obtained from the uniaxial tensile test can not be applied in analyzing the characteristics of the real parts formed in multi-axial stress state. In this paper, using the tensile test specimen obtained from the square cup manufactured by superplastic forming, tensile strength and elongation have been investigated according to the strain and cavity volume fraction. From the result of experiment, tensile strength and elongation are decreased according to the strain and cavity in Al-6%Cu-0.4%Zr alloy. On condition of uniaxial stress, cavity volume fraction is increased on linear according to the increasement of thickness strain. However, on condition of biaxial stress there are critical point( E t=1.5-1.6) that the slope, the ratio of cavity volume fraction and strain, have been changed. Therefore, cavity volume fraction is different with respect to stress condition, although the same strain.

• 한국산학기술학회논문지
• /
• 제21권8호
• /
• pp.187-194
• /
• 2020

효율적인 무기체계 연구개발을 위한 체계공학 과정에서는 개발단계 진행을 위한 의사결정 판단 자료로서 시험평가결과를 활용하고 있다. 무기체계는 운용 상 자연환경에 노출되는 빈도가 높기 때문에 개발 및 운용시험 평가 시 환경시험이 필수적으로 요구되어진다. 현재 우리 군에서는 MIL-STD-810과 MIL-HDBK-310 그리고 AECTP 200의 기후환경 기준을 기반으로 한국적 무기체계 운용온도를 도출하여 개발 및 운용시험 평가 시 활용하고 있다. 본 연구에서는 2014년 도출된 한국적 무기체계 운용온도 기준을 기반으로 하여 최근 대두되고 있는 지구온난화에 대한 영향성 등을 반영하여 저장물자 환경시험을 위한 한국적 온도기준 적합성 연구를 수행하였다. 분석대상은 1960년에서부터 2020년 3월까지 국내 101개 관측소에서 60년 간 매 정시마다 측정된 온도정보를 이용하였으며, 혹서기 8월과 혹한기 1월에 대한 백분율 발생빈도(0.5%, 1%, 5%, 10%)와 표준편차 발생빈도(3𝜎, 2𝜎, 1𝜎)를 도식화 및 수치화 하였다. 분석결과, 대한민국의 혹서기의 최대 극값은 41℃였으며, 0.5%의 발생빈도는 37.0℃로 식별되었다. 혹한기의 경우에는 최대 극값 -32.6℃, 0.5% 발생빈도 -21.1℃로 식별되었다. 기존의 육상 일반 무기체계 추천 온도 범위(-30 ~ 40℃)를 고려하였을 때, 대한민국 지역의 운용확률은 99.999%로 확인되었으며, 이는 최근의 이상이변에 따른 이상 기후 현상에도 불구하고 한국적 무기체계 운용온도 기준은 저장물자 환경시험에 적합함을 확인 할 수 있었다.

• 한국학교수학회논문집
• /
• 제10권3호
• /
• pp.369-384
• /
• 2007

본 연구는 성격과 수학불안이 무관하지 않다는 선행연구를 토대로 성격유형에 따라 수학불안 하위요인에서의 불안 정도를 비교하고 검증하였다. 연구대상은 충남 공주 및 경기도 안양의 고등학생 159명이었고 네 가지 선호지표(E-I, S-N, T-F, J-P), 기능과 기질, 16가지 성격유형으로 분류하고 각 유형별, 수학불안 하위요인별로 느끼는 수학불안 정도를 측정하였다. 그 결과 수학불안 하위요인인 학습동기에서는 E형이 교수방법에서는 N형의 학생들이 수학불안을 가장 많이 느끼고 있음을 보였다. 또한 교수방법에서 심리적 기질 및 기능에서 NT형의 학생들이 수학불안 정도가 높게 나옴으로서 성격유형에 따른 수학불안의 하위요소와의 관련성이 있음을 검증하였으며, 이를 통하여 수학불안 하위요소를 고려한 교수 학습을 제안할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.643-648
• /
• 1997

Concern for noise problems of a commercial aircraft in community and cabin is increasing due to the more restrictive regulation and customer requirements. This paper introduces to the work packages of the aircraft noise engineer for the development of a commercial aircraft. First of all, the noise engineer establish the design requirement and objectives(DR&O). Then the design and analysis are performed to satisfy with the DR&O during the conceptual and preliminary design phase. And the test and evaluation(T&E) are carried out to verify the analysis results and to acquire the type certification.

• 토지주택연구
• /
• 제11권4호
• /
• pp.93-98
• /
• 2020

This study examined the particulate removal performance of three different types of air filters inside a heat exchanger. Of interest was the ability of each filter type in reducing the transmission of outdoor particulate matter of PM10 from entering an apartment while the heat exchanger was in operation. The study tested one commonly used medium filter (E11 grade) and two HEPA filters (H13 grade) of different thicknesses. Two different concentrations of particulate matter were used in the experiment to address different ambient air quality conditions in Korea, 32.75 ㎍/㎥ and 67.26 ㎍/㎥. Study results indicated that under the particulate matter concentration of 32.75 ㎍/㎥, all three filters were capable of removing more than 95% of the fine dust. However at a particulate matter concentration of 67.26 ㎍/㎥, the medium E11 grade filter was only able to remove about 90% of the particulates whereas the HEPA H13 grade filters were able to remove 95% or more of the particulates. The thicker HEPA filter (40T) was also more effective in removing particulates than the thinner HEPA filter (20T) by about 1.6 to 3 percentage points. Based on the findings of this study, it is recommended that HEPA filters of 20T thickness or greater be used during the high air pollution seasons of winter and spring in Korea while medium filters can be used during the other seasons to reduce outdoor air pollution transmission indoors.

• 한국식품과학회지
• /
• 제40권1호
• /
• pp.101-105
• /
• 2008

시판되고 있는 선식 원료를 수거하여 최근 새로운 식중독균으로 보고되고 있는 Enterobacter sakazakii 분리 실험을 실시하였다. 그 결과 총 23종의 선식 원료 중 8개의 선식 원료에서 E.sakazakii로 추정되는 콜로니를 분리할 수 있었으며 API 20E kit를 이용하여 1차적으로 동정한 결과, 다시마 분말, 멸치 분말, 현미 분말, 청국장 분말 및 멥쌀 분말에서 E. sakazakii를 분리할 수 있었다. 이후 3 종의 primer를 이용한 PCR을 실시하여 2차적으로 동정하였다. 또한, 분리된 균주에 대한 RAPD-PCR을 실시하여 최종적으로 8종의 분리균으로 molecular typing을 할 수 있었다.

• International Journal of Oral Biology
• /
• 제41권4호
• /
• pp.243-251
• /
• 2016

This study was undertaken to achieve a high bleaching efficacy with plasma, through longer application and reparative bleaching processes, by different shade evaluation methods. Extracted human teeth were divided into 6 groups (n=10). All teeth were treated in pairs. Low concentration of 15% carbamide peroxide (CP) was applied, with and without plasma, for 10, 20, and 30-min tooth bleaching, respectively. The bleaching procedure was repeated once daily for four days. The teeth were maintained in a moist environment provided by artificial saliva. The Vitapan Classical shade guide and Commission Internationale de L'Eclairage (CIELAB) color system were collectively used to measure the bleaching efficacy. Color evaluation was statistically analyzed using Student t-test and one-way analysis of variance (ANOVA) complemented by Tukey's test. Combining the plasma with 15% CP showed significantly greater color changes compared to bleaching without plasma (p<0.05). A high bleaching efficacy with plasma is proportional to the repetitive application and the treatment time. A 30-min application with plasma provided the best bleaching. Repetitive bleaching showed lower probability of color relapse of the bleached tooth. The color change by shade guide correlated with the changes in CIELAB color system. A value of 1 color change units (CCU) conversion factor for overall color change (${\Delta}E$) values comparisons was 3.724 values. The two measuring methods provide a more accurate correspondence of color change. The repetitive and longer application for tooth bleaching, combined with plasma, has a strong bleaching effect and produces whiter teeth.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.115-122
• /
• 2008

Ductility is important in the design of reinforced concrete structures. In seismic design of reinforced concrete members, it is necessary to allow for relatively large ductility so that the seismic energy is absorbed to avoid shear failure or significant degradation of strength even after yielding of reinforcing steels in the concrete member occurs. Therefore, prediction of the ductility should be as accurate as possible. The principal aim of this paper is to present the basic data for the ductility evaluation of reinforced high-strength concrete beams. Accordingly, 23 flexural tests were conducted on full-scale structural concrete beam specimens having concrete compressive strength of 40, 60, and 70MPa. The test results were then reviewed in terms of flexural capacity and ductility. The effect of concrete compressive strength, web reinforcement ratio, tension steel ratio, and shear span to beam depth ratio on ductility were investigated experimentally.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.43-48
• /
• 2000

In this study, a small punch creep(SP-Creep) test using miniaturized specimen$(10{\times}10{\times}0.5mm)$ has been described for the development of the newly semi-destructive creep test method for high temperature structural components such as headers and tubes of boiler turbine casino and rotor and reactor vessel. The SP-Creep testing technique has been applied to 2.25Cr-1Mo(STBA24) steel used widely as boiler tube material and the creep test temperature are varied at $550^{\circ}C{\sim}600^{\circ}C$. The overall deformations of SP-Creep curves are definitely depended with applied load and creep test temperature and show the creep behaviors of three steps like conventional uniaxial creep curves. The steady state creep rate${\delta}_{ss}$ of SP-Creep curve for miniaturized specimen increases with increasing creep temperature, but the exponential value with creep loading is decreased. The activation energy$(Q_{spc})$ during SP-Creep deformation with various test temperatures shows 605.7kJ/mol that is g.eater than 467.4kJ/mol reported in uniaxial creep test. This may be caused by the difference of stress states during creep deformation In two creep test. But from the experimental results, e.g. SP-Creep curve behaviors, the steady state creep rate${\delta}_{ss}$ with creep temperature, and the exponential value(n) with creep loading, it can be summarized that the SP-Creep test may be a useful test method to evaluate the creep properties of the heat resisting material.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4447-4464
• /
• 2023

This paper focuses on the development of a new computational model of the CNESTEN's TRIGA Mark II research reactor using the 3D continuous energy Monte-Carlo code TRIPOLI-4 (T4). This new model was developed to assess neutronic simulations and determine quantities of interest such as kinetic parameters of the reactor, control rods worth, power peaking factors and neutron flux distributions. This model is also a key tool used to accurately design new experiments in the TRIGA reactor, to analyze these experiments and to carry out sensitivity and uncertainty studies. The geometry and materials data, as part of the MCNP reference model, were used to build the T4 model. In this regard, the differences between the two models are mainly due to mathematical approaches of both codes. Indeed, the study presented in this article is divided into two parts: the first part deals with the development and the validation of the T4 model. The results obtained with the T4 model were compared to the existing MCNP reference model and to the experimental results from the Final Safety Analysis Report (FSAR). Different core configurations were investigated via simulations to test the computational model reliability in predicting the physical parameters of the reactor. As a fairly good agreement among the results was deduced, it seems reasonable to assume that the T4 model can accurately reproduce the MCNP calculated values. The second part of this study is devoted to the sensitivity and uncertainty (S/U) studies that were carried out to quantify the nuclear data uncertainty in the multiplication factor k_eff. For that purpose, the T4 model was used to calculate the sensitivity profiles of the k_eff to the nuclear data. The integrated-sensitivities were compared to the results obtained from the previous works that were carried out with MCNP and SCALE-6.2 simulation tools and differences of less than 5% were obtained for most of these quantities except for the C-graphite sensitivities. Moreover, the nuclear data uncertainties in the k_eff were derived using the COMAC-V2.1 covariance matrices library and the calculated sensitivities. The results have shown that the total nuclear data uncertainty in the k_eff is around 585 pcm using the COMAC-V2.1. This study also demonstrates that the contribution of zirconium isotopes to the nuclear data uncertainty in the k_eff is not negligible and should be taken into account when performing S/U analysis.