• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.99-103
• /
• 2002

IEC 61800 is an international standard on adjustable speed electrical power drive systems, which consists of three parts. IEC 61800-1 and IEC 61800-2 apply to DC power drive systems and AC power drive systems, respectively, which include power conversion, control equipment, and also a motor or motors. IEC 61800-3 specifies EMC ( Electro Magnetic Compatibility ) requirements for adjustable speed AC or DC motor drives connected to main supplies up to AC 1,000 volts. This paper studies the standards related to EMC and the text summary of international standard IEC 61800-3 which is an EMC product standard including specific test methods.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.159-162
• /
• 2008

A standard fire extinguishing tester, with which we could conduct the fire extinguishing ability rating of a water-based fire extinguishing agent such as water and loaded stream, has been developed in this work. It could help us enhancing the efficiency and reliability of the fire extinguishing test of loaded streams, and at last increasing the productivity of fire protection related firms. Furthermore, our country could take the lead in making a new standard for the fire extinguishing test of loaded streams. As a result, it is expected that loaded streams could be improved by using it. In addition the standard fire extinguishing tester could be made moderately in our industry, and supplied at home and worldwide.

• 약학회지
• /
• 제47권5호
• /
• pp.261-265
• /
• 2003

Near-infrared (NIR) system was used to determine rapidly and simply indomethacin in buffer solution for a dissolution test of tablets and capsules. Indomethacin standards were prepared ranging from 10 to 50 ppm using the mixture of phosphate buffer (pH 7.2) and water (1 : 4). The near-infrared (NIR) transmittance spectra of indomethacin standard solutions were collected by using a quartz cell in 1 mm and 2 mm pathlength. Partial least square regression (PLSR) was explored to develop calibration models over the spectral range 1100∼1700 nm. The model using 1 mm quartz cell was better than that using 2 mm quartz cell. The PLSR models developed gave standard error of prediction (SEP) of 0.858 ppm. In order to validate the developed calibration model, routine analysis was performed using another standard solutions. The NIR routine analysis showed good correlation with actual values. Standard error of prediction (SEP) is 1.414 ppm for 7 indomethacin samples in routine analysis and its error was permeable in the regulation of Korean Pharmacopoeia (VII). These results show the potential use of the real time monitoring for indomethacin during a dissolution test.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.35-39
• /
• 2010

The IT project for power plants initiated domestically in 2005 necessitates the power equipment facility and the controllers for those to be sufficiently adaptable for automation system for power substations. This implies that the power plants using power equipments must be developed to satisfy the IEC61850 standards. The IEC61850 communication standards that all power equipment and facility and controllers installed in automation system for power substations must follow has had its Parts 3 and Part 4 established as international standard in January 2002 and Part 10 in May 2005, the last to become international standard. Hence all separate parts of the original IEC61850 standard came to be established as international standards. As a consequence, after 2005, in most power substations around the world the IEC61850 standard is being applied and the prominent makers are geared towards manufacturing products to the IEC61850 standard. The IEC61850 is being recognized as an essential standard that must be applied to not only power substations but for automation of power systems and communication systems. In this research, the Gateway device that connects current SCADA system and IEC61580 based system has been domesticated with Korea‘s own technology and extensive testing was carried out in order to obtain confidence in its performance.

• 전기학회논문지P
• /
• 제57권1호
• /
• pp.6-13
• /
• 2008

National standard system for calibrating current transformer(CT) up to primary current of 20,000A have been established. The system consists of 20,000 A AC high current source, CT comparator, standard CT, CT under test and CT burden. An AC high current is applied tn the primary windings of both the standard CT and the CT under test, and then the CT comparator measures the ratio error and the phase displacement by comparing the secondary currents of the two transformers. As a validity check for 20,000 A CT calibration system, the comparison with the two national standard institutes(NMIs) has been performed using same CTs. The comparison results of the CTs are consistent with those measured at two NMIs within 0.004 % for ratio error and 0.1 min for phase displacement in the primary current ranges of Ip = 10 - 20,000 A with a secondary current of Is = 5 A.

• 한국학교수학회논문집
• /
• 제16권3호
• /
• pp.479-498
• /
• 2013

교육격차를 완화하여 국가 경쟁력을 높이고 평생학습 사회에서 개인의 장래 성장과 발전의 기틀을 마련하기 위하여 모든 학생들의 기초학력을 보장하려는 움직임이 다양하게 전개되고 있다. 본 논문에서는 학생들의 기초학력을 결정짓는 성취수준 설정의 의미와 방법을 알아보고, 2013년 초등학교 3학년을 대상으로 실시되는 기초학력 진단평가의 '기초수학' 과목에 대한 성취수준과 분할점수 설정 방법을 살펴보고자 한다. 학교현장에서 활용할 수 있는 성취수준 설정 방법과 적용 사례의 제시는 준거참조평가에서 성취수준 설정 시 고려해야 하는 것에 대한 시사점을 제공할 수 있으리라 기대된다.

• 한국농공학회논문집
• /
• 제62권1호
• /
• pp.117-126
• /
• 2020

The area of facility horticulture in Korea is increasing rapidly, the single-span pipe house which uses galvanized steel pipe as the main rafters occupies 78.7% of the facility area. Lightweight structures such as the single-span pipe house are vulnerable to meteorological disasters such as strong winds, economic losses of the state, local governments and farmers are continuing as construction does not meet the design standards. In order to minimize economic losses in the horticultural specialty facilities sector, the Rural Development Administration has been operating the horticultural disaster resilient standard for horticultural specialty facilities since April 2007. The only standard for the pipe connector is the disaster resilient standard, there is no standard for the uplift capacity of the house pipe foundation and the research on it is also insufficient. The purpose of this study is to investigate the characteristics of uplift capacity according to the foundation type, compaction ratio and embedded depth through soil box test. The results of the maximum uplift capacity according to the type, compaction ratio and embedded depth can be used as the basic data for the basic design of the pipe house conforming to the disaster resilient standard. Due to the limitation of soil box test, it may be different from the behavior of pipe house installed on site. In the future, the field test and the actual pipe house should be made and supplemented by comparing this result with the field test values.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.15-19
• /
• 2001

Electronic navigation system onboard have have been developed with recent technology based on new concept such as electronic chart date. The most valuable system of revolution in electronic navigation equipment is ECDIS, which have been developed in order to reduce work load of mariner and give an integrated information by simple means, especially to improve the safety of ship's navigation. In order to be sure the function of ECDIS is satisfied, The international standard have regulated the performance in the standard, so ECDIS should be type approved by the marine equipment authority of each government. There are three basic documents, IEC61174, IEC61162, IEC60945 issued by IMO(International Maritime Organization) which should be used for type approval system of each authority. IEC 61174 include the method of test and required results for operational and functional performance of test equipment. IEC61162 is for sensor interface and IEC60945 is related to the test of environmental condition for general marine radiocommunication equipment. In this paper, we investigate international standard in detail and current approval system of general marine equipment. After that, we present the possible structure of type approval of ECDIS and important considerations of approval system such that ECDIS should be tested as one system not be separated between S/W and H/W.

• 한국정밀공학회지
• /
• 제27권11호
• /
• pp.72-77
• /
• 2010

The fatigue characteristic of a material or a structure is derived from fatigue tests of standard specimens. However, many test results of standard specimens are very different from those of real structures. One reason for this difference is the constraint effects according to the geometrical difference. Therefore, to calculate more accurate fatigue life, the constraint effect must be considered by comparing test results of standard specimens with those of real structures. In this study, a blade of an air-conditioner was evaluated by both the test and the analysis. The results showed that a standard specimen is conservative, compared with a structure specimen. And fatigue life of an air-conditioner's blade was predicted from those.

• 열처리공학회지
• /
• 제13권1호
• /
• pp.10-15
• /
• 2000

Evaluation of long term stability of the Brinell standard hardness tester was carried out to secure its application as a national standard in Brinell hardness. Accuracy and repeatability in load application were tested through evaluating errors in hardness measurement of certified reference blocks. All of those requirements in KS as well as ISO specifications were satisfied by this standard hardness tester. In addition to this, long term stability test of automatic indentation measurement system was carried out. The scattering range was almost the same with its error range. To figure out an optimum test condition for better repeatability and long term stability, the effect of load variation, load application speed and time have been studied using orthogonal array experimental plan. It was found that the best combination is $30{\mu}m/s$ of load application speed and 25 seconds of load application time.