• ETRI Journal
• /
• v.33 no.3
• /
• pp.470-473
• /
• 2011

In this letter, we propose blackbox and scenario-based testing of multiplayer online games as well as simple load testing. Game testing is done from outside the source code, and the access to the source code is not required to testers because the game logic is described with a game description language and virtual game map. Instead of using a subset of the main game client for the test client, only game packet protocols and the sequence of packets are analyzed for new game testing. In addition, complex and various scenarios can be tested through combining defined actions. Scenario-based testing helps testers mimic real testing environments instead of doing simple load testing and improves the productivity of game testing.

• Journal of Industrial Technology
• /
• v.32 no.A
• /
• pp.79-86
• /
• 2012

In this paper, centrifuge model tests and numerical analysis on the breakwater structure were performed to investigate the stability and behavior of breakwater in field. In centrifuge model tests, construction sequence of breakwater structure such as preparation of weathered rock and sand deposit, construction of D.C.M, rubble mound with crushed stones and installment of breakwater structure was reconstructed like field condition and the behavior of ground settlement and breakwater displacement during stage of construction was observed during tests. For the final stage of simulating the horizontal movement of breakwater due to wave force, horizontal load was applied by horizontal loading apparatus being specially designed so that horizontal displacement of structure could be observed. Numerical analysis were also carried out and its results were compared with test results to assess the property of centrifuge model tests with respect to the behavior of structure as well as ground.

• Nuclear Engineering and Technology
• /
• v.36 no.6
• /
• pp.497-511
• /
• 2004

A PSV (pressurizer safety valve) popping test carried out in the early phases of a refueling outage may trigger a test-induced LOCA(loss of coolant accident) if a PSV fails to fully close and is stuck in a partially open position. According to a KSNP (Korea standard nuclear power plant) low power and shutdown PSA (probabilistic safety assessment), the failure of a high pressure safety injection (HPSI) accompanied by the failure of a PSV to fully close was identified as a dominant accident sequence with a significant impact on low power and shutdown risks (LPSR). In this study, we aim to investigate and verify a new means for mitigating this type of accident using a thermal-hydraulic analysis. In particular, we explore the applicability of an aggressive cool-down combined with operator actions. The results of the various sensitivity studies performed there will help reduce LPSR and improve Refueling outage safety.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.54-55
• /
• 2013

Recently, The economic growth has increased carbon dioxide emissions. so, It is caused by social problem to environmental damage and human health due to global warming. Accordingly, The method solution is to the amount of cement and to use industrial by-product such as Blast furnace slag, Fly Ash, and Red-mud. Thus, The purpose of this study is to analyze the physical property of concrete with red-mud. So, this study carries out the basic performance test of concrete such as, air content, slump, and compressive strength. In this work test is conducted according to sequence of materials using concrete twin mixer.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.3
• /
• pp.741-750
• /
• 1998

본 논문에서는 형식 기법을 이용하여 차세대 지능망 응용 프로토콜(INAP:Intelligent Network Application Protocool)적합성 시험 스위트를 생성하는 방법 및 IUT(Implenentation Under Test)시뮬레이터를 구축하여 시험을 수행함으로써 시험 스위트를 검증하는 방법에 관해 기술한다. SDL(Specification and Description Language)과 같은 형식 언어를 사용하여 INAP FSM(Finite State Machine)을 모델링하고 MSC(Message Sequence Chart)로 시험 목적을 기술한다. 기술된 FSM모델과 시험 목적을 검증하기 위해 모의 시험을 거치며, 검증이 완료된 후 시험 스위트로 변환이 된다. 형식 기법을 이용하여 INAP규격을 정확하게 기술할 수 있을 뿐 아니라 시험 스위트를 자동으로 생성함으로써 시간과 비용을 절감할 수 있다. 또한 생성된 시험 스위트를 시험기에 탑재하여 IUT시뮬레이터를 대상으로 시험을 수행함으로써 시험 스위트를 검증할 수 있는 방안을 제시하였다.

• Transactions of Materials Processing
• /
• v.10 no.1
• /
• pp.67-74
• /
• 2001

The cold forging process to produce a long-neck flange is investigated by using model material test. The two stage process with optimum design condition is examined using plasticine, which is suitable to model steel at room temperature. The similarity theory is employed to estimate the forging load of each sequence by strict application of similarity condition between steel(AISI 1015) and plasticine material The model test results are compared with the simulation results and shows good agreement. The proper forging process with least forming energy can be resulted in $25^{\circ}$ of extrusion semi-die angle.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.8 no.3
• /
• pp.105-114
• /
• 1998

Maurer가 제안한 유니버설 통계적 검정을 소개하고 검정에 사용된 통계량의 의미를 분석한다. 기존 검정법을 포괄하는 이 검정법은 보다 넓은 의미의 통계적 결점들을 탐지해낼 수 있다. 또한, 검정에 사용되는 통계량은 엔트로피와 밀접한 연관이 있으며 암호학적 응용에서 시스템의 안전성에 영향을 키치는 요소들을 탐지해 낸다. 이러한 특징과 함께 기존 검정법 보다 상당히 긴 표본 수열을 필요로 한다는 사실이 유니버설 검정의 단점으로 지적되어 왔다. 그러나 본 논문에서는 빈도(freequency) 검정법과의 비교를 통해서 미세한 편의(bias)를 탐지해내기 위한 도구로서는 유니버설 검정이 오히려 더 효율적이라는 사실을 보였다.

• Journal of information and communication convergence engineering
• /
• v.21 no.4
• /
• pp.337-345
• /
• 2023

In this study, we formulated a method that evaluates Taekwondo Poomsae performance using a series of choreographed training movements. Despite recent achievements in 3D human pose estimation (HPE) performance, the analysis of human actions remains challenging. In particular, Taekwondo Poomsae action analysis is challenging owing to the absence of time synchronization data and necessity to compare postures, rather than directly relying on joint locations owing to differences in human shapes. To address these challenges, we first decomposed human joint representation into joint rotation (posture) and limb length (body shape), then synchronized a comparison between test and reference pose sequences using DTW (dynamic time warping), and finally compared pose angles for each joint. Experimental results demonstrate that our method successfully synchronizes test action sequences with the reference sequence and reflects a considerable gap in performance between practitioners and professionals. Thus, our method can detect incorrect poses and help practitioners improve accuracy, balance, and speed of movement.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.3
• /
• pp.775-787
• /
• 1996

An optimization procedure is proposed for the design of cylindrically laminated composite shell having midplane symmetry and subjected to axial force, torsion and internal pressure. Tsai-Wu and Tsai-Hill failure criteria are taken as objective functions. The stacking sequence represents the design variable. The optimal design formulation based on state space method is adopted and solution proccedure is described with the emphasis on the method of calculations of the design sensitivities. A gradient projection algorithm is employed for the optimization process. Numerical results are presented for the several test problems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.279-282
• /
• 1996

The authors have already proposed a method for grouping of inputs of a logical circuit under test (LCUT) by use of M-sequence correlation. We call this method as input grouping (IG) method. In this paper, the authors propose a new method to estimate the faulty part in the circuit by use of IG when some information on the candidate of faulty part can be obtained beforehand. The relationship between IG and fault probabilities of a LCUT, and undetected fault ratios are investigated for various cases. Especially the investigation was made in case where the IG was calculated by use of n correlation functions (I $G_{inp}$). From the theoretical study and simulation results it is shown that the estimation error ratio of fault probabilities and undetected fault ratio of LCUT are sufficiently small even when only a part of correlation functions are used. It is shown that the number of correlation functions which are to be memorized to calculate IG can be considerably reducible from 2$^{n}$ - 1 to n by use of I $G_{inp}$. So this method would be very useful for a fault diagnosis of actual logic circuit.uit.