• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.459-467
• /
• 2016

최근, 도로를 따라 지하 5~7m의 저심도에 설치되는 저심도 도시철도시스템의 경제성을 확보하기 위해, 신개념의 모듈식 개착 시공법을 개발 중에 있다. 본 연구에서는 상부 슬래브간의 연결부에 대한 구조성능 검증을 위해 루프이음을 가진 프리캐스트 철근콘크리트 부재들의 4점 재하 실험을 수행하였다. 전체 11개의 실험체가 제작되었으며 단면형상, 이음부 형상, 이음길이, 횡방향 보강철근을 변수로 이음이 없는 전단면 및 반단면 실험체와 비교하였다. 실험결과, 루프이음 실험체는 항복하중과 최대하중시 변위량 차이가 컸으며 이는 항복이후 접합부에서 발생한 균열이 확장됨에 따라 강성저하로 변위량이 급격히 증가한 것으로 판단된다. 또한 200mm의 루프이음을 가진 반단면 실험체의 경우, 이음이 없는 기준 실험체에 상당하는 휨성능을 확보하며 200mm 초과시 휨성능 향상의 정체기를 보였다.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.186-194
• /
• 2001

To meet the challenge of testing increasingly complex automotive control systems, the real-time hardware-in-the-loop(HIL) simulation technology has been developed. In this paper, a strategy for evaluation of semiactive suspension systems using real-time HIL simulation is presented. A multibody vehicle model is adopted to simulate vehicle dynamic motions accurately. Accuracy of the vehicle simulation results is compared to that of the real vehicle field test and proven to be very accurate. The controller and stepping motor to adjust semi-active damper stage are equipped as external hardwares and connected to the real-time computer which has vehicle dynamic model. Open and closed loop test methods are used to evaluate a controlled suspension system and the system's operations are verified it is found that the proposed evaluation methods can be used well for the verification of semi-active suspension systems.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.353-363
• /
• 2023

The STELLA-2 is a large-scale sodium thermal-hydraulic integral effect test facility and supports the development of PGSFR. The facility adopted Pump Simulation Loop System (PSLS) concept for the mechanical sodium pump in the reference reactor to control and to measure the primary sodium flow. Since the component (mechanical pump) is replaced by the loop, it is very important to evaluate the similarity between the pump and the loop. In this paper, to simulate the characteristic of the mechanical sodium pump, the pressure loss along the various options of the loop was evaluated and the comprehensive validity of each design options was analyzed. Using the similarity criteria based on the Richardson number and Euler number conservation, the PSLS design was finalized and the result was within the acceptable error range. Finally, the result of this study was used for construction of the overall facility, STELLA-2.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2505-2510
• /
• 2008

A nuclear fuel test loop (after below, FTL) is installed in IR1 of an irradiation hole in HANARO for testing neutron irradiation characteristics and thermo hydraulic characteristics of a fuel loaded in a light water power reactor or a heavy water power reactor. When HANARO is normally operated, the fuel loaded in the irradiation hole has a nuclear reaction heat generated by a neutron irradiation. To remove the generated heat and to maintain an operation condition of the test fuel, a main cooling water system (MCWS) is installed in the OPS of the FTL. This paper describes the cold function test results of the MCWS. It was confirmed through the test results that the system met the design requirements under a cold operation condition.

• 대한산업공학회지
• /
• 제25권2호
• /
• pp.282-289
• /
• 1999

To minimize a real world test of underwater guided vehicle, it is necessary to perform a test on ground by using closed loop test techniques. This paper describes implementation of HILS(Hardware In the Loop Simulation) system for ground test and test methodologies for performance evaluation of a guided weapon. HILS system uses a real time distributed computer and a real time processing technique. Ground test results of underwater vehicle are presented for moving and stationary targets by using HILS system.

• 한국전자파학회논문지
• /
• 제17권9호
• /
• pp.821-828
• /
• 2006

본 논문에서는 시험용 휴대폰의 내부에 위치한 루프 형태 접지판의 위치와 크기 변화에 따른 SAR(Specific Absorption Rate) 값의 변화를 검토하였다. 휴대폰의 rear case 안에 있는 루프 형태 접지판에 따른 SAR 값에 대한 전산 모의 실험을 수행하였으며 그 결과 루프 형태 접지판의 위치와 크기에 따라 SAR 값이 달라짐을 보였다. 검토된 루프 형태 접지판의 위치와 크기들 중 small size case-C의 경우가 8.70 %의 감소 효율을 보여 가장 좋은 성능을 보였다. 그리고 이 경우에 루프 형태 접지판에 가장 높은 유도 전계 분포를 보였다. 전산 모의 실험시 폴딩 각도는 $160^{\circ}$로 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.147-150
• /
• 1996

This paper describes controller design and implementation method for controlling the temperature distribution in a thermal stratified wind tunnel(TSWT) by using a neural network algorithm. It is impossible to derive a mathematical model of the relation between heat inputs and temperature outputs in the test section of the TSWT governed by a nonlinear turbulent flow. Thus inverse neural network models with a multi layer perceptron structure are used in a feedforward control loop and feedback control loop to generate an arbitrary temperature distribution in the test section of the TSWT.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 춘계학술발표회 논문집
• /
• pp.107-112
• /
• 1986

This paper presents one method to resolve the end-to-end digital connectivity through 2-wire subscriber loop. This system which consists of the subscriber`s device and the line termination device makes use of the advantages of time compressed multiplexing and modified DPSK. Experimental results show that the transmission range of the lab test covers 2km and that of the field test covers 1.5km.

• 한국통신학회논문지
• /
• 제25권3B호
• /
• pp.504-509
• /
• 2000

This paper presents a noble operation and maintenance system for the optical subscriber loops and its feasibility through several experiments. In this system, a broadband CW (Continuous Wave) light source I used as monitoring of testing signals. and a FGF(Fiber Grating Filter) of which reflective wavelength is independent, is inserted somewhere in each subscriber loop for the reflection of monitoring of testing signals. The propose of the system is quick decision. whether the loop is just fault or not. rather than detailed information of loop state. At present, most of operation and maintenance system for the optical subscriber loops adopts OTDR(optical time domain reflectometer) for testing function. the OTDR is useful for detailed test, but not adequate for simple test because of long testing time . And it is difficult to test PON network by using general OTDR that has a single-wavelength light source. Compared to using OTDR, the proposed system can afford to shorten testing time and to test PON network. Moreover, we can cut down the system cost by simplifying circuits of the optical light sources. Our results show that the proposed system operates well according to the purpose mentioned above.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.101-105
• /
• 2021

Encouragement of DER from Korean government with several policies boosts DER installation in power system. When the penetration of DER in the grid is getting high, loss of generation with break-away of DER by abnormal grid conditions should be considered, because loss of high generation causes abnormal low frequency and additional operations of protection system. Therefore, KEPCO where is Korean power utility is preparing improvement in regulations for DERs connected to the grid to support abnormal grid conditions such as low and high frequencies or voltages. This is called 'Ride Through' because the requirement is for DER to maintain grid connection during required periods when abnormal grid conditions occur. However, it is not easy to have a test for ride through capability in reality because emulation of abnormal grid conditions is not possible in real power system in operation. Also, it is not easy to have a study on grid effect when ride through capability fails with the same reason. PHILs (Power Hardware In the Loop System) makes it possible to analyze power system and hardware performance at once. Therefore, this paper introduces PHILs test methods and presents verification of ride through capability especially for low voltage grid conditions.