• 대한금속재료학회지
• /
• 제50권7호
• /
• pp.487-493
• /
• 2012

To analyze the factors on stretch-flangeability for 980 MPa-grade hot-rolled steels, two types of steels (Fe-Cr and Fe-Mo) were manufactured by hot-rolling. Manufactured steels at the low coiling temperature, such as 400 and $500^{\circ}C$, had poor stretch-flangeability due to un-uniformly distributed carbides and a large deviation of interphase hardness. However, when the coiling temperature was set at $650^{\circ}C$ with Fe-Cr steel, 998 MPa of ultimate tensile strength, 19% of total elongation and 65% of the hole expanding ratio were achieved by microstructural constituents of polygonal ferrite (PF) and granular ferrite (GF) dispersed with fine carbides (<50 nm). Therefore, the material to attain 980 MPa with superior formability was the Fe-Cr steel that was precipitation-hardened in polygonal ferrite and granular ferrite at the coiling temperature $650^{\circ}C$.

• 천문학회지
• /
• 제54권2호
• /
• pp.37-47
• /
• 2021

Reverberation mapping (RM) is an efficient method to investigate the physical sizes of the broad line region (BLR) and dusty torus in an active galactic nucleus (AGN). The Spectro-Photometer for the History of the Universe, Epoch of Reionization and Ices Explorer (SPHEREx) mission will provide multi-epoch spectroscopic data at optical and near-infrared wavelengths. These data can be used for RM experiments with bright AGNs. We present results of a feasibility test using SPHEREx data in the SPHEREx deep regions for torus RM measurements. We investigate the physical properties of bright AGNs in the SPHEREx deep field. Based on this information, we compute the efficiency of detecting torus time lags in simulated light curves. We demonstrate that, in combination with complementary optical data with a depth of ~ 20 mag in B-band, lags of ≤ 750 days for tori can be measured for more than ~ 200 bright AGNs. If high signal-to-noise ratio photometric data with a depth of ~ 21-22 mag are available, RM measurements are possible for up to ~ 900 objects. When complemented by well-designed early optical observations, SPHEREx can provide a unique dataset for studies of the physical properties of dusty tori in bright AGNs.

• 한국임상수의학회지
• /
• 제39권5호
• /
• pp.272-276
• /
• 2022

An 8 month old leopard gecko (Eublepharis macularius) with a large nodule was referred to our hospital. During the physical examination, the nodule had an unclear boundary from the top of the left eye to the front of the left ear and prevented the opening of the left eye. A hard, cheese-like, yellow, pus-filled nodule was observed. A cytological examination of a pus swab sample revealed pyogranulomatous inflammation with rod-shaped bacteria. Ofloxacin was chosen as the empirical topical antimicrobial drug for treatment. The swab samples were inoculated in trypticase soy agar with 5% sheep blood and incubated at 37℃ for 24 h. Gram-negative bacteria were identified via Gram staining, and the Kirby-Bauer antimicrobial susceptible disk diffusion test against 24 antibiotics according to protocol M100-Ed32 of CLSI showed that the fluoroquinolone group (ciprofloxacin and enrofloxacin) was susceptible to the isolated bacteria. Molecular identification based on 16S ribosomal RNA gene sequencing confirmed that the isolated bacteria had a 99.85% nucleotide similarity with Serratia surfactantfaciens (GenBank accession no. CP014948). After 1 week, the boundaries of the nodule became clear; thus, the abscess was physically removed by expanding the hole formed above the eye for drainage, and flushing was repeated. After another 1 week, new tissue restoration without scarring was observed. This is a rare case report of the successful management of a subcutaneous abscess and scar-free healing in a lizard.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권1호
• /
• pp.83-89
• /
• 2023

The Korea Augmentation Satellite System (KASS) system is a Satellite Based Augmentation System (SBAS) under development to provide APV-I SBAS service in the Republic of Korea. The KASS ground segment generates correction and integrity information for GPS measurements of KASS users using the accurate positions of KASS Reference Station (KRS) antenna phase centers. For this reason, the accuracy of KRS reference points through geodetic survey campaigns is one of the important factors for providing the KASS service in compliance with the required navigation performance. In order to obtain accurate positions, two geodetic survey campaigns were performed at several reference points, such as Mark, Center of Mast at Ground Level (CMGL), and Center of Hole in Top Plate (CHTP), of each KRS site using three different survey methods, the Virtual Reference Station (VRS), Flächen Korrektur Parameter (FKP), and raw data post-processing methods. By comparing and analyzing the results, the computed coordinates of the reference points were verified and Antenna Phase Center (APC) positions were calculated using KRS Antenna Reference Point (ARP) data, and the first KASS Site Acceptance Test (SAT#1) was performed successfully using the verified APC coordinates. After the first site survey activities, the KASS operators should maintain the coordinates with the required performance such that the overall KASS navigation performance commitment is guaranteed during the lifetime of 15 years. Therefore, the maintenance plan for the KRS antenna coordinates should be developed before the commissioning of KASS operation planned after 2023. Therefore, this paper presents a geodetic survey method selected for the maintenance activities and provides the rationale for using this method.

• Smart Structures and Systems
• /
• 제29권3호
• /
• pp.445-455
• /
• 2022

Steel anchor bolts are installed in concrete using a variety of methods. One of the most common methods of anchor bolt installation is using epoxy resin as an infill material injected into the drilled hole to act as a bonding material between the steel bolt and the surrounding concrete. Typical design standards assume uniform stress distribution along the length of the anchor bolt accompanied with single crack leading to pull-out failure. Experimental evidence has shown that the steel anchor bolts fail owing to the multiple failure patterns, hence these design assumptions are not realistic. In this regard, the presented research work details the analytical model that takes into consideration multiple micro cracks in the infill material induced via impact loading. The impact loading from the Schmidt hammer is used to evaluate the bond condition bond condition of anchor bolt and the epoxy material. The added advantage of the presented analytical model is that it is able to take into account the various type of end conditions of the anchor bolts such as bent or U-shaped anchors. Through sensitivity analysis the optimum stiffness and shear strength properties of the epoxy infill material is achieved, which have shown to achieve lower displacement coupled with reduced damage to the surrounding concrete. The accuracy of the presented model is confirmed by comparing the simulated deformational responses with the experimental evidence. From the comparison it was found that the model was successful in simulating the experimental results. The proposed model can be adopted by professionals interested in predicting and controlling the deformational response of anchor bolts.

• 지질공학
• /
• 제32권4호
• /
• pp.525-534
• /
• 2022

지반 내부에 설치된 시트파일(sheet pile)의 근입 심도 확인을 위해 두 종류의 탐사기법을 활용하여 조사를 수행하였다. 탄성파탐사 원리를 활용하여 지반을 통해 전달되는 P파의 이동 속도 및 3성분 운동방향 분석을 통해 근입 심도를 추정하였다. 또한 시추공내의 전극배열에 따른 겉보기 비저항을 측정하는 전기 검층의 원리를 활용하여 단극-단극(pole-pole) 방법과 단극-쌍극(pole-dipole) 방법으로 각각 분석하여 근입 심도를 추정하였다. 그 결과, P파 검층에서 근입 심도는 9.0 m (±1.5 m), 전기검층에서 근입 심도는 7.5 m로 확인되었다. 다양한 물질들이 지반 내부에 존재하는 현장의 특성 상 전기탐사의 노이즈가 적어 탐사에 적합한 것으로 판단된다.

• Composites Research
• /
• 제21권4호
• /
• pp.15-21
• /
• 2008

단일 탄소섬유에 부착된 반구형 미소본드 시험편을 제사하여 에폭시수지와 난소섬유사이의 계면전단강도를 평가하였다. 반구형 미소시험편의 경우, 드랍레트 미소접합시험편 및 역반구형 미소접합시험편과 비교하여 계면강도측정값들이 높은 회귀계수 및 삭은 편차를 보여주었다. 이는반구형 시험편의 메니스커스 부분이 다른 미소시험편보다 작으며 핀홀 부하장치의 선단과 접촉하고 있는 수지부분에서 응력집중이 감소했기 때인 것으로 사료된다. 이들 시험에 대한 유한요소해석결과, 반구형시험편에서는 수지/섬유의 계면부를 따라 전단응력분포가 응력모드의 전환이 없이 안정하였다. 또한 이들 계면강도 측정데이터는 미소 바이스의 선단과 핀홀 판의 선단과 같은 부하장치의 종류에 따라 달라졌음을 알았다.

• 대한토목학회논문집
• /
• 제29권4A호
• /
• pp.307-313
• /
• 2009

본 연구에서는 철도교의 세로보 절취부에 피로균열이 발생 하였을 때 이에 대한 적절한 보수 보강 방법을 연구하기 위하여 실제로 피로균열이 발생한 철도교를 연구대상으로 실물크기의 가로보-세로보 바닥틀 모형을 제작하고, 세로보의 절취부 및 균열부에 스톱 홀 보수, 덧댐판 보강, 연결판 보강, 브라켓 보강 등 보수 보강 방법을 적용하여 실내실험을 수행하였다. 그 결과 제일 효과적인 보강 방법으로는 세로보의 상부플랜지와 하부플랜지에 연결판과 브라켓을 설치하는 것이고, 균열 선단에 스톱 홀을 뚫는 방법은 보조적인 방법으로 사용할 수 있다는 결론을 얻었다. 그리고 균열 길이가 어느 정도 길 경우에는 복부판에 덧댐판을 설치할 필요가 있다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권5호
• /
• pp.401-408
• /
• 2023

Thyroid uptake measurements can be subject to measurement errors due to the scoping and positioning of the thyroid gland. To compensate for these limitations, the clinical utility of the thyroid simultaneous counting method as an alternative to thyroid uptake measurement was analyzed and evaluated experimentally through quantitative analysis of images acquired after thyroid scanning. Experimental data were obtained using a Gamma camera (GE infinia), a thyroid uptake system (KOROID 1), and a thyroid neck phantom. Based on the thyroid uptake rate of 1-5% according to the protocol of thyroid scan test (^99mTcO₄ - , 370 MBq) in normal results, ^99mTcO₄ - was set in the range of 3.7-18.5 MBq (Matrix: 256×256, Scan time: 1 min, collimator: pin hole, phantom-collimator distances: 7 cm). The acquired images were corrected for the attenuation of isotopes due to the set-up time and half-life by applying the Auto Region of interest (ROI) drawing system, and the significance of the experimental results was evaluated by Multiple linear regression analysis (SPSS, ver. 22, IBM). The thyroid uptake rate showed a significant correlation between the dose and the measured counts when using the thyroid uptake system equipment. Meanwhile, the quantitative analysis counts of phantom images using Gamma camera also showed a significant correlation. Thus confirmed that the correlation between these two experiments was statistically significant (P<0.05). The simultaneous counting protocol, which indirectly measures thyroid uptake from thyroid scans, is likely to be clinically relevant if complemented by additional studies with different variables in patients with thyroid disease.

• 터널과지하공간
• /
• 제34권1호
• /
• pp.71-87
• /
• 2024

고준위방사성폐기물 심층처분 시, 처분공 주변의 근계암반은 높은 지중응력과 재포화된 벤토나이트 완충재의 팽윤압, 방사성 원소 붕괴열의 영향을 받아 국부적으로 투수계수가 변화될 수 있다. 본 연구에서는 국내 유력한 처분 대상 부지 암종 중의 하나인 결정질 경암으로서의 화강암을 대상으로, 실제 처분 환경에서 예상되는 다양한 구속압과 온도 조건을 적용하여 투수계수 변화 특성을 실험적인 방법을 통하여 고찰하고자 하였다. KURT 화강암 시험편 하나당 3개 이상의 정수압 조건에서 투수시험을 수행하여 구속압이 증가함에 따라 투수계수가 지수적으로 감소하는 관계를 도출하였다. 예상 최대 온도로 설정한 90℃ 이하 수준에서는 온도에 의한 투수계수 변화가 무시 가능할 정도로 작음을 확인하였다. 추가로 초기투수계수가 초기공극률의 거듭제곱에 비례하는 상관관계를 도출함으로써, 특정 공극률을 지닌 화강암이 일정 구속압 하에 있을 때 가지는 투수계수 값을 유추할 수 있었다.