• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.613-617
• /
• 2001

The test items like as endurance, air leakage and oil endurance test is requested for reliability evaluation about O-ring which is a kind of core machinery accessories of semi-conduct manufacturing equipment. For verification of these, we design and manufactured a test system for endurance, air leakage and oil endurance of O-ring for semi-conduct manufacturing equipment, and also performed the test for two kinds of O-ring, as it were Viton and Kalretz. The characteristics of this test equipment consist in realization of the test conditions of semi-conduct manufacturing equipment and satisfying the test method. The test conditions are cut gas, vacuum grade, temperature and revolution numbers in the endurance test system, vacuum grade and temperature in the air leakage test system, temperature and time in the oil endurance test system. The separating test results for wearing which is an oil endurance test item, the wearing index of domestic produced Viton O-ring is higher than foreign product by 2%, wearing rate of Kalretz O-ring better than Viton O-ring by 17%, and particles existed in various place. The test result of air leakage which is measured through the RGA sensor used Helium, the vacuum grade was $10^-3$Torr. And the test result of oil endurance, the volume change rate was 7~15%. Hereafter, we intend to analysis the reliability test evaluation and to utilize for domestic manufacturing companies by establishing data base and developing reliability softwares.

• 한국산업정보학회논문지
• /
• 제25권4호
• /
• pp.17-27
• /
• 2020

본 논문에서는 무기체계 양산에 활용되는 자동시험장비 (Automatic Test Equipment: ATE)의 유효성 입증을 위한 검증 방안을 제안하였다. 검증되지 않은 시험장비의 시험 데이터는 신뢰성이 미흡하여 객관적인 자료로써 활용이 제한되므로 ATE를 활용한 시험대상품의 품질 수준을 확보하기 위해서 시험장비의 검증이 필수적이다. 제시된 방법을 통해 전술정보통신체계 ATE에 적용하여 검증 결과를 확인하고 유효성 입증 결과를 기술한다.

• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.74-80
• /
• 2020

Crawler-type hydraulic devices facilitate forward and backward driving of construction equipment by converting power into mechanical energy. The existing hydraulic device performance test process is time- and labor-intensive. This study aims to improve efficiency and productivity by automating the hydraulic device production performance test processes, which have been separately conducted so far. We also used SolidWorksⓇ, a 3D modeling program, and ANSYSⓇ, a structural analysis tool, for structural analysis and to verify the suitability of fixing pins required for connecting a hydraulic device to performance test equipment. Our results that employing an automated hydraulic device performance test process improves efficiency.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1858-1868
• /
• 2021

Resisting an accidental impact of large commercial aircrafts is an important aspect of advanced nuclear power plant (NPP) design. Especially after the 9·11 event, some regulations were enacted, which required the design of NPPs should consider the accidental impact of large commercial aircrafts. Normal working of equipment is important for stopping reactor under an impact when an NPP is in operation. However, there is a lack of reliable analysis and research on the impact test of nuclear prototype equipment. Therefore, in order to study the response of the equipment under high acceleration impact, a centrifugal pump is selected as the research object to perform the impact test. A horizontal half-sinusoidal pulse wave was applied to the working pump. The test results show that the horizontal response of the motor and flange is greater compared to other parts, as well as the vertical response of the coupling. The stress response of the pump body support and motor support is high, hence these parts should be considered in the design of the pump. Finally, combined with the damage and stress evaluation results of the pump under different amplitudes, the ultimate impact acceleration that the pump can withstand is given.

• 한국지반신소재학회논문집
• /
• 제13권4호
• /
• pp.119-131
• /
• 2014

본 연구에서는 광역 부지나 현장 접근성이 용이하지 않은 현장의 지반조사를 신속 정확하게 수행하기 위한 목적으로 해외에서 널리 사용되고 있는 동적 콘 관입시험기를 개선한 개량형 동적 콘 관입시험기를 개발하였다. 기존의 동적 콘 관입시험기의 장점인 휴대성, 간단한 시험방법 등은 그대로 반영하는 한편, 하부 로트의 결합 연장을 통하여 기존 시험기의 지반 관입심도 1m에서 6m까지 관입되도록 고안하였다. 또한, 해머(2+3+3kg), 콘(3type) 등의 조합으로 독일식/일본식 간이 동적 콘 관입시험기(Tsukuba, PWRI, SH type)와 동일한 제원으로 시험이 가능하며, 심도가 깊어짐에 따라 시험 결과에 영향을 미치는 수직도를 확보할 수 있도록 보조 장치를 적용시켰다. 이렇게 개발 제작한 개량형 동적 콘 관입시험기의 적용성을 평가하기 위하여 국내/외 현장의 다양한 지반에 대하여 시험을 수행하여 그 신뢰성을 확보하였다.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.91-96
• /
• 2014

Modern electronic circuits are becoming more vulnerable to damage by surges, and it is required to improve the impulse withstand voltage performance of electrical and electronic equipment. This paper presents the impulse withstand voltage performance of lighting equipment connected to power lines, and the impulse withstand voltage tests for fluorescent lamp, LED lamp and halogen lamp were carried out according to the reference standards under normal service conditions. To conduct performance tests against lightning surge, a combination wave ($1.2/50{\mu}s$ voltage - $8/20{\mu}s$ current) was employed. The test surge was applied between lines or between line and ground of the specimen to be measured. The test surge was applied synchronized at the peak value of the positive and negative AC voltage waves. As a consequence, some specimens satisfied the impulse withstand voltage test criteria, but lighting equipment such as 36W fluorescent lamps, 5W and 5.5W LED lamps and 50W halogen lamp were damaged at the test voltage levels between power lines. It is needed to improve the qualities of lighting equipment to satisfy EMC immunity requirements of equipment for general lighting purposes.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2010년도 춘계학술대회
• /
• pp.231-237
• /
• 2010

The purpose of this study was to investigate the actual conditions of radiation safety supervision in animal clinics using quality assurance (QA) and quality control (QC) of diagnostic X-ray units. The surveys for QA/QC, equipment condition, and safety supervision were carried out in 18 animal clinics randomly. The QA/QC included reproducibility of dose exposure, kVp, mAs, collimator accuracy test, collimator luminance test, X-ray view box luminance test, grounding system equipment test and external leakage current test. As a result, 44.44% of reproducibility of dose exposure was proper, 81. 25% of kVp test was good, and 100% of mAs test was appropriate. Also, 66.66% of collimator accuracy test was proper, 61.11% of collimator luminance test was good, 53.13% of X-ray view box luminance test was suitable. In addition, only 5.55% of grounding system equipment and ground resistance was proper, 63.64% of external leakage current test was appropriate in grounding system equipment test.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권3호
• /
• pp.127-138
• /
• 2018

Spoofing attacks including meaconing can provide a bogus position to a victim GPS receiver, and those attacks are notably difficult to detect at the point of view on the receiver. Several countermeasure techniques have been studied to detect, classify, and cancel the spoofing signals. Based on the countermeasure techniques, we have developed an anti-spoofing equipment that detects and mitigates or eliminates the spoofing signal based on raw measurements. Although many anti-spoofing techniques have been studied in the literatures, the evaluation test system is not deeply studied to evaluate the anti-spoofing equipment, which includes detection, mitigation, and elimination of spoofing signals. Each study only has a specific test method to verify its anti-spoofing technique. In this paper, we propose the performance evaluation test system that includes both spoofing signal injection system and its injection scenario with the constraints of stand-alone anti-spoofing techniques. The spoofing signal injection scenario is designed to drive a victim GPS receiver that moves to a designed position, where the mitigation and elimination based anti-spoofing algorithms can be successively evaluated. We evaluate the developed anti-spoofing equipment and a commercial GPS receiver using our proposed performance evaluation test system. Although the commercial one is affected by the test system and moves to the designed position, the anti-spoofing equipment mitigates and eliminates the injected spoofing signals as planned. We evaluate the performance of anti-spoofing equipment on the position error of the circular error probability, while injecting spoofing signals.

• 항공우주시스템공학회지
• /
• 제17권1호
• /
• pp.97-105
• /
• 2023

항공용의 센서 포드는 비행체 기동조건에서 유도된 비행 하중에 대하여 정적 구조시험을 통한 구조 건전성을 검증해야 한다. 이를 위해 센서 포드 전 구조체의 정하중 시험장비 개발이 필수적으로 요구된다. 본 논문에서는 시험요구도를 기본으로 정적 구조시험의 구성 및 시험 구조물, 시험체 구속장치, 하중 인가장치, 제어 및 계측장비 등의 설계, 제작, 조립 및 검증에 대한 방법과 절차들을 확보하였다. 결론적으로 센서 포드의 정하중 시험 및 데이터 획득을 성공적으로 수행하였으며, 시험장비의 신뢰성도 함께 입증하였다.

• 전력전자학회논문지
• /
• 제13권5호
• /
• pp.391-395
• /
• 2008

한국전력공사는 강진변전소에 FACTS 설비인 80MVA UPFC를 (주)효성과 공동으로 개발하여 2003. 5월 준공하였다. 강진 UPFC는 40MVA 병렬인버터와 40MVA 직렬인버터로 구성되어 있으며, 대용량 인버터 핵심기술은 지멘스와의 기술제휴로 개발되었다. 한국전력공사는 UPFC 운영을 통하여 확보된 기술을 기반으로 제어기술을 국산화하고 있으며, 현재 유지보수용으로 GTO Thyristor 밸브 시험 장비를 개발하였다. 본 설비는 기존 수작업에 의한 GTO Thyristor 밸브의 건전성 시험을 자동화하고, 자료를 체계적으로 이력 관리함으로써, UPFC 설비의 신뢰성 향상에 도움을 줄 것으로 기대된다.