• Journal of Korean Physical Therapy Science
• /
• v.8 no.1
• /
• pp.759-770
• /
• 2001

The purpose of this study is through a analysis between old diagnostic tests of the Internet Addiction Syndrome to make a new test model for the physical disturbance problems for the addiction persons. Suggestion treatment for the Internet Addiction Syndrome are follows: 1. Try to decide in advance how much time you will spend on the Net time a day. 2. Decide how much you want the Internet to be a part of each area of your life and then allocate time accordingly. 3. You may decide that you want to keep the Internet at work, and shut the door on it when you leave for home. 4. To physical exercise regularly. 5. Take frequent breaks. 6. Seek out friends and acquaintances who couldn't care less about the Internet. 7. Interact with people in a non-wired world. 8. Consult a Dr. if you can't solved.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.173-178
• /
• 2004

It is the purpose of this study to identify comprehensive fatigue characteristics of pavement concretes considering coarse aggregate types. The types of coarse aggregates considered are limestone, sandstone and granite, which are the most representative stones in Korea. The static strength tests were carried out to check the compressive strength, flexural strength at 7 and 28 days, and split tension strength at 56 day in order to minimize the various effect of strength during the test. The results are follows. The comprehensive fatigue models of pavement concretes were developed considering coarse aggregate types. The developed model showed a good relationship between aggregate types. The fatigue models with coarse aggregate types were shown, respectively. The combined fatigue models was also shown.

• Computers and Concrete
• /
• v.14 no.3
• /
• pp.263-277
• /
• 2014

This study investigated four electric field configurations of two-dimensional accelerate lithium migration technique (ALMT), including line-to-line, plane-to-line, contour-to-line and plane-to-plane, and analyzed the ion migration behavior and efficiency. It was found that the free ion distribution diagram and voltage distribution diagram were similar, and ions migrated in the power line direction. The electrode modules were used for the mortar specimen with w/c ratio of 0.5. The effectively processed areas accounted for 14.1%, 39.0%, 49.4% and 51.4% of total area respectively on Day 28. Larger electrode area was more advantageous to ion migration. In addition, it was proved that the two-dimensional electric field could be divided into different equifield line active regions, and regarded as affected by one-dimensional electric field, and the ion migration results in various equifield line active regions were predicted by using the duration analysis method based on the theoretical model of ion migration obtained from one-dimensional test.

• Archives of Pharmacal Research
• /
• v.19 no.5
• /
• pp.337-341
• /
• 1996

Propolid (bee-glue), known as a folk medicine, is a lipo;hilic material found in honeybee hives. In the present study on the anti-inflammatory effect of Korean propolis, it was extracted with ethanol, and used as a test material. The $LD_{50}$ value with the oral administration of ethanolic extract of Korean propolis (EEKP) was higher than 2g/kg in mice. The oral administration of the propolis extract (100mg/kg) significantly inhibited the development of hind paw edema induced by carrageenin in rats. the oral pretreatment of the propolis extract markedly inhibited the increase in vascular permeability and the number of writhing induced by acetic acetic acid in mice. Propolis extract, 50 and 100 mg/kg p.o. per day for 7 days, produced a significant inhibitory effect on granuloma and exudate formation in rats. This inhibitory effect was enhanced with the concomitant use of prednisolone (2.5 mg/kg). These results suggest that Korean propolis apparently has a strong anti-inflammatory activity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.5
• /
• pp.555-561
• /
• 2009

The established mathematical modeling methods have limitation to know the hydraulic characteristics at the wastewater treatment plant which are complex and nonlinear systems. So, an artificial neural network (ANN) model based on hydraulic characteristics is applied for modeling wastewater quality of a full-scale wastewater treatment plant using DNR (Daewoo nutrient removal) process. ANN was trained using data which are influents (TSS, BOD, COD, TN, TP) and effluents (COD, TN, TP) components in a year, and predicted the effluent results based on the training. To raise the efficiency of prediction, inputs of ANN are added the influent and effluent information that are in yesterday and the day before yesterday. The results of training data tend to have high accuracy between real value and predicted value, but test data tend to have lower accuracy. However, the more hydraulic characteristics are considered, the results become more accuracy.

• Journal of Environmental Science International
• /
• v.15 no.2
• /
• pp.185-191
• /
• 2006

In this paper, removal time of side form from concrete using OPC(ordinary Portland cement) and FAC(fly ash cement) are proposed by appling logistic model, which evaluates the strength development of concrete with maturity. W/B, types of cement and curing temperatures are adapted as test parameters. The estimation of strength development by logistic model has a good agreement between calculated values and measured ones. As for the removal times of form works suggested in this paper, as W/8 increases, curing temperature decreases and fly ash is used, removal time of side form is prolonged. Removal time of form from concrete using OPC suggested in this paper is shorter $2.5\~3.5$ days than those of KASS-5 (Korean Architectural Standard Specifications-5) in the range of over $20^{\circ}C$. And in the range of $10\~20^{\circ}C$ removal time of form is shorter than that of KASS-5 by as much as $4\~4.5$ days. The use of FAC results in an increase in removal time of form compared to that of OPC by about 1 day.

• Computers and Concrete
• /
• v.3 no.6
• /
• pp.389-400
• /
• 2006

This paper presents the investigations towards developing a better understanding on the contribution of steel fibers on the tensile strength of high-performance fiber reinforced concrete (HPFRC). An extensive experimentation was carried out with w/cm ratios ranging from 0.25 to 0.40 and fiber content ranging from zero to 1.5 percent with an aspect ratio of 80. For 32 concrete mixes, flexural and splitting tensile strengths were determined at 28 days. The influence of fiber content in terms of fiber reinforcing index on the flexural and splitting tensile strengths of HPFRC is presented. Based on the test results, mathematical models were developed using statistical methods to predict 28-day flexural and splitting tensile strengths of HPFRC for a wide range of w/cm ratios. The expressions, being developed with strength ratios and not with absolute values of strengths and are applicable to wide range of w/cm ratio and different sizes/shapes of specimens. Relationship between flexural and splitting tensile strengths has been developed using regression analysis and absolute variation of strength values obtained was within 3.85 percent. To examine the validity of the proposed model, the experimental results of previous researchers were compared with the values predicted by the model.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.3
• /
• pp.257-269
• /
• 2016

Early-strength-concrete (ESC) made of Type I cement with a high Blaine value of $500m^2/kg$ reaches approximately 60 % of its compressive strength in 1 day at ambient temperature. Based on the 210 compressive test results, a generalized rateconstant material model was presented to predict the development of compressive strengths of ESC at different equivalent ages (9, 12, 18, 24, 36, 100 and 168 h) and maximum temperatures (20, 30, 40, 50 and $60^{\circ}C$) for design compressive strengths of 30, 40 and 50 MPa. The developed material model was used to find optimum curing regimes for precast prestressed members with ESC. The results indicated that depending on design compressive strength, conservatively 25-40 % savings could be realized for a total curing duration of 18 h with the maximum temperature of $60^{\circ}C$, compared with those observed in a typical curing regime for concrete with Type I cement.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1551-1555
• /
• 2006

This study was carried out to investigate the use of three different mathematical models (Wood, Quadratic and Cubic) for describing the lactation curve of Akkaraman ewes. Data were collected from 42 ewes that were three years of age and from the same flock raised in The State Farm of $G{\ddot{o}}zl{\ddot{u}}$ in Konya Province. All ewes lambed in March. They were hand milked twice daily and the first milk test was performed with in the first month after lambing (mean = 27.8 day, SD = 4.26) in an attempt to describe the peak yield. The differences between estimated total milk yields by the models were not significant. The models were adequate for describing total milk yield. The differences between peak yields were not significant. The Wood model estimated the time of peak yield earlier than the other models and observed values (p<0.01). Especially the Cubic model's peak time was very close to really peak time (34.30 vs. 35.33 days). $R^2$ values of the models ranged from 85.85% to 96.20%. The Cubic model gave the best $R^2$ value (p<0.01). Correlation coefficients between descriptive values of the models changed from 0.32 to 1.00. Total milk yields of the models were highly correlated (above 0.99) with the total milk yield calculated by the Fleischmann method (p<0.01). As a result the Cubic model showed the best fit to the data collected from Akkaraman ewes and allowed a suitable description of the shape of the lactation curve.

• Journal of Korean Neurosurgical Society
• /
• v.57 no.2
• /
• pp.82-87
• /
• 2015

Objective : The aim of this study was to investigate voluntary wheel running behavior in the unilateral 6-hydroxydopamine (6-OHDA) rat model. Methods : Male Sprague-Dawley rats were assigned to 2 groups : 6-OHDA group (n=17) and control group (n=8). The unilateral 6-OHDA rat model was induced by injection of 6-OHDA into unilateral medial forebrain bundle using a stereotaxic instrument. Voluntary wheel running activity was assessed per day in successfully lesioned rats (n=10) and control rats. Each behavioral test lasted an hour. The following parameters were investigated during behavioral tests : the number of running bouts, the distance moved in the wheel, average peak speed in running bouts and average duration from the running start to the peak speed. Results : The number of running bouts and the distance moved in the wheel were significantly decreased in successfully lesioned rats compared with control rats. In addition, average peak speed in running bouts was decreased, and average duration from the running start to the peak speed was increased in lesioned animals, which might indicate motor deficits in these rats. These behavioral changes were still observed 42 days after lesion. Conclusion : Voluntary wheel running behavior is impaired in the unilateral 6-OHDA rat model and may represent a useful tool to quantify motor deficits in this model.