• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.588-595
• /
• 2016

This paper is a study on head bolts that are used in A/C compressors to reduce production cost and solve leak problems on the head bolt seat area that causes massive intermittent malfunctioning during production. In this study, the pre-heat treated steel, which was used as a material in the head bolt, eliminated the heat treatment process after forging. The pre-heat treated steel head bolts, which have 10 % lower tensile strength than the conventional SCM 435 head bolts, were selected after considering the results of creeping rupture properties, axial force, and stress concentration per tensile strength variation. Then, the performance test and the durability test with the A/C compressor that was assembled with the pre-heat treated steel head bolts were performed and verified. Based on the results, the pre-heat treated steel head bolts developed in this study saved 7.3 % in production cost by eliminating the heat treatment process and the logistics process. Furthermore, the leak problem on the head bolt seat area in the A/C compressor was addressed significantly on the mass production assembly line.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2045-2049
• /
• 2008

In this paper, we propose an novel architecture for H.264 High Profile Encoder Intra Prediction module. This designed module can be operated in 306 cycle for one-macroblock. To verify the Encoder architecture, we developed the reference C from JM 13.2 and verified the our developed hardware using test vector generated by reference C. We adopt plan removal and SAD calculation to reduce the Hardware cost and cycle. The designed circuit can be operated in 133MHz clock system, and has 250K gate counts using TSMC 0.18 um process including SRAM memory.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.11
• /
• pp.223-234
• /
• 2021

This study aims to examine whether operating cash flows influence banks' financial stability in Pakistan. The study employed annual panel data collected from annual reports of 20 commercial banks listed on the Pakistan Stock Exchange for the year 2011 to 2019. Free cash flow yield was taken as the dependent variable while cash flow ratio was selected as the independent variable, and net interest margin, income diversification, asset quality, financial leverage, the cost to income ratio, advance net of provisions to total assets ratio, capital ratio, financial performance, breakup value per share and bank size were taken as control variables. The study performed ordinary least square technique, random and fixed effects models, Hausman test, Lagrange multiplier test, descriptive and correlation analysis. Results showed that operating cash flows and net interest margin significantly and positively influenced banks' financial stability while the cost to income ratio and advances net of provisions to total assets ratio significantly and negatively associated with banks' financial stability. To improve financial stability, banks should become more cost-effective and enhance their liquidity levels by lowering lending activities. In the future, it would be useful to compare commercial and investment banks, also Islamic and conventional banks in the same research setting.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.279-286
• /
• 2002

Present all sorts of failure or no failure test methods are done for evaluate structural ability of pavement. It are Plane Plate Test, CBR Test, Benkelman Beam Test, FWD, Dynaflect, etc. but, each method of test not expect compatibility because the result very different by each method of test. Now among pavement's method of evaluation, no failure test gradually use because It quickly and simply obtain pavement's elastic modulus of each layer. But, It accompany expensiveness equipment, and It's degree of trust is lower against expensiveness equipment. Therefore this research practice comparative trustworthy Plane Plate Test, comparative low cost and quick Small FWD Test. And analyzed relation of Plane Plate Test with Small FWD Test.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1333-1342
• /
• 2010

It required excessive cost and effort to evaluate the quality of shotcrete mix for field test. Also, due to a myriad of field variables, it is difficult to get a standardized result for field test. And it is impossible to simulate the shotting process for indoor test. In this study, in order to overcome these problems, we developed a standardized Shotcrete Shotting Test Machine. Using this machine we performed shotcrete quality test and estimated the applicability of developed Shotcrete Shotting Test Machine by comparing with the results of field test.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.2
• /
• pp.63-75
• /
• 1993

As the CMOS technology becomes the most dominant circuit realization method, the cost problem for the test which includes both the transistor-level FET stuck-on and stuck-off faults and the gatelevel stuck-at faults becomes more and more serious. In accordance, this paper proposes a test set and its generation algorithm, which handles both the transistor-level faults and the gate-level faults, thus can unify the test steps during the IC design and fabrication procedure. This algorithm uses only the logic equation of the given logic function as the input resource without referring the transistor of gate circuit. Also, the resultant test set from this algorithm can improve in both the complexity of the generation algorithm and the time to apply the test as well as unify the test steps in comparing the existing methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.13-17
• /
• 2003

Requirements of a benchmarking for rapid prototyping systems and process usually include manufacturing time, cost (including system price), and dimensional accuracy. This paper deals with a benchmarking comparisons to investigate the functional requirements of RP system. A special designed IMS_T2 test part with dimensional. geometrical, and surface roughness features has been used in the inspection of RP processes. IMS_T2 test part was built on 5 commercially available RP machines which are relatively new model in Korea.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.653-658
• /
• 2000

For testing machine tools, we used test the work by measure of 3-D object that it was made by the machine tool. By reason of these, we have spent to the cost of measure and have delayed supply to user. In this study, we made a macro-program and a application program in order to test automatic the machine tool. So, if you constitute a ring core and a touch prove in machine tool, you should test the property of machine tool.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.189-189
• /
• 2000

A controller test on a sounding rocket using a testbed is discussed in the paper. Because of the high cost and the risk for the flight test the hardware simulation on the ground is performed. In this paper the conventional On/Off Controller is applied to the attitude control of a sounding rocket. The hardware simulation results are compared with those of the software simulation.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.431-437
• /
• 2000

The aim of the work described in this paper is to develope a pavement method for farm road. To this ends, a series of material test are conducted on in-situ soil which was mixed additives-coarse aggregate, polypropylene fiber, excellent soil compound etc. With the laboratory test results, in-situ pavement test was conducted during two years. The serious problem of the pavement is not appeared up to this time. And the measurement of field data is continued presently. The majority merits of this pavement method is low cost and using environmental materials.