• Journal of Nutrition and Health
• /
• v.30 no.10
• /
• pp.1229-1243
• /
• 1997

The purpose of this study were to :(a) investigate meal costs, plate waste costs, and advantages/disadvantages of conventional /commissary foodservices and (b) compare the effectiveness of commissary foodservice systems with that of conventional systems. Questionnaires were developed and mailed to 136 schools in Kyonggi-do. A total of 106 questionnaires were usable, resulting in a 77.9% response rate. Teacher's teaching of good food habits and students satisfaction with school foodservices were surveyed in three schools from each system. Moreover, plate waste was measured to express cost and benefit in currency. Data were analyzed using the SAS package for description analysis, t-test, $\chi$$^2$ test, ANOVA, and the Vilcoxon rank sum test. Approximately seventy percent of 294schools in Kyonggi-do were operating commissary systems and most of them were of the rural (reduced paid) type. The number of meals served varied significantly between types of foodservice. The results of this study indicated that average food , labor utility , and supply costs were saved in the commissary system and that the total meal cost/person for a day was 1218.7 won compared to 1452.4 won in the conventional system. Though total meal costs were saved in the commissary system, dietitians had difficulties cooperating with school foodservice committees and supporters associations, especially in satellites of the commissary system. In addition, dietitians and teachers in the commissary system did not carry out teaching activities on good food habits to students as often as in the conventional system. Other problems that dietitians recognized in the commissary system were difficulties in training employees and parents for portion control and serving relatively simple menus. Students, as customers of school foodservices, are very important for system evaluation . Students in the commissary system scored of food itself , cleanliness of tableware, waiting time, quantity of meal and food temperature significantly lower than students in the conventional system. Moreover , the rate of plate waste was 20.5% in the commissary system as compared to 3.3% in the conventional system. Cost-effectiveness (saving 233.7won/person/day) is the main benefit of the commissary system. However , because of lower satisfaction scores and a highest plate waste rate, 201.9won/ person were wasted in the commissary system. The results of this study suggest that increasing the number of meals served within a commissary system might maximize the efficiency of the system, but increasing the number of satellites is not recommended because it might be out of dietitians control in many aspects.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.603-606
• /
• 2000

The cost needed for the construction and management of highways in the whole nation is rapidly growing so the research that can decrease the cost is required. However, most of the highway specs have simply converted from those of other countries, including USA. Therefore, some of our design and construction specs were not the optimum ones based on our own situation, requiring a research under the actual traffic and environment of our nation. The use of test road develops many aspects of highway engineering. Those are evaluation of construction materials, a general overview of korea pavement design and serviceability under the actual traffic and environmental condition of the nation. It is also economical and efficient compared to the trial construction of each item in spreaded form. A test road, 7.7km long with two lanes, is being constructed on the Inner Central Expressway. In this test road, 2.7km is planned for asphalt pavement and 3.4km is planned for concrete pavement. Three test bridges and five earth retaining structures will be included in the test road. Based on the master plan, the major performance was progressing such as detailed research modules of each area, preliminary research for the future research, sensor surveys for the behavior analyses of pavements and structures with installation methods and data acquisition systems, the foundation research of Integrated Instrumentation System and the Management Plan for automated measurement. Some area(structure research division, geotechnical research division) was designed the instrumentation plan because some instrument sensors must be installed during the construction of the test road. And then the instrumentation plan of each area was enforcing because a large majority of the instrument sensors must be installed after the construction of the test road. The field surveys with material property tests and pilot instrumentation test with sensor tests was also performing in accordance with the construction in the field.

• Journal of KIISE:Software and Applications
• /
• v.36 no.1
• /
• pp.10-20
• /
• 2009

As unit testing should be performed repeatedly and continuously, it is a high-cost software development activity. Although there are many studies on unit test automation, there are less studies on automated test case generation which are worthy of note. In this paper, we discuss a study on automated test data generation from source codes and indicate algorithms for each stage. We also show some issues of test data generation and introduce an automated test data generating tool: CUTIG. As CUTIG generates test data not from require specifications but from source codes, software developers could generate test data when specifications are insufficient or discord with real implementation. Moreover we hope that the tool could help software developers to reduce cost for test data preparation.

• Communications for Statistical Applications and Methods
• /
• v.17 no.6
• /
• pp.853-863
• /
• 2010

The performance test in a public survey is conducted by a sample survey and the sampling rate of the performance test is a very important factor in the test process. Since the current sampling rate was decided empirically at an earlier time, it has been criticized for two points: the first is that it has a lack of a theoretical background on the decision for the sampling rate and the second is that the sampling rate should be improved in accordance with current test situations. In this paper, we review the present state of performance tests in public surveys in Korea and study the relationship between the rate of the performance test and fitness probability, number of tests, and the success rate in order to create a theoretical background to improve the test rate. In addition, we discuss relationship between the test rate and cost in the performance test.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.1
• /
• pp.91-101
• /
• 2023

Modeling and Simulation(M&S) technology has been widely used to solve constraints such as time, space, safety, and cost when we implement the same development and test environments as real warfare environments to develop, test, and evaluate weapon systems for the last several decades. The integration and test environments employed for development and test & evaluation are required to provide Live Virtual Construction(LVC) simulation environments for carrying out requirement analysis, design, integration, test and verification. Additionally, they are needed to provide computing environments which are possible to reconfigure computing resources and software components easily according to test configuration changes, and to run legacy software components independently on specific hardware and software environments. In this paper, an Integration Test and Simulation for Engagement Control(ITSEC) bed using a bare-metal virtualization mechanism is proposed to meet the above test and simulation requirements, and it is applied and implemented for an air missile defense system. The engagement simulation experiment results conducted on air and missile defense environments demonstrate that the proposed bed is a sufficiently cost-effective and feasible solution to reconfigure and expand application software and computing resources in accordance with various integration and test environments.

• Korea Journal of Hospital Management
• /
• v.17 no.2
• /
• pp.52-72
• /
• 2012

In this study, we examined the effect of customer satisfaction and switching cost on continuous use intention to suggest how organizations can retain their customers when market growth slows down and competition becomes stronger. We carefully developed and modified survey instruments through a pre-test, and subsequently surveyed 432 dental care users in Seoul and Busan areas. As a result of regression analysis, higher procedural learning switching cost, relational switching cost, and customer satisfaction were manifested in the increased continuous use intention. In contrast, higher financial switching cost and customer satisfaction with insufficient effort for information acquisition led to decreased switching intention. In addition, procedural initial switching cost and residents in Seoul led to increased switching intention. Understanding continuous use intention and switching intention is important for healthcare institutions striving to maintain market position. The findings of this study suggest a paradigm shift from conventional transactional marketing to strategic relational marketing to be effective in the healthcare environment today.

• Journal of Environmental Science International
• /
• v.26 no.3
• /
• pp.269-280
• /
• 2017

To lower the operational cost of microbubble generation by electrolysis, optimization of parameters limiting the process must be carried out for the process to be fully adopted in environmental and industrial settings. In this study, four test electrodes were used namely aluminum, iron, stainless steel, and Dimensionally Sable Anode (DSA). We identified the effects and optimized each operational parameter including NaCl concentration, current density, pH, and electrode distance to reduce the operational cost of microbubble generation. The experimental results showed that was directly related to the rate and cost of microbubble generation. Adding NaCl and narrowing the distance between electrodes caused no substantial changes to the generation rate but greatly decreased the power requirement of the process, thus reducing operational cost. Moreover, comparison among the four electrodes operating under optimum conditions revealed that aluminum was the most efficient electrode in terms of generation rate and operational cost. This study therefore presents significant data on performing costefficient microbubble generation, which can be used in various environmental and industrial applications.

• Journal of Korean Academy of Nursing
• /
• v.36 no.3
• /
• pp.503-513
• /
• 2006

Purpose: This study focused on analysing costs per home health care nursing visit based on home health care nursing activities in medical institutes. Method: The data was collected in three stages. First, the cost elements of home health care nursing services were collected and 31 home care nurses participated. Second, the workload and caseload of home care nursing activities were measured by the Easley-Storfjell Instrument(1997). Third, the opinions on improving the home health care nursing reimbursement system were collected by a nation-wide mailing survey from a total of 125 home care agencies. Result: The cost of home health care nursing per visit was calculated as 50,626\. This was composed of a basic visiting fee of $35,090{\\}({\fallingdotseq}355$)$ and travel fee of $15,536{\\}({\fallingdotseq}15$)$. The major problems of the home care nursing payment system were the low level of the cost per visit, no distinction between first visit and revisits, and the limitations in health insurance coverage for home health care nursing services. Conclusion: This study's results will contribute as a baseline for establishing policies for improvement of the home health care nursing cost and for applying a community-based visiting nursing service cost.

• Journal of Industrial Technology
• /
• v.37 no.1
• /
• pp.32-36
• /
• 2017

In this study, as part of a research on the development of economical high-performance concrete with high strength and high quality, the physical properties of high-performance concrete were analyzed by substituting a certain amount of low-cost domestic silica fume exempted from the re-importation type distribution structure of the domestic production and the existing high-priced silica fume distribution structure. Performing tests to identify the physical properties of the fresh and hardened concrete and durability analogy of the concrete which use low-cost domestic silica fume and imported silica fume, the chloride ion penetration resistance test result showed that the strength difference between the low-cost silica fume and the imported silica fume is not big but the strength of the low-cost silica fume was measured higher than the imported silica fume. The chloride ion penetration resistance of all variables was measured as "very low". Since the low-cost domestic silica fume can be used as a high-performance admixture of concrete, the results suggest that it is possible to produce a more economical high-performance concrete.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.172-177
• /
• 2006

This paper presents a method to improve reliability considering dispersed generator(DG) installation and interruption cost with load types. It is used to the different interruption costs with load pattern of daily peak load. The objective functions such as power losses cost operation cost of DG, power buy cost and interruption cost are minimized for reliability improvement and efficient operation. The several indices for reliability evaluation are improved by dispersed generator installation. The proposed method is applied to IEEE 13 bus test systems to demonstrate its effectiveness.