• Journal of Preventive Medicine and Public Health
• /
• v.9 no.1
• /
• pp.109-116
• /
• 1976

Reorganization of myun health care service is one of the main issues in health care delivery in rural Korea. The fundamenta, concept of the role and function of the myun health subcenter is that it is the basic unit of rural health care service and is to provide comprehensive health care service through the integration of curative and preventive services. The aim of this study is to analyze the patterns of curative activities in the myun health subcenter in terms of the most prevalent types of diseases, necessary diagnostic methods and required equipment, types of treatment, necessary drugs and materials, and finally the cost of curative services. The population on which this study was done was the 1596 patients who visited the two myun health subcenters (Sunwon Myun and Naega Myun) in Kang Wha County, the area of the Yonsei University Community Health Teaching Project, during period from May 1, 1975 to June 10, 1976. For the patient's record in the clinic, problem oriented medical records were used. Decisions regarding the disease classification, the diagnostic methods used and selection of the most appropriate and adequate medical treatment were made by a group of three experienced physicians after reviewing the medical records which had been written by public physicians who were treating patients in the study area. The records were reviewed by resident staff members of the Department of Preventive Medicine, of Yonsei University College of Medicine. A brief summary of results of the study is as follow: 1. 29.9% of the patients who visited the clinics were ages between 0-4. No sex difference was observed among patients less than 20 years of age. However, among patients over 20 years old, females predominated. Thus it is evident that the majority of patients were either children or mothers and grandmothers. 2. The distance from the individual villages to the myun health subcenter was one of important factors in determining the ratio of clinic visits. However, other factors such as the activities of the health workers also affected the rates substantially. 3. The most common 25 diseases comprised 90.2% of all the diseases recorded. Acute respiratory infection (25.5%), Skin (12.7%) , diarrheal diseases (6.8%), neuralgia and back pain (4.9%) and. all other injuries (3.9%) were the five most common diseases. 4. Of all the diseases diagnosed and treated, 9.2% required simple laboratory tests for diagnosis, 6.5% required X-ray examination, and altogether 13.6% required either laboratory test or X-ray examination. 5. Treatment and management of 42.0% of the cases could be accomplished with simple, inexpensive drugs, 12.8% required the use of more expensive drugs (mostly antibiotics) and injections were required in 19.7% of the cases. Minor surgery and referral were necessary in 5% of the cases. 6. The cost for diagnosis and treatment was estimated with a standard which was set by general concensus. The average cost of diagnosis was 144 per case and the cost of treatment was 726 per case, The Total average cost per visit was 870.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.265-271
• /
• 2018

This paper presents a method for detecting damage to a structure at low cost using its impedance. The impedance technique is a typical method to detect local damage for structural health monitoring. This is a common technique for estimating damage by monitoring the electro-mechanical admittance signal of the structure. To apply this technique, an expensive impedance analyzer is generally used. On the other hand, it is necessary to develop a low-cost variant to effectively disseminate the technique. In this study, a method based on the transfer impedance using a function generator and digital multimeter, which are generally used in the laboratory instead of an impedance analyzer, was developed. That is, this technique estimates the damage by comparing the damage index using the amplitude ratio of the output voltage measured in the healthy and damaged state. A transfer impedance test was carried out on a steel specimen. By comparing the damage index, the presence of damage could be assessed reasonably. This study is a basic investigation of an impedance-based low-cost damage detection method that can be used effectively for structural health monitoring if supplemented with future research to estimate the damage location and severity.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.3
• /
• pp.43-54
• /
• 2019

This study has purpose in analyzing the characteristics of small weddings reported in the internet news, and suggesting the plan to activate it. The materials are about 248 internet news from 2012 to 2018, and frequency analysis and chi-square test were conducted for it. The research result is like the following. 1. It was reported that the saving type was higher in 2016 and the money gift improving type was higher rate in 2015. 2. As a venue for wedding, it was reported the saving type and free type choose the public institution, the small size type hotels, the peculiar type outdoor and house, money gift improving type hotel and public institutions. 3. The saving type, peculiar type and free type were likely to be reported as information transfer, and the small size type and the money gift improving type were likely to be reported to suggest the case of small weddings. 4. Case type showed high rate for public institutions and hotels for small weddings, and information type showed high rate for public institution for small wedding venue. 5. Case type and information type showed favorable rate for small wedding, and opinion type appeared similar favorable rate and unfavorable rate for small weddings. 6. Ordinary people showed high rate to be reported with saving type, celebrities were with small size type. And also the ordinary people showed high rate public institutions, celebrities with hotel as small wedding venue. 7. The items to save the cost in small wedding included more of venue renting cost, reception cost, wreath/decoration cost, photo filming cost than marriage expenses and wedding gifts, house.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.289-295
• /
• 2024

This study analyzes the correlation between the accracy of rifle and the result of engagement. And estimates the improvement cost of the rifle accordingly. For this experiment, an engagement class simulation model(AWAM: Army Weapon Effectiveness Analysis Model) was used. We also selected the rifle, which is a portable weapon for the experiment. Prior to this experiment, we conducted a reliability test(VV&A: Verification, Validation and Accreditation) on the model. The VV&A process is mainly done during the development of the DM&S model, which is also necessary for the operation of the M&S. We confirmed the need for VV&A during the experiment and obtained reliable experimental results using the corrected values. In the Accuracy Experiment we found that the 20% improvement is the most effective. And we were able to estimate the cost of acquiring a rifle with a 20% higher accuracy. The cost was estimated by simple regression analysis based on the price of the current rifle. Through this study, we could know the impact of the accuracy of rifle on the experimental results and estimate the cost of improved rifle.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.3
• /
• pp.141-147
• /
• 2018

In a time when product development cycles are getting shorter and shorter, many companies are making efforts to develop products with high reliability in a short period of time, accelerated life test is widely used as a method to quickly evaluate reliability. Accelerated life test reduces the test life or the life of the product from the observed data by shortening the lifetime of the product or abruptly lowering the performance under the worse condition than the actual condition in order to shorten the test cost or the test time. In this paper, BL3640A-06P+RB35, DC12V model, which is used in the support device of an automatic rotation type digital signage, which display various information such as textures and images on a display screen in a public place or a commercial space, BLDC motors were subjected to a constant stress test and at the rotational speed of 1rpm, $180^{\circ}$ rotation and reverse rotation under actual use conditions, the stress was imposed on the rotating speed of 2rpm and the weight of the actual installed product from 22.2kgf to 10kgf were installed. The lifetime of the actual use environment condition is 23,545 hours and the rotation speed is accelerated. The life time of the acceleration condition with the additional weight is 1,380 hours. The acceleration factor is calculated as 17.06, the one year guarantee test day is 235 days to 14 days, of the period from 470 days to 28 days, and the third year from 704 days to 42 days. The test date of the BLDC motor was tested on the shortened test date, and the rotational speed and the current value were measured. It is found that there is no defect even if it operates as the test date corresponding to the specified one year warranty period and the 3 year accelerated life test which is experimented. Using the statistical technique of the regression analysis the expected time for the motor to defect to #4 samples was 20 years.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.744-753
• /
• 2021

This study suggests ways to improve the standard test method and judgment criterion for the "Eco-toxicity Test" based on the rules and regulations provided in 'performance and qualifying test standards for marine pollution prevention materials and chemicals' in the Republic of Korea. Compared with the relevant references of other countries, this study attempted to find the limitations in the existing standards. As for the growth inhibition test of algae using Skeletonema costatum as an indicator, applying comparative analysis to measure specific growth rates, together with statistical analysis, instead of applying current methods, judged by the appearance of colors from the culture medium was suggested. Considering the exponential growth phase of the test species, the test duration was suggested to be reduced to less than four days. For the test with fish as an indicator, resetting the appropriate body size was suggested to, show consistent sensitivity against chenicals applied during testing. Furthermore, it is necessary to consider the criteria needs, which should be established in reasonable and objective ways. For the testing species, marine rotifer, Brachionus plicatilis could be a replacement for Artemia sp., and a bivalve for fish in the test. To improve the performance effectiveness of the "Eco-toxicity test", it is worth considering the designation of accredited testing institutes, by placing it in the same loop. Thus it is also expected to have a reliable management system in place, having the capacity of cost calculation properly and adjusting testing items if required.

• Laser Solutions
• /
• v.7 no.2
• /
• pp.1-10
• /
• 2004

This work was attempted to join SCP sheet and STS304 sheet by using Nd:YAC laser beam. SCP sheet has good formability and low cost, while STS304 has excellent corrosion resistance and mechanical properties in high temp. In this experiment, butt joint type was used to develop the tailored blank welding for dissimilar steel. Sheets which have different thermal properties. Computer simulation was conducted to obtain the off-set position for efficient welding by considering laser power, scanning speed, focal length and basic properties. The result showed that the optimum thermal distribution was obtained when the laser beam was irradiated at $0.05{\sim}0.1$ mm off-set toward the SCP sheet side. The experiment was conducted based on the result of computer simulation to show the same optimum conditions. Optimum conditions were 3KW in laser beam power, 6m/min in scanning speed, -0.5mm in focal position, 0.1mm off-set toward SCP. Microhardness test, tensile test, bulge test, optical microscopy, EDS, and XRD were performed to observe the microstructure around fusion zone and to evaluate the mechanical properties of optimum conditions, The weld zone had high microhardness values by the formation of the martensitic structure. Tensile test measured the strength of welded region by vertical to strain direction and the elongation of welded region by parallel to strain direction. Bulge test showed $52\%$ formability of the original materials. Bead shape, grain size, and martensitic structure were observed by the optical microscopy in the weld zone. Detailed results of EDS, XRD confirmed that the welded region was connected of martensitic structure.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.269-281
• /
• 2010

The cone penetration test(CPT) has been increasingly used for in situ site characterization. However, the use of CPT is often limited due to specific site conditions depending on the cone size, geometry, and capacity of the CPT system used. In South Korea, it has generally been considered that the CPT could be satisfactorily performed only in soft soils. Louisiana State University/ Louisiana Transportation Research Center has implemented a field-rugged continuous intrusion miniature cone penetration test (CIMCPT) system since the 1990s. The miniature cone penetrometer of the CIMCPT system has a cross-sectional cone area of $2cm^2$ allowing finer soil profiles compared to the standard $10cm^2$. The reduced cross-sectional area also enables a system capacity reduction leading to cost saving and ease in maintenance. In addition, the continuous intrusion mechanism allows fast and economic site investigations. Samsung C&T Corporation has recently implemented a similar CIMCPT system. In this study, case studies on the field application of Samsung CIMCPT system for the last 2 years are presented to illustrate its performance investigation and its usefulness and limitation. Results of the case studies show that the CIMCPT system can be applied to soils with cone tip resistance($q_c$) values up to about 30MPa and allows a reliable and useful way to characterize soft soils. The results also show that the rod buckling limits the investigation depth by the system and the large contact pressure of the CIMCPT truck prevents the use of the system at sites with soft surface soils. According to the results of the case studies, the Samsung CIMCPT system has been being upgraded with a miniature cone with a longer rod, a crawler-type transportation system, a pre-boring system, and so on.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.2 s.75
• /
• pp.67-74
• /
• 2007

Maritime and Ocean Engineering Research Institute (MOERI), a branch of KORDI, has designed and manufactured a model of an autonomous underwater vehicle (AUV) named ISiMI (Integrated Submergible for Intelligent Mission Implementation). ISiMI is an AUV platform to satisfy the various needs of experimental test required for development of challenging technologies newly investigated in the field of underwater robot; control and navigational algorithms and software architectures. The main design goal of ISiMI AUV is downsizing which will reduce substantially the operating cost compared to other vehicles previously developed in KORDI such as VORAM or DUSAUV. As a result of design and manufacturing process, ISiMI is implemented to be 1.2 m in length, 0.17 m in diameter and weigh 20 kg in air. A series of tank test is conducted to verify the basic functions of ISiMI in the Ocean Engineering Basin of MOERI, which includes manual control with R/F link, auto depth, auto heading control and a final approach control for underwater docking. This paper describes the implementation of ISiMI system and the experimental results to verify the function of ISiMI as a test-bed AUV platform.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.59-66
• /
• 2010

Around a toll plaza, vehicles do such maneuvers as slow down, stop, and speed up to pay their tolls when they use ordinary toll gates. They can be expected more fuel consumptions compared to the vehicles which use the Hi-pass, a Korean type of Electronic Toll Collection System(ETCS). To measure the exact amount of difference between the two gas consumptions, we equipped a test vehicle with a measurement system and constructed a model toll gate on our test field. Through the field tests on fuel consumptions, we could confirm a 36.7 % of energy saving when the test car used the Hi-pass. Then we projected the result on the total traffic volumes which had used national expressway network for five months from January 2009. Projected to the whole traffic, potential cost savings reached 5.34 billion won. We expect this result be frequently mentioned of to prove the fuel efficiency of the Hi-pass system.