• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.749-752
• /
• 2003

The HLA is defined by three components: (1) Rules, (2) the HLA Interface Specification, and (3) the Object Model Template(OMT). The RTI(Run-Time Infrastructure) software implements the interface specification. It provides services in a manner that is comparable to the way a distributed operating system provides services to applications. A way to test whether is suitable for a standard, and all service was implemented is tested through two phases of processes to verify the RTI which proposed in DMSO. In this paper, we discuss Level One Test Procedures and a method. Confirms whether RTI was implemented in Interface Specification according to Level One Test Procedures appropriately through a test. Develops Test Suite for every each step to test whether a correct command and the expected results are occur.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.1
• /
• pp.38-47
• /
• 2024

PURPOSE. This study aims to evaluate the accuracy of different shade selection techniques and determine the matching success of crown restorations fabricated using digital shade selection techniques. MATERIALS AND METHODS. Teeth numbers 11 and 21 were prepared on a typodont model. For the #11 tooth, six different crowns were fabricated with randomly selected colors and set as the target crowns. The following four test groups were established: Group C, where the visual shade selection was performed using the Vita 3D Master Shade Guide and the group served as the control; Group Ph, where the shade selection was performed under the guidance of dental photography; Group S, where the shade selection was performed by measuring the target tooth color using a spectrophotometer; and Group I, where the shade selection was performed by scanning the test specimens and target crowns using an intraoral scanner. Based on the test groups, 24 crowns were fabricated using different shade selection techniques. The ΔE values were calculated according to the CIEDE2000 (2:1:1) formula. The collected data were analyzed by means of a one-way analysis of variance. RESULTS. For the four test groups (Groups C, Ph, S, and I), the following mean ΔE values were obtained: 2.74, 3.62, 2.13, and 3.5, respectively. No significant differences were found among the test groups. CONCLUSION. Although there was no statistically significant difference among the shade selection techniques, Group S had relatively lower ΔE values. Moreover, according to the test results, the spectrophotometer shade selection technique may provide more successful clinical results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.800-803
• /
• 2004

This paper describes the design and implementation of the T=1 protocol based on lava Card. The T=1 protocol implemented in this paper complies with ISO/IEC 7816 standard. Also, JCOS(Java Card Operating Systems) including the contactless card protocol conforms to Java Card 2.2.1 specification and is running on 32-bit ARM7/TDMI processor. The protocol stack proposed and implemented in this paper is easy to maintenance of protocol independently. To verify the T=1 protocol implemented in this paper we tested the T=1 protocol scenarios defined in ISO/IEC 7816-3 Annex A. And we tested using USIM(Universal Subscriber Identity Module) cards, which include the implemented T=1 protocol. The T=1 protocol was tested and passed all against the specification 3GPP TS 31.122, which was the Conformance Test Specification for USIM cards including the test suites of both transmission protocols.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.126-146
• /
• 2000

To develop and evaluate formaldehyde measurement method using 2,4-dinitro-phenylhydrazine (2,4-DNPH) coated sampler and gas chromatography, laboratory test and field test were conducted. Results of this study are as follows. Limit of detection(LOD) of measurement methods, HPLC-UVD, GC-NPD and GC-FID, is $0.008{\mu}g/m{\ell}$ $0.060{\mu}g/m{\ell}$, $0.472{\mu}g/m{\ell}$ respectively. Coefficiency of measurement methods, HPLC-UVD, GC-NPD and GC-FID, is 0.008, 0.009, 0.020 respectively. Desorption efficiency of sep-pak xposure aldehyde sampler and sorbent sample tube is 1.05(range : 0.99 - 1.12), 1.02(range : 0.99 - 1.06) respectively. Samples of sorbent sample tube and sep-pak xposure aldehyde sampler turned out to be stored at refrigerator, according to storage test results. Measurement methods of HPLC-UVD, GC-NPD, GC-FID, according to results of precision for the combined sampling and analytical procedure, became acceptable to OSHA evaluation standard. Field test using exposure chamber met the NIOSH overall uncertainty recommendation(less than 25%). Overall uncertainty of Sepak-HPLC(UVD), Tube-GC(NPD), Tube-GC(FID) is 11.0% - 17.0%. Consequently gas chromatography(GC-NPD, GC-FID) and high performance liquid chromatography(EPA TO-11) using 2,4-DNPH coated sampler for formaldehyde measurement turned out to be suitable to measure personal formaldehyde exposure at workplaces.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.1
• /
• pp.103-108
• /
• 2016

Carbon Capture and Storage technologies are recognized as key solution to meet greenhouse gas emission standards to avoid climate change. Although MEA (monoethanolamine) is an effective amine solvent in $CO_2$ capture process, the application is limited by high energy consumption, i.e., reduction of 10% of efficiency of coal-fired power plants. Therefore the development of new solvent and improvement of $CO_2$ capture process are positively necessary. In this study, improvement of $CO_2$ capture process was investigated and applied to Test Bed for reducing energy consumption. Previously reported technologies were examined and prospective methods were determined by simulation. Among the prospective methods, four applicable methods were selected for applying to 0.1 MW Test Bed, such as change of packing material in absorption column, installing the Intercooling System to absorption column, installing Rich Amine Heater and remodeling of Amines Heat Exchanger. After the improvement construction of 0.1 MW Test Bed, the effects of each suggested method were evaluated by experimental results.

• Journal of Oriental Neuropsychiatry
• /
• v.18 no.1
• /
• pp.1-14
• /
• 2007

Objective : The purpose of this study was to investigate the protective effects of Cheongsimondam-tang(COT) on the animal model of depression induced immobilization stress. Method 1) Male rats were used for this experiment. The subject were divided into 4 groups(1. normal 2. saline solution administered during immobilization stress treatment 3. COT of 100mg/kg administered 4. COT of 400mg/kg administered). 2) Immobilization stress was treated for 1 hours on day. During 2 days of immobilization stress treatment, they were executed forced swimming test, passive avoidance test, elevated plus maze test. Corticosterone in blood were measured Results 1) In EPM test, stress group showed significantly increased anxiety, COT groups showed significantly decreased anxiety. 2) In forced swimming test, COT groups did not show significantly decreased immobilization. 3) In passive avoidance test, stress group showed significantly decreased learning execution, COT groups showed significantly increased learning execution. 4) Stress group showed significantly increase in serum level of corticosterone, COT of 400mg/kg group showed significantly decreased serum level of corticosterone. Conclusion : These results suggest that Cheongsimondam-tang(COT) is effective in the treatment of depression.

• Animal Bioscience
• /
• v.35 no.7
• /
• pp.1100-1108
• /
• 2022

Objective: The objective of this study was to evaluate the effect of waste cooking oil (WCO) addition on ammonia (NH₃) emissions during the composting of dairy cattle manure under two aeration conditions. Methods: The composting tests were conducted using the laboratory-scale composting apparatuses (14 L of inner volume). Three composting treatments (Control, WCO1.5, and WCO3, with WCO added at 0 wt%, 1.5 wt%, and 3 wt% of manure, respectively) were performed in two composting tests: aeration rate during composting was changed from 0.55 to 0.45 L/min in Test 1, and fixed at 0.3 L/min in Test 2, respectively. The NH₃ emitted and nitrogen losses during the composting were analyzed, and the effect of the addition of WCO on NH₃ emissions were evaluated. Results: Both tests indicated that the composting mixture temperature increased while the weight and water content decreased with increasing WCO content of the composting mixtures. On the other hand, the NH₃ emissions and nitrogen loss trends observed during composting in Tests 1 and 2 were different from each other. In Test 1, NH₃ emissions and nitrogen losses during composting increased with increasing WCO contents of the composting samples. Conversely, in Test 2, they decreased as the WCO contents of the samples increased. Conclusion: The WCO addition showed different effect on NH₃ emissions during composting under two aeration conditions: the increase in WCO addition ratio increased the emissions under the higher aeration rate in Test 1, and it decreased the emissions under the lower aeration rate in Test 2. To obtain reduction of NH₃ emissions by adding WCO with the addition ratio ≤3 wt% of the manure, aeration should be considered.

• Journal of Environmental Health Sciences
• /
• v.20 no.4
• /
• pp.80-89
• /
• 1994

It was reported that BCF's (Bioconcentration Factor) on Carbaryl and BPMC in concentration of 1, 2, 5 and 10 ppm, previously. Carassius auratus(goldfish) was chosen as test organism. Carbamates in fish and in test water were extracted with n-hexane and acetonitrile. GC-ECD was used to detecting and quantitating of Carbamates. Also, partition coefficients were determined with Stir flask method. To evaluate environmental toxicological profiles of tested compounds, experimental concentration were 0.05, 0.1 and 0.5 ppm in contrast to previous report. It was considered that higher BCFs of BPMC due to its higher partition coefficient compared to Carbaryl. The obtained results were as follows: 1. It was possible to determine short term BCF of Carbaryl and BPMC through relatively simple procedure in environmental concentrations. 2. BCF$_3$ of Carbaryl in concentration of 0.05, 0.1 and 0.5 ppm were 4.666 $\pm$ 0.002, 3.622 $\pm$ 0.004, 1.200 $\pm$ 0.002 and BCF$_5$ were 3.897 $\pm$ 0.005, 4.219 $\pm$ 0.017 and 1.186 $\pm$ 0.054, respectively. In the case of BPMC in same condition, BCF$_3$ were 4.077 $\pm$ 0.014, 4.900 $\pm$ 0.005, 4.750 $\pm$ 0.009 and BCF$_5$ were 3.465 $\pm$ 0.010, 4.612 $\pm$ 0.011 and 4.075 $\pm$ 0.012, respectively. 3. Carbaryl concentration in fish extract was increased as increasing test concentration, but BCF were decreased as prolonging test period, especially dropped at 0.5 ppm. 4. In the case of BPMC, BCF were decreased as increasing test concentration, but the concentration in fish extract of 3-day test group was slightly higher than that of 5-day test group. 5. Higher BPMC concentration in fish extract was due to its higher partition coefficient to compared with Carbaryl. 6. Determined logP of Carbaryl and BPMC were 2.200 and 3.180. But the calculated BCF using suggested equation was so different that predict BCF. It is suggested that BCF's of Carbamates have to be determined by experiment.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.81-86
• /
• 1970

This report was prepared to compare and analyze the testing method and classification of winding test in Korea to that in Japan, and the obtained results, which had been carried out, in Korea, from Sep. to Nov. in 1968 and in Japan through June in 1968, was as followings. 1. In Korean raw silk, (21 D.) the average number of breaks on winding test showed 5.91 by Korean Method but showed 8.6 by Japanese method and the latter increased to 2.7. On the other hand in Japanese raw silk, it showed 3.6 by Korean method but 4.7 by Japanese method and the latter increased to 1.1. (See Table 2,3) 2. It was seemed the tendency that the lot distribution of breaks number in Korean silk was mostly concentrated to the breaks No. 3,4 and 5(48％) by Korean method but in case of Japanese method to the breaks number 5,6 and 7(36％), and the tendency that the concentration depended mostly on the increased number of breaks. In Japanese raw silk, it was seemed the tendency that the lot distribution of breaks number was mostly concentrated to the breaks number 1. 2, and 3 (55％) by Korean Method but in case of Japanese Method to the breaks number, 2,3 and 4(50％) and the tendency that the concentration was as similar as the above. (See Table 2,3) 3. It was found the tendency that the distribution of breaks number during the open winding test was mostly concentrate red to the average number of breaks not only in Korea but in Japan. The rate 0: non-breaks, however, showed 43％ of Japan, to 7％ of Korea. (See Table 4) 4. Applying Table 1,2 to the Classification of Korea and Japan, the class distribution by Korean table showed 68％ of class 1(6), 22％ of cl ass 2(10) and 9％ of class 3(15) in Korean silk, while that by Japanese table showed 13％ of class 1(4), 56％ of class 2(10) and 29％ of class 3(18). And then the testing result to be class 1 or 2 by Korean table was. degraded from class 1 to class 2 of 55％ and from class 2 to class 3 of 20％ down. In Japanese silk, however, the class distribution by Korean table showed 85％ of class 1 (4), 10％ of class 2(10) and 5％ of class 3(18) but that by Japanese table showed 60％ of class 1(4), 33％ of class 2(10) and 7％ of class 3(18). And then there was little difference in the rate of class distribution. 5. Through the above investigation, it was seemed that Japanese classification table was only prepared for the r∼w silk of Japan, considering that the width of class 1(4) in winding table was greatly tighter than that of Korea. Because it was generally evaluated that Korean silk in quality especially in the winding test was better (next to Japan) than any other countries. 6. We could venture to estimate that, applying to Japanese method, the testing result of break number in Korean silk would show from about 6 by Korean method to 9. And then it would be found degrading hi the testing result of winding test increased gradually.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.67-73
• /
• 2021

The need for precise location data is growing across numerous markets, and so is the number of affordable high-precision GPS receivers. In this paper, we validated the performance of RTAP2U, a low-cost high-precision RTK receiver that was recently released. Two positioning modes were tested: static and driving. The static test conducted Zero-Baseline Single-RTK and Network-RTK survey for 57 hours and 51 hours, respectively. For the driving test, Network-RTK survey was conducted using VRS services provided by NGII based on Trimble PIVOT and Geo++ GNSMART. The static test showed about 1 cm horizontal and vertical accuracies, which is very stable considering the test duration longer than 50 hours. The integer ambiguity FIX rate marked a solid 100%. The driving test result also reached a 100% FIX rate. Horizontal and vertical accuracies were better than 2 cm and 3 cm, respectively. Researchers can refer to this paper when considering affordable high-precision GPS receivers as an option.