• Title/Summary/Keyword: Test 1.1 & 2.1

Search Result 37,430, Processing Time 0.074 seconds

The Study of Validity in Active Movement Control test for Low Back Pain Patients with or without Hamstring Shortening (슬괵근 단축 유무에 따른 요통환자에 대한 능동적 움직임 조절 검사의 타당도 연구)

  • Oh, Se-Jun;Choi, Jong-Duk
    • Journal of the Korean Society of Physical Medicine
    • /
    • v.7 no.4
    • /
    • pp.443-450
    • /
    • 2012
  • PURPOSE: This study was investigated to find the validity of active movement control test for low back pain patients with or without hamstring shortening. METHODS: The subjects of this study were 28 subjects and all of them agreed to participate in the study. All subjects were classified according to 4groups. Group1 was no LBP, no hamstring shortening. Group2 was no LBP, hamstring shortening. Group3 was LBP, no hamstring shortening. Group4 was LBP, hamstring shortening. We measured to see their low back pain and hamstring shortening with VAS, Goniometer for active movement control test. We analyzed the data using Cochran Q test and crosstabulation for agreement index. RESULTS: The results of this study were as follows : 1) Low back pain had effect on active movement control by Group1 and Group2. 2) Hamstring had effect on active movement control by Group1 and Group2 3)Low back pain with or without hamstring shortening had effect on active movement control by Group4 CONCLUSION: According the results of this study, active movement control test were significantly influenced on low back pain and hamstring interaction.

Planar (Rolling) Shear Strength of Structural Panels Using 5-point Bending Test (5점 휨하중 시험법을 사용한 구조용 판넬의 굴림전단강도)

  • Oh, Sei Chang
    • Journal of the Korean Wood Science and Technology
    • /
    • v.46 no.5
    • /
    • pp.425-436
    • /
    • 2018
  • This study was conducted to evaluate the planar (rolling) shear strength of OSB (oriented strand board) panels and domestic plywood through 5 point bending test method in ASTM D2718 standard. The test specimens were prepared in parallel and perpendicular direction to major axis (along the length of panels) and tested up to failure, and failure modes were also examined. From the test results, rolling shear strength were found to be $1.32{\sim}1.94N/mm^2$ in parallel to major axis, and $1.46{\sim}1.99N/mm^2$ in perpendicular to major axis respectively. Little difference was found between parallel and perpendicular direction of rolling shear strength. There were no statistically significant differences in rolling shear strength between Canadian OSB and domestic plywood in the parallel direction, and between Chilean OSB and domestic plywood in the perpendicular direction. The shear failure was observed in all tested OSB panels, whereas shear failure, glue line delamination, and bending combined with shear failure were observed in the domestic plywood.

Development of a Rice Circulating Concurrent-flow Dryer(III) - Performance Evaluation of 12-ton Capacity Dryer - (순환식 병류형 곡물건조기 개발(III) - 12톤 용량 건조기 성능평가 -)

  • Han, Jae-Woong
    • Journal of Biosystems Engineering
    • /
    • v.34 no.5
    • /
    • pp.358-362
    • /
    • 2009
  • This study was conducted to evaluate the performance of a 12 tons capacity circulating concurrent flow rice dryer. An actual scale dryer with the capacity of 12 tons was developed to obtain a faster drying rate of 0.8~1.2%(w.b.)/h, while maintaining a lower drying energy consumption of 5,000 kJ/kg-water and achieving a drying quality that was comparable to a conventional cross-flow rice dryer. The Test-1 was conducted at $110^{\circ}C\;-\;20\;cmm/m^2$ and the Test-2 was conducted at $120-110-100-90^{\circ}C\;-\;20\;cmm/m^2$ under the same conditions as Test-1. In Test-1, the drying rate, drying energy consumption and crack ratio were 0.98 %(w.b.)/h, 4,573 kJ/kg-water and 3.2%, respectively. In Test-2, the drying rate, drying energy consumption and crack ratio were 0.74 %(w.b.)/h, 4,790 kJ/kg-water and 4.0%, respectively. The results of these tests demonstrated that this concurrent-flow dryer reached the desired drying rate, drying energy consumption and crack ratio.

A Study on the Learning Effect of Computer Assisted Instruction (CAI) in the Home Economics Class of Middle School (컴퓨터 보조 수업 (CAI)의 학습효과에 관한 연구 -중학교 가정과 디자인의 선택 단원을 중심으로)

  • 윤지현;신상옥
    • Journal of Korean Home Economics Education Association
    • /
    • v.5 no.1
    • /
    • pp.143-152
    • /
    • 1993
  • The purposes of this study were to compare the learning effects of CAI and traditional instruction method in the Home Economics class of middle school and to examine the difference of learning effect between CAI group and traditional instruction group according to ability level. The research findings are as follows: 1.$\circled1$As a result of the post test, CAI group showed significantly higher scores on academic achievement than those of traditional instruction group(p<.05). $\circled2$As a result of the retention test, CAI group showed higher scores than those of traditional instruction group, but statistically the difference is not so significant. 2. $\circled1$Higher group in pre-test score of CAI group showed higher scores in post-test and retention test than those of traditional instruction group, but statistically the difference is not so significant. $\circled2$Lower group in pretest score of CAI group showed significantly higher academic achievements than those of traditional instruction group(p<.05). $\circled3$Higher group in IQ test score of CAI group did not show significantly higher academic achievements than those of traditional instruction group. $\circled4$Lower group in IQ test score of CAI group showed significantly higher academic achievements than those of traditional instruction group(p<.05)

  • PDF

A study on the relationship of lumbar extensor muscle power and static spinal loaded test for old female patients with lumbar degenerative kyphosis (요추후만증을 가진 여자 노인 환자의 정적 척추부하 검사와 허리신전근력과의 관계)

  • Kim, Sung-Ho;Kim, Myung-Joon
    • The Journal of Korean Academy of Orthopedic Manual Physical Therapy
    • /
    • v.9 no.1
    • /
    • pp.29-38
    • /
    • 2003
  • The purpose of this study was to investigate relationship of lumbar extensor muscle power & spinal column curve for old female patients with LDK(Lumbar degenerative kyphosis). Subjects were composed of 37 old female with LDK. The subjects were tested in their spinal segment movement and spinal column curve with Spinal-$Mouse^{\leq}$ in $1^{st}$ loaded test and $2^{nd}$ loaded test and then tested lumbar extensor muscle power with $Medx^{\leq}$ lumbar extension machine. The results of this study, were as follow; There were statistically significant difference $1^{st}$ loaded test and $2^{nd}$ loaded test in upright position increase spinal column forwardly(p<0.01) and decrease lumbar lordosis angle(p<0.01), but no statistically significant difference $1^{st}$ loaded test and $2^{nd}$ loaded test thoracic and hip & sacrum curve angle. Their lumbar extensor muscle poser is very weakness, 61.4% of normal people.

  • PDF

A study on the clinical usefulness, validity, and test-retest reliability of the Spirokit, a device that combines the pulmonary function test and respiratory muscle strength test

  • Kim, Byeong-Soo;Lee, Myung-Mo
    • Physical Therapy Rehabilitation Science
    • /
    • v.9 no.2
    • /
    • pp.120-130
    • /
    • 2020
  • Objective: This study was conducted to identify the clinical usefulness, validity, and reliability of the Spirokit, a device that combines the pulmonary function test (PFT) and respiratory muscle strength (RMS) test. Design: Cross-sectional study. Methods: Forty young adults (male: 23, female: 17) participated in a PFT and a RMS test. The concurrent validity for pulmonary function was assessed by comparing data obtained from MicroQuark and the Spirokit and the agreements between the MicroRPM and the Spirokit for RMS were compared. The test-retest reliability of the Spirokit was determined by comparing data obtained from the first and second sessions. The test and retest were performed at the same time after one day for the PFT and RMS test. Validity was estimated using intraclass correlation coefficients (ICCs), and by calculating 95% limits of agreement (LoA). To estimate interrater reliability, ICCs were calculated. Results: The Spirokit showed a high agreement intra class coefficient (ICC [2, 1]): 0.978-0.999, 95% limits of agreements (95% LOA): -0.798 to 0.847 with MicroQuark. It also showed a high level of concordance ICC (2, 1): 0.992 to 0.993, 95% LOA: -9.313 to 11.169 with MicroRPM. The test-retest reliability of the Spirokit was analyzed using ICC (2, 1), and showed a high level of reliability (ICC [2,1]=0.960 to 0.998). Standard error of measurement % (SEM%) was 0.12% to 3.39%, and minimum detectable change% (MDC%) was 0.02% to 3.79%, indicating high level of reliability. Conclusions: The Spirokit is a device with high validity and reliability that can be used to simultaneously measure PFT and RMS tests.

Factors Related to Quit-Smoking Plan in Smoking Seniors (흡연 노인의 금연계획 영향 요인)

  • Park, Min Hee;Choi, Hye Young
    • Journal of Korean Public Health Nursing
    • /
    • v.35 no.1
    • /
    • pp.60-71
    • /
    • 2021
  • Purpose: This study examined the socio-demographic and health factors affecting the quit-smoking plan in smoking seniors. Methods: Data were obtained from the Seventh Korean National Health and Nutrition Examination Survey (VII-1, VII-2, VII-3). The sample consisted of 369 smoking seniors. The complex sample was analyzed thought an independent t-test, Chi-square test, and multiple logistic regression. Results: The influential factors on the quit-smoking plan were daily smoking (OR=0.30, CI=0.11-0.78), age of start smoking (OR=1.06, CI=1.01-1.11), daily smoking amount (OR=0.95, CI=0.90-1.00), quit-smoking trial (OR=2.63, CI=1.32-5.23), and cognitive stress (OR=2.13, CI=1.01-4.54). Conclusion: This study revealed the variables that should be considered when setting up a smoking cessation plan for smoking seniors. Based on this, an elderly cessation intervention program can be developed.

Analysis of the Effect of Fog Cooling during Daytime and Heat Pump Cooling at Night on Greenhouse Environment and Planst in Summer (하절기 주간 포그 냉방과 야간 히트펌프 냉방이 온실 환경 및 작물에 미치는 영향 분석)

  • Lee, Taeseok;Kim, Jingu;Park, Seokho;Lee, Choungkeun
    • Journal of Bio-Environment Control
    • /
    • v.30 no.4
    • /
    • pp.328-334
    • /
    • 2021
  • This study was conducted to analyze the effect of fog cooling during daytime and heatpump cooling at night in greenhouses in summer. During daytime, the average temp. and RH of the control greenhouse which had shading screen were 32.1℃ and 59.4%. and the average temp. and RH of the test greenhouse which had fog cooling were 30.0℃ and 74.3%. At this time, the average outside temp. and RH were 31.4℃ and 57.7%. So, the temp. of the control was 0.7℃ higher than outside temp., but the temp. of the test was 1.4℃ lower than outside and 2.1℃ lower than control. The average RH was 74.3% in the test and 59.4% in control. The average temp. and RH of the control greenhouse which had natural ventilation at night were 25.2℃ and 85.1%, and the average temp. and RH of the test greenhouse which had heat pump cooling were 23.4℃, 82.4%. The average outside temp. and RH at night were 24.4℃ and 88.2%. The temp. of the control was 0.8℃ higher than outside temp., but the temp. of the test was 1.0℃ lower than outside and 1.8℃ lower than control. The average RH was 82.4% in test and 85.1% in control greenhouse. There was no significant difference between the plants growth eight weeks after planting. But after the cooling treatment, the values of stem diameter, plant height, chlorophyll in test were higher than control. The total yield was 81.3kg in test, 73.8kg in control, so yield of test was 10.2% higher than control. As a result of economic analysis, 142,166 won in profits occurred in control greenhouse, but 28,727 won in losses occurred in test greenhouse, indicating that cooling treatment was less economical.

Behavior of Juvenile Black Sea Bass, Centropristis striata (Linnaeus) on Oyster Reefs (Oyster reef에서 black sea bass, Centropristis striata 치어의 행동)

  • Gwak, Woo-Seok
    • Korean Journal of Ichthyology
    • /
    • v.20 no.3
    • /
    • pp.173-178
    • /
    • 2008
  • The substrate preferences of juvenile black sea bass Centropristis striata (Linnaeus) was tested in a circular tank (1.5 m diameter${\times}$0.4 m deep) divided into two equal areas of oyster-related (oyster reef and whole oyster shell) and sand substrates. All trials were video taped for 20 min. Tapes were viewed on a monitor and locations of all fish recorded and timed with respect to substrate. $Mean{\pm}SE$ times on oyster shell were $18.1{\pm}2.0min$ (1-fish trial-1) and $17.5{\pm}1.7min$ (5-fish trial-1). $Mean{\pm}SE$ times on sand were $2.0{\pm}1.0min$ (1-fish trial-1) and $2.5{\pm}1.7min$ (5-fish trial-1). Black sea bass juveniles showed a significant preference for oyster reef and shell over sand substrate in single-fish trials (paired t-test, P<0.05) and also in five-fish trials (paired t-test, P<0.05). $Mean{\pm}SE$ times under oyster reefs were $16.6{\pm}2.0min$ in single-fish trials and $10.7{\pm}2.3min$ in five-fish trials. Mean numbers of movements among oyster reefs were $1.1{\pm}1.0$ in single-fish trials and $11.5{\pm}3.1$ in fivefish trials. Fish spent significantly less time under oyster reefs in five-fish trials, compared to single-fish trials (paired t-test, P<0.05) and they moved more frequently in five-fish trials than in single-fish trials (paired t-test, P<0.05). Significantly higher competition for a refuge in five-fish trials may induce less time under oyster reefs as well as frequent movement of black sea bass juveniles on shell substrate.

Fit Testing for Respirators and Development of Fit Test Panels for Koreans (호흡기보호구의 밀착도 검사와 안면규격 Panel의 개발)

  • Han, Don-Hee
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.9 no.1
    • /
    • pp.1-13
    • /
    • 1999
  • Even though there is no fit test regulations in Korea, in many developed countries, respirator fit testing is required before entering specific work environment to ensure that the respirator worn satisfies a minimum of fit and that the user knows when the respirator fits properly. Due to no regulation for fit test, a lot of Korean workers wearing respirators may be potentially exposed to hazards. Anthropometric test panels for testing the fit of respirators are very important to develop respirators fitted properly for Korean workers. To evaluate the fitting performance, 304 workers (272 males, 32 females) and 536 students (268 male, 268 females) were fit tested for 4 full-facepieces (2 domestic-made S, C, and 2 foreign-made T, N), 2 half masks (1 domestic-made S, and 1 foreign-made T) and 3 quarter masks (2 domestic-made S, C, and 1 foreign-made T) with PortaCount 8020. Fit factors of foreign-made masks were higher than those of domestic-made masks in all types. Males were fitted more properly than females. A facial dimension survey of 364 workers (339 males, 25 females) and 158 students (69 males, 89 females) was conducted to develop test panels for fit testing. Subjects were selected on the basis of face length and face width to wear full-facepiece masks in test. For testing half- and quarter masks, face length and lip length were used. Test panels containing 25 male-and-female subjects and 16 male subjects were respectively developed for full-facepiece, and half-and quarter masks to represent a majority of population surveyed.

  • PDF