• Title/Summary/Keyword: Test 1.1 & 2.1

Search Result 37,585, Processing Time 0.068 seconds

산란계 밀집지역에서 혈구응집억제반응과 효소면역측정법을 이용한 가금인플루엔자 혈중항체가의 비교 조사 (Comparative study on avian influenza virus antibody titer by hemagglutination inhibition test and enzyme-linked immunosorbent assay in the mass zone layer)

  • 이정원;엄성심;이성재;서이원;서석열;정동석;송희종
    • 한국동물위생학회지
    • /
    • 제27권1호
    • /
    • pp.81-87
    • /
    • 2004
  • This study was conducted to investigate the similarity between hemagglutination inhibition (HI) test and enzyme-linked immunosorbent assay(ELISA), the HI titer and mean ratio S/P ratio) of avian influenza virus. To perform this study, the 1,457 sera of layers 21 farms in May, July and September, respectively. As a result of HI test, positive rates were 480 to 422 (92.1%) in May, 494 to 394(79.8%) in July and 483 to 402(83.2%) in September, and the mean antibody titer were 4.6, 4.3, 4.0 to 0.3 decreased, respectively. The positive rates by ELISA, 480 to 475(99.0%) in May, 494 to 485(98.2%) in July, 483 to 472(97.7%) in September, and the mean S/P ratio were 2.319, 2.557 and 2.380, respectively. The result of HI test and ELISA positive 480 to 422(92.1%), 475(99.0%), 494 to 394(79.8%), 485(98.2%) and 483 to 402(83.2%), 472(97.7%). Therefore, ELISA was shown more sensitive compare the HI titers.

마찰용접에 의한 드릴 생산에서의 AE에 의한 실시간 품질평가에 관한 연구 (Study on Real-Time Weld Quality Evaluation by Acoustic Emission for Production of Drills by Friction Weldiing)

  • 오세규;윤인진;오정환;오명석
    • 한국해양공학회지
    • /
    • 제7권2호
    • /
    • pp.121-130
    • /
    • 1993
  • A study off riction welding of high speed steel(SKH 51) bar for blade side to carbon steel(STC 3)bar for shank side was carried out experimentally through tensile test, hardness test, microstructure, and acoustic emission (AE) test. So, this paper deals with optimizing the welding conditions and the real-time quality (strength) evaluation of friction weleded joints by acoustic emission technique. The results obtained are summarized as follows: (1) For friction welded joints of SKH 51to STC 3 steel bars, the total upset (U) increases linearly with an increase of heating time (t sub(1)). (2) The determined optimum welding conditions are heating time (t sub(1)) 7-9 sec, upsetting time (t sub(2)) 5 sec, heating pressure(P sub(1)) 12 kg sub(f)mm supper(2), upsetting pressure (P sub(2)) 15 kg sub(f) mm supper(2) and rotating speed (n) 2, 000 rpm, resulting in a computed relationship between the tensile strength of the joint .sigma. (kg sub(f) mm supper(2)) and the heating time t sub(1) (sec) as the following. sigma.=2.39t sub(1)

  • PDF

A study on the perception of occupational therapy majors on Cognitive Impairment Screening Test (CIST)

  • Lee, Sun-myung;Chae, Joo-hyun;Sung, I-sul;Lee, Soo-jin;Moon, Soo-bin;Park, Da-hee;Park, So-hyun
    • 한국임상보건과학회지
    • /
    • 제9권2호
    • /
    • pp.1493-1501
    • /
    • 2021
  • Purpose: The purpose of this study is to classify the characteristics of each item of CIST evaluation and to find out the degree of recognition of the characteristics of the cognitive tool. Methods: This study was conducted for occupational therapy majors at M University located in Gyeongsangnam-do. The data collection from May to June 2021. Total of 25 copies of the data were finally analyzed, SPSS Statistics 26 was used for data analysis. Results: As a result of the study, the significance level was visual reasoning 1 test strip and the visual reasoning 1 tool. In the relationship between the correspondence 1 figure simulation sheet and the figure simulation tool for each item and statistically significant, and the correspondence 2 visual reasoning 2 sheet. Visual reasoning 2 sheet and visual reasoning tool also showed that was found to be statistically significant. The correlation for visual reasoning 1 sheet and the visual reasoning 1 tool, reasoning 2 tool and visual reasoning 1 sheet, and the visual reasoning 2 tool and the verbal reasoning sheet. Conclusion: In this study, in the CIST items that may be difficult, it is better to attach the actual tool rather than the verbal explanation of the test paper to increase the efficiency of the test and the understanding of subjects with mild cognitive impairment. It was implemented by applying the tool, and it was found that the use of the tool in the visual reasoning item showed a high correlation by item. Furthermore, based on this study, it will be possible to suggest a method to control the difficulty of each subject of the cognitive evaluation tool, and to prepare a standard for future research.

진돗개에서 개적혈구항원(dog erythrocyte antigen) 1 혈액형 조사 (Prevalence of dog erythrocyte antigen (DEA) 1 among Jindo dogs)

  • 이정치
    • 한국동물위생학회지
    • /
    • 제41권4호
    • /
    • pp.271-276
    • /
    • 2018
  • This study was conducted to investigate the prevalence of dog erythrocyte antigen (DEA) 1 with DEA 1.1 and DEA 1.2 on 122 Jindo dogs (29 males, 93 females) from 2014 to 2015 using a monoclonal antibody card kit (blood typing card kit, Korea Animal Blood Bank Inc., South Korea). Among the tested dogs, 14.8% (18/122) were positive for the DEA 1.1 antigen and 85.2% (104/122) were positive for the DEA 1.2 antigen. The prevalence of positive types for the DEA 1.2 antigen was significantly higher than the DEA 1.1 antigen (P<0.01). The prevalence of positive types for the DEA 1.1 antigen was higher in white-haired Jindo dogs than yellow-haired dogs (P<0.05). However, there was no gender difference in the prevalence of the DEA 1.1 antigen (P=0.665). The incidence of sensitization after the first transfusion without blood group test was 12.6% and the incidence of acute hemolytic transfusion reaction after the second transfusion in the same immunized dogs was 1.6%. Therefore, the blood group test for the DEA 1 antigen should be performed for Jindo dogs to ensure safe and effective transfusion therapy and further studies remain to be conducted for other DEAs among Jindo dogs.

200 N급 GCH4/LOx 소형로켓엔진의 형상설계와 성능시험평가 (Part I: 예비설계와 시험장치) (Configuration Design, Hot-firing Test and Performance Evaluation of 200 N-Class GCH4/LOx Small Rocket Engine (Part I: A Preliminary Design and Test Apparatus))

  • 김영진;김민철;김정수
    • 한국추진공학회지
    • /
    • 제24권1호
    • /
    • pp.1-8
    • /
    • 2020
  • 메탄/산소 이원추진제 소형로켓엔진의 성능평가를 위한 형상설계 및 시험평가시스템을 구축하였다. 인젝터는 추진제 미립화 성능이 우수하고, 연소불안정성이 적은 스월 동축형(swirl-coaxial) 방식을 채택하였다. 연소효율 비교를 위해 연소실의 종횡비는 1.5, 1.8, 2.1로 각각 설정하였다. 그리고 정밀추력측정장치의 측정 신뢰성을 높이기 위해 pre/post calibration을 실시하였다. 그 결과, 예비 지상연소시험에서 추력과 비추력은 89.2 N, 181.8 s로 78.4%의 효율을 가지고, 특성속도는 84.2%의 효율을 갖는 것이 확인되었다.

An ionic liquid incorporated gel polymer electrolyte for double layer capacitors

  • Perera, Kumudu S.;Prasadini, K.W.;Vidanapathirana, Kamal P.
    • Advances in Energy Research
    • /
    • 제7권1호
    • /
    • pp.21-34
    • /
    • 2020
  • Energy storage devices have received a keen interest throughout the world due to high power consumption. A large number of research activities are being conducted on electrochemical double layer capacitors (EDLCs) because of their high power density and higher energy density. In the present study, an EDLC was fabricated using natural graphite based electrodes and ionic liquid (IL) based gel polymer electrolyte (GPE). The IL based GPE was prepared using the IL, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate (1E3MITF) with the polymer poly(vinyl chloride) (PVC) and the salt magnesium trifluoromethanesulfonate (Mg(CF3SO3)2 - MgTF). GPE was characterized by electrochemical impedance spectroscopy (EIS), DC polarization test, linear sweep voltammetry (LSV) test and cyclic voltammetry (CV) test. The maximum room temperature conductivity of the sample was 1.64 × 10-4 Scm-1. The electrolyte was purely an ionic conductor and the anionic contribution was prominent. Fabricated EDLC was characterized by EIS, CV and galvanostatic charge discharge (GCD) tests. CV test of the EDLC exhibits a single electrode specific capacitance of 1.44 Fg-1 initially and GCD test gives 0.83 Fg-1 as initial single electrode specific discharge capacitance. Moreover, a good stability was observed for prolonged cycling and the device can be used for applications with further modifications.

차세대전동차 진동시험 결과 및 고찰 (Vibration Test Result and Consideration for AUTS(Advanced Urban Transit System)

  • 홍재성;김길동;이장무;원종운;이안호;성창원
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.2276-2279
    • /
    • 2011
  • The AUTS(Advanced Urban Transit System) are developed by government R&D business. This units are under main line performance test in Daebul test line. Both AC and DC could apply to the AUTS for pantagraph voltage. So main transformer and some high voltage filters are added to the under-frame. As a result the total weight of each car(Mc1-Tp1-M-T-Tp2-Mc2) is different. And axle load is different each other. The main characteristics of AUTS(Advanced Urban Transit System) are as follows. One inverter control one motor, DDM(Dircet Drive Motor), no driving gear, plug no end door, self-steering bogie etc. These matters could be appeared to strange vibration. So vibration test is important. The vibration test performed to Mc1 and Tp1. The results were checked to the up-down direction and left-right direction for acceleration.

  • PDF

혈소판 농축 혈장과 혼합된 합성골 및 이종골 이식재가 치주 조직의 재생에 미치는 효과 (A Comparative Study of the effects of Synthetic and Xenogenic Bone grafts with PRP (Platelet Rich Plasma) technique on Periodontal Regeneration)

  • 김영주;임성빈;정진형
    • Journal of Periodontal and Implant Science
    • /
    • 제31권4호
    • /
    • pp.737-747
    • /
    • 2001
  • Regeneration of Periodontium with PRP does not only improve regeneration rate and density of bone but have a possibility to estimate faster healing process for soft tissue. And also, synthetic bone and xenogenic bone graft are effective on regeneration of periodontium. The purpose of this study is to evaluate the effectiveness of synthetic bone ($Biogran^{(R)}$) and xenogenic bone ($BBP^{(R)}$) grafts with the PRP technique on regeneration of periodontium. 52 Generally healthy Pt. who had pocket depth 5mm at any of 6 surfaces of the teeth were in the study at Dept. of Perio. in Dankook Dental Hospital. Open Flap was treated for 18 infra-bony pockets as control group, $Biogran^{(R)}$ with PRP was inserted for 25 infrabony pockets as first test group, and $BBP^{(R)}$ with PRP was inserted for 22 infrabony pockets as 2nd test group. Then evaluation was made after 3 and 6 months 1. 6 months after surgery, each difference of average probing pocket depth was $2.61{\pm}0.23$ for control, $3.40{\pm}0.30$ for 1st test, and $3.45{\pm}0.37$ for 2nd test group. 2. 6 months after surgery, each difference of clinical probing attachment level was $1.39{\pm}0.12$ for control, $2.88{\pm}0,24$ for 1st, and $2.86{\pm}0,27$ for 2nd test group. 3. 6 months after surgery, each difference of Maximal probing attachment level was $1.11{\pm}0.16$ for control, $3.28{\pm}0.30$ for 1st, and $3.27{\pm}0.35$ for 2nd test group. 4. There were significant differences for clinical change of each three group which were between average probing pocket depth and clinical attachment level of 3,6 months and minimal and maximal attachment level after 6 months 5. There were significant differences for average probing pocket depth which were only at control group and 2nd test group between 1 and 6months. For clinical attachment level and minimal and maximal proving attachment level, there was a significant difference after 6month of surgery. 6. There was no significant difference between two test groups for average probing depth, clinical attachment level, and minima1 and maximal probing attachment level. As the result, PRP with bone graft is very effective for regeneration of periodontium and there is no difference between xenogenic bone and synthetic bone.

  • PDF

Prediction of dynamic behavior of full-scale slope based on the reduced scale 1 g shaking table test

  • Jin, Yong;Kim, Daehyeon;Jeong, Sugeun;Park, Kyungho
    • Geomechanics and Engineering
    • /
    • 제31권4호
    • /
    • pp.423-437
    • /
    • 2022
  • The objective of the study is to evaluate the feasibility of the dynamic behavior of slope through both 1 g shaking table test and numerical analysis. Accelerometers were installed in the slope model with different types of seismic waves. The numerical analysis (ABAQUS and DEEPSOIL) was used to simulate 1 g shaking table test at infinite boundary. Similar Acceleration-time history, Spectral acceleration (SA) and Spectral acceleration amplification factor (Fa) were obtained, which verified the feasibility of modeling using ABAQUS and DEEPSOIL under the same size. The influence of the size (1, 2, 5, 10 and 20 times larger than that used in the 1 g shaking table test) of the model used in the numerical analysis were extensively investigated. According to the similitude law, ABAQUS was used to analyze the dynamic behavior of large-scale slope model. The 5% Damping Spectral acceleration (SA) and Spectral acceleration amplification factor (Fa) at the same proportional positions were compared. Based on the comparison of numerical analyses and 1 g shaking table tests, it was found that the 1 g shaking table test result can be utilized to predict the dynamic behavior of the real scale slope through numerical analysis.

리브조직의 특성을 고려한 니트 패턴 연구(2) -$2{\times}1$ rib 조직과 $2{\times}2$ rib 조직을 중심으로- (A Study on the Knit Pattern Considering the Characteristics of Rib Stitch(2) -Focused on $2{\times}1\;and\;2{\times}2$ Rib Stitches)

  • 김수아;서미아
    • 복식문화연구
    • /
    • 제13권1호
    • /
    • pp.47-59
    • /
    • 2005
  • This study aims to measure stretch rate of standard weight in the $2{\times}1$ rib stitch and $2{\times}2$ rib stitch, and to apply features of rib stitch to the knit pattern. The reviewer examined the sample knit for test with 100% wool, $2/48's{\times}2$, 12 gauge, and then made knit patterns and sample clothes for test considering stretch rate of standard weight of 10gf, 15gf, 20gf, 25gf based on the results from the former test, and finally estimated the try-outs for sample clothes. This study came out with the following results: From the functional estimate of knit patterns made by standard stretch rate of each stitch, the 20gf weight sample clothes of $2{\times}1$ and $2{\times}2$ rib stitchs were in high estimate. For the bust, B/4~ -4.6cm knit pattern was made of $2{\times}1$ rib stitch, B/4~5.3cm of $2{\times}2$ rib stitch. In conclusion, because $2{\times}1$ and $2{\times}2$ rib stitchs has the much higher stretch rate in the direction of the course than $0{\times}0$ ad $1{\times}1$ rib stitchs, high stretch rate of standard weight should be applied to the case of making knit wear. It is expected that this will lead stable sizing and measurement system when used in making knit patterns, and satisfy knit wearers' various needs.

  • PDF