• 한국학교수학회논문집
• /
• 제15권2호
• /
• pp.281-297
• /
• 2012

수학과 평가는 학생들의 수학적 사고력과 성취도를 측정하는데 있다. 또한 이를 분석 활용하여 수학교육의 질을 높이는데 그 목적이 있다. 이러한 평가는 좋은 문항제작에서부터 시작된다. 이에 본고는 문항제작 관련 이론을 고찰하고, 교육목표에 따른 예시 문항과 문항제작시의 유의점을 살펴보며, 계획 단계, 초안 문항제작 단계, 검토 단계, 최종 문항제작 단계 등 단계별 문항제작의 실제를 안내하고자 한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제5권1호
• /
• pp.46-56
• /
• 2004

The verification and improvement of the measurement uncertainty have beenperformed in the altitude test facility for small gas turbine engines, which was built atthe Korea Aerospace Research Institute (KARI) in October 1999. This test is performedwith a single spool turbojet engine at several flight conditions. This paper discussesthe evaluation and validation process for the measurement uncertainty improvements usedin the altitude test facility. The evaluation process, defined as tests before the facilitymodification, shows that the major contnbutors to the measurement uncertainty are theflow meter discharge coefficient, the inlet static and total pressures, the cell pressureand the fuel flow rate. The measurement uncertainty is focused on the primary parametersof the engine performance such as airflow rate, thrust and specific fuel consumption (SFC).The validation process, defined as tests after the facility modification, shows that themeasurement uncertainty, in seal level condition, is tmproved to the acceptable level throughthe facility modification. In altitude test conditions, the measurement uncertainties arenot improved as much as the uncertainty in sea level condition.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.9-14
• /
• 2012

The objectives of this study were to compare the results of HSL (Health and Safety Laboratory) ramp test with perceived sense of slip onto the several different floor surfaces under contaminated conditions. There are a variety of approaches from biomechanical measurements to psychophysical test and human perception. However, controversies over these approaches still remain. Some widely accepted methods need to be improved. AHP (Analytic Hierarchy Process) was used to evaluate the perception of slipperiness of seven different floor surfaces under the contaminated condition with glycerol solution. Twelve subjects worn same footwear and walked with self-selected step and cadence along the test floors. The angle of inclination obtained for water wet condition using 5 l/min with HSL ramp test was compared to perception of slipperiness. The surface roughness ($R_z$) related very well both AHP (r=0.95) and ramp test (r=0.92). The high significant correlation (r=0.90) was found between AHP and HSL ramp test.The HSL ramp test values (Coefficient of Friction, COF) according to subjective evaluation were divided into two categories. There were high correlations between test results (subjective evaluation, HSL ramp test) and surface roughness in Rz. Perception rating obtained with AHP showed a high correlation with COF obtained with HSL ramp test.

• 대한안전경영과학회지
• /
• 제16권2호
• /
• pp.31-42
• /
• 2014

As weapon systems become complex in terms of the scale and functionality, the required time to complete the test and evaluation (T&E) process is inevitably getting longer. However, nowadays the reduction of T&E period becomes one of the core targets in the weapon systems acquisition programs. This is because the reduced time for T&E process can yield the reduction of defense budget and also faster deployment of the weapon systems, thereby having a competitive edge over rival countries. On the other hand, in weapon systems development the management of reliability, availability, maintainability and safety (RAMS), and risk is considered important to keep competitiveness and thus has been carried out separately. Thus, the objective of this paper is to study on improving the T&E process by integrating the RAMS and risk management process in it. To do so, the related processes are analyzed and modeled first. Then an integrated process model is developed. The resulting model is equipped with the traceability among the data and interfaces that are generated from the T&E and RAMS/risk processes. As a case study, the model developed is applied in tanks development. The effective use of the traceability is expected to reduce the time and cost required to complete T&E process.

• 정보처리학회논문지D
• /
• 제14D권6호
• /
• pp.657-664
• /
• 2007

URC(Ubiquitous Robotic Companion)이라는 개념은 로봇은 다양한 서비스를 어느 곳에서나 어느 때나 사용자가 제공 받을 수 있도록 네트워크 기반으로한 로봇 시스템을 일컫는다. 이는 로봇에 네트워크를 활용하여 로봇이 제공할 수 있는 응용서비스를 확장하고 로봇이 모든 기능을 자체적으로 가짐으로써 안게 되는 기술적, 비용적 문제를 네트워크를 통해 기능을 분담하는 것이다. URC 소프트웨어 컴포넌트는 크게 HRI, 로봇액션 등으로 구분되는데 본 논문에서는 URC 컴포넌트의 시험평가를 위하여 품질모델 분석과 컴포넌트 시험 성능 평가 기준서를 설계한다. 또한 품질 프로세스 정의, 테스트케이스 설계 및 URC 컴포넌트 테스팅과 평가 사례를 제안한다.

• International Journal of Costume and Fashion
• /
• 제11권1호
• /
• pp.35-52
• /
• 2011

The purpose of this study is to identify the effects of college students' relationship status on their clothing behavior and purchasing process. The subjects of this study were college students. After a survey, 113 questionnaires were used for the data analysis excluding incomplete ones. Factor analysis, paired t-test, Pearson's correlation, one-way ANOVA, MANOVA and Chi-square test were conducted. The data analysis found that female students had higher levels of clothing interest, and fashion-seeking, impulse buying and individuality-seeking motives than male students. Female students who had boyfriends showed particularly higher levels of fashion-seeking and impulse-buying motives. Throughout the clothing purchase process stages, students were most influenced by girlfriend/boyfriend, especially in the evaluation stage. Students who had girlfriends/boyfriends were significantly more influenced by them. Female students were more influenced by parents at the evaluation stage and their female friends at the information search stage.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권1호
• /
• pp.87-94
• /
• 2001

Filament winding process is a comparatively simple operation in which continuous reinforcements in the form of roving are wound over a rotating mandrel. And now it is well established as a versatile method for storage tanks and pipe for the chemical and other industries. In this study, tensile strength of a filament wound ring specimens were evaluated by split disk test fixture and dress disk test fixture. The results obtained from experiments were compared with the theoretical values obtained by the rule of mixture. And the purpose of this paper is to suggest an appropriate test method for the evaluation of tensile properties of filament wound structures. The tensile strength of a ring specimens tested by the dress disk test showed better agreement with the theoretical values than of a ring specimen tested by the split disk test because the stress concentration in edges of s split disk test fixture is more severe than the that of dress disk test fixture. The results showed that the tensile strength of a ring specimen was influenced by the geometry of test fixture, the continuity of fibers, fiber-tension, fiber-end and stress concentration in specimen.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.15-20
• /
• 2000

Filament winding process is a comparatively simple operation in which continuous reinforcements in the form of roving are wound over a rotating mandrel. And it is now well established as a versatile method for storage tanks and pipe for the chemical and other industries. In this study, tensile strength of a filament wound ring specimens were evaluated by split disk test fixture and dress disk test fixture. The results obtained from experiments were compared with the theoretical values obtained by the rule of mixtures in composites . And the purpose of this paper is the suggestion of an appropriate test method for the evaluation of tensile properties of filament wound structures. The tensile strength of a ring specimen tested by the dress disk test showed better agreement with the theoretical values than that of a ring specimen tested by the split disk test because the stress concentration in edges of a split disk test fixture is more severe than that of dress disk test fixture. The results showed that the tensile strength of a ring specimen was influenced by the geometry of test fixture, the continuity of fibers, fiber-tension, fiber-end and stress concentration in specimen.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.203-207
• /
• 2000

Filament Winding Process is a comparatively simple operation in which continuous reinforcements in the form of roving are wound over a rotating mandrel. And now well established as a versatile method for storage tanks and pipe for the chemical and other industries . In this study, tensile strength of a filament wound ring specimens were evaluated by split disk test fixture and dress disk test fixture , The results obtained from experiments were compared with the theoretical values obtained by the rule of mixtures. And the purpose of this paper is the suggestion of an appropriate test method for the evaluation of tensile properties of filament wound structures .The tensile strength of a ring specimen tested by the dress disk test showed better agreement with the theoretical values than of a ring specimen tested by the split disk test because the stress concentration in edges of a split disk test fixture is more severe than that of dress disk test fixture. The results showed that the tensile strength of a ring specimen was influenced by the geometry of test fixture, the continuity of fibers, fiber-tension, fiber-end and stress concentration in specimen.

• 한국국방경영분석학회지
• /
• 제30권1호
• /
• pp.168-188
• /
• 2004

Integrated Logistic Support (ILS) is a management and technical process whereby all the diverse elements needed to fully operate, maintain, and totally support a materiel system in the field are identified, developed, and deployed simultaneously and on an equal priority with the item of materiel being supported. The test and evaluation (T＆E)of ILS act the important role of reduction of life-cycle cost and keeping of good performance for weapon system. In this article, we suggest the alternatives for improvement in the test and evaluation of ILS during weapon system acquisition. It is hoped that this research is valuable and beneficial to persons related weapon system acquisition, in order to maximize the efficiency of defense acquisition management by reducing the life-cycle cost and enhancing the quality of weapon system.