• 시스템엔지니어링학술지
• /
• 제6권1호
• /
• pp.25-32
• /
• 2010

The Test and Evaluation (T&E) process is an integral part of the Systems Engineering Process. The purpose of Test and Evaluation (T&E) in a system development is to identify the areas of risk to be reduced or eliminated. In this study, when develop aircraft of Civil Aviation with development experience of Military Aircraft, it is that establish Test and Evaluation process. Test and Evaluation for KC-100 small aircraft development can divide to certification test and development test. Certification test is proved compliance about Korea Airworthiness standard (KAS Part 23), through Development Test verify required performance of aircraft. These Test and Evaluation Process is more efficient and optimized.

• 시스템엔지니어링학술지
• /
• 제7권2호
• /
• pp.7-11
• /
• 2011

A high-speed railway system represents a typical example of large-scale multi-disciplinary system, consisting of subsystems such as rolling-stock, electrical hardware, electronics, control, information, communication, civil technology etc. The system design and acquisition data of the large-scale system must be the subject under strict configuration control and management. Systems engineering technology development project for Korea next generation High-speed Electric Multiple Unit (HEMU) system in progress is a national large system development project that is not only a large-size and complex but also multi-disciplinary in nature. Therefore, all stakeholders must understand and share the functional and performance requirements of HEMU throughout its life-cycle phases. Also in the test and evaluation phase, all systems requirements must be verified. In 2011, the prototype train manufacturing will be completed. It will do test run on the commercial line and all systems requirements are verified until 2012. For the system verification, the test and evaluation process have to be established before the test trial run. Using a systems engineering tool, the system design database(SDD) with requirements traceability and development process management in the course of the development have to be established. This paper represents the test and evaluation process development based on the SEMP(Systems Engineering Management Plan) developed in the design stage. The test and evaluation process is refined and updated in comparison to the design stage one. The test and evaluation process consists of procedure, test and evaluation method and schedule. So through this process, it is defined that each systems requirements is verified on which test and about what time.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.157-163
• /
• 2000

Testing evaluation is a part of process for design, production, evaluation, operation and abolition, and is the process of certifying system performance. The main purpose of testing evaluation is to reduce the risk factor under the determining process. Testing process has the three step such as design qualification, integration and validation test in factory, system integration and commissioning test. Design Qualification is to verify errors on the design process. Integration and validation test in factory is for the H/W and S/W of an equipment and is to verify interface of subsystem, communication protocol and main functions. System integration and commissioning test is a functional test to adjust successful installation of equipment. According to the testing process, briefly consideration for test item, test method and test contents about signalling system is carried out.

• 산업공학
• /
• 제23권1호
• /
• pp.78-88
• /
• 2010

In this paper we develop a model for the performance evaluation of defense R&D test development projects based on analytic hierarchy process. First, evaluation indicators are collected through the related literature survey and a delphi inquiry method. Second, stepwise multiple linear regression is used for developing a hierarchical structure for analytic hierarchy process in the evaluation model, which can make the selected evaluation indicators of the hierarchical structure independent. Also we verify the effectiveness of proposed indicators of the performance evaluation by comparing with the existing evaluation indicators. The developed indicators for the performance evaluation is more reasonable and practical than the previous indicators on defense R&D test development projects.

• 시스템엔지니어링학술지
• /
• 제14권2호
• /
• pp.1-7
• /
• 2018

The research and development stage can improve the goal level of the project through systematic operation and management of systems engineering. The test evaluation tasks in the R&D process have a lot of connections with the system engineering in terms of requirement management, and the methodology for deriving the requirements when establishing the test evaluation items has been consistently required. In this paper, we propose the process of effectively establishing and using QFD (Quality Function Deployment), a tool to manage customer requirement, and drawing up HOQ (House of Quality) in the search and exploratory development stage of the self - propelled mortar project.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권2호
• /
• pp.161-172
• /
• 2018

Purpose: Test & Evaluation items are main contents which verify performance of the development system and they are deduced going through project management system stages. However, there is no systematic or standardized framework for Test & Evaluation items, so a lot of differences occur between projects and people are questioning whether verification items are selected for the optimization of the development system. In this regard, this research proposes the process of deducing Test & Evaluation items in a systematic way during a development stage by applying QFD (Quality Function Deployment) technique which reflects customers' requirements. Methods: Test & Evaluation items are recognized as customers' requirements, and QFD technique which refines and gathers various requirements of customers effectively during general products' development stage is applied to complete HOQ (House of Quality) Conclusion: There is no specific methodology for Test & Evaluation items, so currently, they are selected by including items which are given by similar projects or higher authorities. However, by utilizing QFD technique, selection of evaluation items which goes through more systematic process is expected to be possible.

• 안보군사학연구
• /
• 통권8호
• /
• pp.383-420
• /
• 2010

This article is focusing on the improvement of weapon system test & evaluation, aimed at the weapon system in the research development stage. This article suggests improvement directions in three aspects(organization and system, skilled manpower and technology, test facilities of weapon system test & evaluation) as follows. 1) Weapon system test & evaluation organization and system a. Establishment of comprehensive test & evaluation system b. Making regulation for comprehensive test infrastructure management. c. Standardization of test & evaluation process, which can be used in special subject to army, navy and air force. 2) Skilled manpower and technology of weapon system test & evaluation a. Training & education, management of test & evaluation experts. b. Establishment of skill management system of test & evaluation. 3) Test facilities of weapon system test & evaluation a. Establishment of comprehensive improvement direction of test & evaluation installation and equipment. b. Consideration of counter measures to prevent overlapping investment, and to use the test & evaluation resources efficiently. c. Establishment of organic network for the effective use of test & evaluation installation and equipment. d. Establishment of detailed cooperation plan for the commonage of test & evaluation facility and equipment.

• 대한인간공학회지
• /
• 제25권3호
• /
• pp.61-66
• /
• 2006

Awkward work postures in workshop highly affect on work-related musculoskeletal disorders(WMSDs). Especially, in automobiles assembly process, these awkward work postures of workers may cause serious injury and illness. This study is to compare the performance among the evaluation tools which can measure the work-loads caused by the awkward work postures in automobiles assemble process. RULA, REBA and TVAL(Toyota Verification of Assembly Line) are used as the evaluation tools. The 85 jobs selected in the automobiles assembly process are applied to the three tools and their performances are analyzed after the evaluation of the work-load in each job. Through various measures of performance such as statistical test, DUNCAN test, regression test etc., the tendencies and characteristics among them are analyzed in detail.

• Journal of Computing Science and Engineering
• /
• 제2권3호
• /
• pp.274-300
• /
• 2008

Software testing cost can be reduced if the process of testing is automated. However, the test data generation task is still performed mostly by hand although numerous theoretical works have been proposed to automate the process of generating test data and even commercial test data generators appeared on the market. Despite prolific research reports, few attempts have been made to evaluate and characterize those techniques. Therefore, a lot of works have been proposed to automate the process of generating test data. However, there is no overall evaluation and comparison of these techniques. Evaluation and comparison of existing techniques are useful for choosing appropriate approaches for particular applications, and also provide insights into the strengths and weaknesses of current methods. This paper conducts experiments on four representative test data generation techniques and discusses the experimental results. The results of the experiments show that the genetic algorithm (GA)-based test data generation performs the best. However, there are still some weaknesses in the GA-based method. Therefore, we modify the standard GA-based method to cope with these weaknesses. The experiments are carried out to compare the standard GA-based method and two modified versions of the GA-based method.

• 한국군사과학기술학회지
• /
• 제27권3호
• /
• pp.364-374
• /
• 2024

Today, risks created by uncertainty must be managed for successful project execution. From this perspective, applying a risk management process is very important for successful defense systems test works. This paper describes 'the implentation of risk management process for test work' carried out by DTERI's process improvement activities. In this study, the concept of risk management process, and details of the risk management process are examined through PMBOK and ISO/IEC/IEEE 15288, CMMI. After that, we defined 'Standard Process for Risk Management' of defence systems test works. And, we describe 'Risk Management Function' of DTERI's Project Management System(PMS) and the risk management process of DTERI. Finally, the effectiveness of the risk management standard process is verified through quantitative analysis.