• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.528-532
• /
• 1997

X-Ray Angiography has been gold standard or imaging of blood flow. However, patients have to take many risks such as catheterization procedure, iodine contrast agent and ionizing X-rays. MR Angiography has been suggested as a substitute for its non-hazard to patient. But the resolution and contrast was inferior to that of X-ray Angiography. Recently the resolution and the contrast have been much improved due to the development of fast imaging technique.

• The Journal of the Convergence on Culture Technology
• /
• v.3 no.2
• /
• pp.49-54
• /
• 2017

In Korea, partial self-driving feature is added on Genesis G80, Tivoli 2017, and others, and full implementation is under evaluation. Tesla already completed test for full self-driving car, Tesla Model 'X'. Further adoption of self-driving car in market will bring benefits to the elderly and disabled, meanwhile traffic accident will be decreased. However, related regulations for traffic accident with autonomous car including ethical responsibility is not fully established yet. In addition, security and privacy issue of self-driving cars should be improved as well. In this paper, domestic researches and analysis status on autonomous car will be summarized, and proper activation model will be proposed for the previously described issues.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.200-205
• /
• 1999

In the ferromagnetic phase with electrons for La$_{1-x}$(Ca or Sr)$_x$MnO$_3$, films, a remnant resistivity of the order of 10$^{-8}$ ${\omega}$m is observed up to 100 K and increases exponentially with temperature up to T$_c$ and above one Tesla as a function of magnetic field strength (a positive magnetoresistivity). The phase below T$_c$ is regarded as a polaronic state with a polaronic tunneling conduction. Possible p-wave condensation (or superconductor) with a parabolic density of states and the phase separation are discussed on the basis of the two-fold degeneracy of ${\varrho}_{\delta}$ orbitals.

• Progress in Medical Physics
• /
• v.18 no.4
• /
• pp.209-213
• /
• 2007

In this work we have measured the dose distribution and the percent depth dose of 20 MeV electron beam using the X-OMAT films in order to verify the effects of transverse magnetic field on high energy elecrtron beam in a phantom. The result shows about 30% increase of the percent depth dose at 4.5 cm depth under the transverse magnetic field of 1.5 Tesla at 7.5 cm depth. We have verified that these were in an agreement with other theoretical results.

• Journal of Korean Neurosurgical Society
• /
• v.55 no.3
• /
• pp.136-141
• /
• 2014

Objective : The aims of this study are to identify interpersonal differences in defining coordinates and to figure out the degree of distortion of the MRI and compare the accuracy between CT, 1.5-tesla (T) and 3.0T MRI. Methods : We compared coordinates in the CT images defined by 2 neurosurgeons. We also calculated the errors of 1.5T MRI and those of 3.0T. We compared the errors of the 1.5T with those of the 3.0T. In addition, we compared the errors in each sequence and in each axis. Results : The mean difference in the CT images between the two neurosurgeons was $0.48{\pm}0.22mm$. The mean errors of the 1.5T were $1.55{\pm}0.48mm$ (T1), $0.75{\pm}0.38$ (T2), and $1.07{\pm}0.57$ (FLAIR) and those of the 3.0T were $2.35{\pm}0.53$ (T1), $2.18{\pm}0.76$ (T2), and $2.16{\pm}0.77$ (FLAIR). The smallest mean errors out of all the axes were in the x axis : 0.28-0.34 (1.5T) and 0.31-0.52 (3.0T). The smallest errors out of all the MRI sequences were in the T2 : 0.29-0.58 (1.5T) and 0.31-1.85 (3.0T). Conclusion : There was no interpersonal difference in running the Gamma $Plan^{(R)}$ to define coordinates. The errors of the 3.0T were greater than those of the 1.5T, and these errors were not of an acceptable level. The x coordinate error was the smallest and the z coordinate error was the greatest regardless of the MRI sequence. The T2 sequence was the most accurate sequence.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.223-226
• /
• 1997

X-Ray Angiography has been gold standard for imaging of blood flow. However, patients have to take many risks such as catheterization procedure, iodine contrast agent and ionizing X-rays. MR Angiography has been suggested as a substitute for its non-hazard to patient. But the resolution and contrast was inferior to that of X-ray Angiography. Recently the resolution and the contrast have been much improved due to the development of fast imaging technique. Here we report some preliminary results of the MR Angiography we have implemented on 1 Tesla MRI unit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.811-816
• /
• 2006

The single layered magnetic thin films with anisotropic magnetoresistance behavior have advantage on micro integration due to their low cost in manufacturing. Although the conventional MCo (M=Cu, Ag) amorphous ribbons using a rapid solidification process have showed appropriate for magnetic property for bulk devices, they are not appropriate for micro-scale devices due to their brittleness. We prepared the thermal evaporated 100 nm-thick $Cu_{1-x}Co_x\;and\;Ag_{1-x}Co_x(x=0.1{\sim}0.7)$ films on silicon wafers and investigated the magnetic property of the as-depo films such as magnetization and magnetoresistance ratio. We confirmed that the maximum MR ratio of 1.4 and 2.6% at the external field of 0.5 Tesla in $CuCo_{30},\;AgCo_{40}$ films, respectively. Our result implies that AMR may be slightly less than those of the conventional CuCo and AgCo ribbons due to surface scattering, but their AMR ratio be enough for micro-scale application with easy integration compatibility for the process without surface oxidation.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.17-21
• /
• 2005

We report the oscillation of the Josephson vortex-flow resistance in the rectangular stacks of $Bi_{2}Sr_{2}CaCu_{2}O_{8+x}$(Bi-2212) intrinsic Josephson junctions (IJJs). Apiece of Bi-2212 single crystal containing a few tens of IJJs was sandwiched between two gold electrodes and fabricated into a rectangular shape with the typical lateral size of about $1.5{\times}10\;{\mu}m^2$, using e-beam lithography and focused ion-beam etching techniques. In a tesla-range magnetic field applied in parallel with the junction planes, the oscillation of the Josephson vortex flow resistance was observed at temperatures near 60 K. The oscillation results from the interplay between the triangular Josephson vortex lattice and the potential barrier at the boundary of a single crystal. The oscillatory magnetoresistance for different bias currents, external magnetic fields, and the tilt-angles provides useful information on the dynamics of the coupled Josephson-vortex lattice system.

• Journal of Magnetics
• /
• v.13 no.2
• /
• pp.57-60
• /
• 2008

This study examined the effect of various types of epitaxial strain on the magnetic properties of $SrRuO_3$ thin films. Epitaxial $SrTiO_3$ (001), $SrTiO_3$ (110), and $SrTiO_3$ (111) substrates were used to apply different crystal symmetries to the grown films. The films were grown using pulsed laser deposition. The X-ray diffraction patterns of the films grown under optimum conditions showed very clear peaks for the $SrRuO_3$ film and $SrTiO_3$ substrates. The saturated magnetic moment at 5 K after 7 Tesla field cooling was $1.2-1.4\;{\mu}_B$/Ru. The magnetic easy axis for all three types of films was along the surface normal. The magnetic transition temperature for the $SrRuO_3$ film with lower symmetry was slightly larger than the $SrRuO_3$ film with higher symmetry.

• Korean Journal of Materials Research
• /
• v.5 no.4
• /
• pp.433-444
• /
• 1995

BaCe$O_{3}$를 첨가하여 용융공정으로 제조한 단결정형 Y$Ba_{2}$$Cu_{3}$$O_{x}$(1-2-3) 초전도체의 온도에 대한 자화특성을 연구하였다. 고상반응법과 용융공정으로 0에서 30wt% BaCe$O_{3}$를 1-2-3 결정내에 미세 분산시켰다. 초전도체의 자화특성은 VSM(vibrating sample magnetometer)을 사용하여 77K, 60K, 40K와 20K, 2 Tesla 자장범위에서 측정하였다. BaCe$O_{3}$를 첨가하지 않은 겨우나 5wt% BaCe$O_{3}$를 첨가한 1-2-3 결정의 경우, 77K, 외부자장이 증가시 자화율 차이가 증가하는 비정상 자화특성이 관찰된다. 측정온도가 60K에서는 제2차 최대점이 나타나는 자장값이 고자장쪽으로 이동한다. 20K와 40K의 저온에서는 비정상자화특성이 2 T의 자장범위까지 관찰되지 않았다. 15wt%와 20wt% BaCe$O_{3}$첨가한 시편에서는 자장이 증가하면 자화율차이가 단순히 감소한다. Y-Ba-Cu-O의 flux pinning 기구를 BaCe$O_{3}$첨가에 의한 미세조직변화로 설명하였다.