• 센서학회지
• /
• 제33권3호
• /
• pp.152-157
• /
• 2024

In this study, we propose a novel 8T ternary SRAM that can process three logic values (0, 1, and 2) with only two additional transistors, compared with the conventional 6T binary SRAM. The circuit structure consists of positive and negative ternary inverters (PTI and NTI, respectively) with carbon-nanotube field-effect transistors, replacing conventional cross-coupled inverters. In logic '0' or '2,' the proposed SRAM cell operates the same way as conventional binary SRAM. For logic '1,' it works differently as storage nodes on each side retain voltages of V_DD/2 and V_DD, respectively, using the subthreshold current of two additional transistors. By applying the ternary system, the data capacity increases exponentially as the number of cells increases compared with the 6T binary SRAM, and the proposed design has an 18.87% data density improvement. In addition, the Synopsys HSPICE simulation validates the reduction in static power consumption by 71.4% in the array system. In addition, the static noise margins are above 222 mV, ensuring the stability of the cell operation when V_DD is set to 0.9 V.

• 정보과학회지
• /
• 제3권1호
• /
• pp.18-30
• /
• 1985

三値논리는 同一의 情報量을 表現하는데 二値에 비하여 적은수의 記號로 써 達成할 수 있고 演算速度가 빠르다는 특징을 갖고 있다. 그러나 현재로서는 回路素子가 三値論理에 適合한 것이 나와 있지 않고 二値論理만큼 工學的인 接近 이 이루어져 있지 않은 상태이지만 보다 고 속의 情報處理裝置를 構成하기 위해 서 이 分野의 硏究는 價値있는 일이라 하겠다. 三値論理에 對해서는 Post(1),, M hldorf(2) 이래 많은 硏究가 있었다.

• Journal of Applied and Pure Mathematics
• /
• 제6권1_2호
• /
• pp.97-103
• /
• 2024

This study is about digits of numbers in system logic B₃. Any real number is written as digits in the binary system, in the ternary system. The numbers in base two and base three are also written in the B₃ system ternary logic. These two writing methods are transferred into the third method. The real numbers 0,1 and 0, 1, 2 are written as digits. The same real numbers are written as digits of elements of the set -1, 0, 1 in base B₃. The periods here are investigated. The relationship between these digits is analysed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.191-194
• /
• 2009

PtRu based and PtSn based ternary catalysts were prepared by a conventional impregnation method using NaBH4 as reducing agent. The alloy formation, crystalline size and chemical composition of the in-house catalysts were determined by XRD, TEM and EDX, respectively. The chemical compositions of in-house catalysts were quite similar to the nominal value and good alloy formations were also observed. Further, crystalline sizes of ternary catalysts were comparatively smaller than binary catalysts and were approximately 3.5 ~ 5.5 nm. The electrochemical measurements were carried out in the solution 1 M $H_2SO_4$ with 1 M $C_2H_5OH$ at room temperature. LSV results obtained that ternary catalysts were higher current densities and specific activities. Especially, in case of tungsten addition system, Pt5Sn4W/C have the highest specific activities values and was approximately 21.2 and 3.1 times higher than that of PtRu/C and PtSn/C electrocatalyst.

• 폴리머
• /
• 제25권2호
• /
• pp.226-232
• /
• 2001

The properties of poly(ethylene terephthalate) (PET)/maleic anhydride-grafted polypropylene (MAgPP)/poly(styrene-co-maleic anhydride)(PScMA) ternary blend were investigated. The ternary blend was immiscible based on the glass transition temperatures measured by dynamic mechanical analyzer (DMA). The degradation of MAgPP during melt mixing for 30 min at 280$^{\circ}C$ did not affect the properties of the ternary blend. The interaction among the components was confirmed from the rheological properties, which was increased with the PSCMA contents. In terms of the mechanical properties, it was observed to satisfy the mixture rule for a multiple system.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2002년도 춘계학술발표논문집 (하)
• /
• pp.1647-1650
• /
• 2002

In this paper, a class of multi-level spreading codes, i.e., ternary ZCD(zero-correlation duration) spreading codes are introduced. Novel ternary ZCD code sets are generated by carrying out a chip-shift operation of the ternary preferred pairs (TPP) with a ZCD of(0.75N+1)chips. Ternary ZCD codes have superior family size than the binary ZCD codes and they are effective for approximately synchronized (AS) CDMA

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권2호
• /
• pp.41-49
• /
• 2020

상온에서 발생하는 1, 2성분계 무시멘트 콘크리트의 강도저하 문제를 개선하기 위해 시멘트를 실리카 흄, 플라이애시, 고로슬래그 미분말로 치환한 3성분계 무시멘트 콘크리트의 슬럼프와 압축강도 특성을 통해 비교분석을 실시하여 다음과 같은 결론을 얻었다. 3성분계 무시멘트 콘크리트는 2성분계에 비해 높은 압축강도를 나타냈으며 실리카 흄을 10% 혼입한 경우 슬럼프 감소가 적은 것으로 나타났다. 또한, 삼각조성도를 통해 슬럼프 및 압축강도 수준별 각 무기결합재의 적정 구성비율 범위를 제시하였다.

• 인터넷정보학회논문지
• /
• 제12권1호
• /
• pp.27-38
• /
• 2011

본 논문에서는 신체 외부 고속 통신을 위한 UWB-IR(Ultra Wide Band-Impulse Radio)을 알아보고 다중 접속 시 발생하는 간섭을 완화하고 전송 효율을 높이기 위해 MHP(Modified Hermite Polynomial)펄스와 터너리 코드를 이용한 다중접속 기법을 제안한다. 상호 직교성을 가지는 MHP 펄스와 터너리 코드를 이용하여 신호를 전송할 경우, 신체 외부 고속 및 저속 통신에서 다중접속 시 발생하는 다중 사용자 간섭을 완화하고 다중 사용자간의 신호 구분이 가능하다. 신호 심볼구조에서 MHP 펄스와 터너리 코드 그리고 시간도약 구간을 설정하여 동기식과 비동기식 고속전송 그리고 동기식과 비동기식 저속전송의 경우에서 최적의 전송기법을 찾고 검증한다. 시뮬레이션을 통해 동기식 구조에서 MHP 펄스를 이용하여 전송한 경우 가우시안 펄스를 사용한 경우보다 2~3dB 향상됨을 확인하였다. 또한 비동기식 구조에서의 신호충돌을 회피하기 위해 터너리 코드를 사용하여 전송하여 향상된 다중접속 기법을 확인하였다.

• 한국재료학회지
• /
• 제31권5호
• /
• pp.296-300
• /
• 2021

Al-Cr-Si ternary quench ribbons are fabricated using a single roll method and investigated for their structural and thermal properties. In particular, the sinterability is examined by pulse current sintering to obtain the following results. The Al₇₄Cr₂₀Si₆ composition becomes a quasicrystalline single phase; by reducing the amount of Cr, it becomes a two-phase mixed structure of Al phase and quasicrystalline phase. As a result of sintering of Al₇₄Cr₂₀Si₆, Al₇₇Cr₁₃Si₁₀ and Al₉₀Cr₆Si₄ compositions, the sintering density is increased with the large amount of Al phase; the sintering density is the highest in Al₉₀Cr₆Si₄ composition. In addition, as a result of investigating the effects of sintering temperature and pressurization on the sintered density of Al₉₀Cr₆Si₄, a sintered compact of 99% or more at 513 K and 500 MPa is produced. In particular, since the Al-Cr-Si ternary crystal is more thermally stable than the Al-Cr binary quaternary crystal, it is possible to increase the sintering temperature by about 100 K. Therefore, using an alloy of Al₉₀Cr₆Si₄ composition, a sintered compact having a sintered density of 99 % or more at 613 K and 250 MPa can be manufactured. It is possible to increase the sintering temperature by using the alloy system as a ternary system. As a result, it is possible to produce a sintered body with higher density than that possible using the binary system, and at half the pressure compared with the conventional Al-Cr binary system.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.331-332
• /
• 2009

본 연구에서는 고로 슬래그와 잔사회를 사용한 3성분계 시멘트를 제조하여, 시멘트와 콘크리트의 기본 특성을 검토하였다. 시험은 잔사회20%, 정제회20%, 고로슬래그50, 55%를 사용하였고, 특히 시멘트의 미소수화열측정, 콘크리트의 단열온도상승량 시험을 실시하였다.