• 제목/요약/키워드: Ternary electrolyte

검색결과 26건 처리시간 0.025초

Influence of Electrolyte Composition on Electrochemical Performance of Li-S Cells

  • Kim, Tae Jeong;Jeong, Bo Ock;Koh, Jeong Yoon;Kim, Seok;Jung, Yongju
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권5호
    • /
    • pp.1299-1304
    • /
    • 2014
  • The electrochemical performance of Li-S cells was investigated in various ternary electrolyte solutions composed of 1,2-dimethoxyethane (DME), tetra(ethylene glycol) dimethyl ether (TGM), and 1,3-dioxolane (DOX). The discharge capacity values and cycle data obtained at each composition were statistically treated with the Minitab program to obtain mixture contour plots, from which the optimal composition of the ternary solvent systems was predicted. The discharge capacities and capacity retention were quite dependent on the electrolyte composition. It was estimated from the contour plots of the capacity at 1.0 C that the discharge capacity sharply increased with a decrease in the TGM content. High capacities greater than 900 mAh/g at 1.0 C were expected for the electrolyte composition with a volume ratio of DME/TGM/DOX = 1/0/1. In contrast, it was predicted from the mixture contour plot of the capacity retention that the cycle performance would significantly increase with an increase in the DME content.

Investigation on Dissolution and Removal of Adhered LiCl-KCl-UCl3 Salt From Electrodeposited Uranium Dendrites using Deionized Water, Methanol, and Ethanol

  • Killinger, Dimitris Payton;Phongikaroon, Supathorn
    • 방사성폐기물학회지
    • /
    • 제18권4호
    • /
    • pp.549-562
    • /
    • 2020
  • Deionized water, methanol, and ethanol were investigated for their effectiveness at dissolving LiCl-KCl-UCl3 at 25, 35, and 50℃ using inductively coupled plasma mass spectrometry (ICP-MS) to study the concentration evolution of uranium and mass ratio evolutions of lithium and potassium in these solvents. A visualization experiment of the dissolution of the ternary salt in solvents was performed at 25℃ for 2 min to gain further understanding of the reactions. Aforementioned solvents were evaluated for their performance on removing the adhered ternary salt from uranium dendrites that were electrochemically separated in a molten LiCl-KCl-UCl3 electrolyte (500℃) using scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS). Findings indicate that deionized water is best suited for dissolving the ternary salt and removing adhered salt from electrodeposits. The maximum uranium concentrations detected in deionized water, methanol, and ethanol for the different temperature conditions were 8.33, 5.67, 2.79 μg·L-1 for 25℃, 10.62, 5.73, 2.50 μg·L-1 for 35℃, and 11.55, 6.75, and 4.73 μg·L-1 for 50℃. ICP-MS analysis indicates that ethanol did not take up any KCl during dissolutions investigated. SEM-EDS analysis of ethanol washed uranium dendrites confirmed that KCl was still adhered to the surface. Saturation criteria is also proposed and utilized to approximate the state of saturation of the solvents used in the dissolution trials.

Effect of SiO2/B2O3 ratio on Li ion conductivity of a Li2O-B2O3-SiO2 glass electrolyte

  • Kim, Young Han;Yoon, Mi Young;Lee, Eun Jung;Hwang, Hae Jin
    • Journal of Ceramic Processing Research
    • /
    • 제13권spc1호
    • /
    • pp.37-41
    • /
    • 2012
  • A lithium ion conducting borosilicate glass was fabricated by a conventional melt quenching technique from a mixture of Li2CO3, B2O3 and SiO2 powders. The Li ion conductivity of the lithium borosilicate glasses was evaluated in terms of the SiO2/B2O3 ratio. In the Li2O-B2O3-SiO2 ternary glass, the glass forming region decreases with an increasing Li2O content. At the same Li2O, the crystallization tendency of the glass samples increases with the SiO2/B2O3 ratio, resulting in a reduced glass forming region in the Li2O-B2O3-SiO2 ternary glass. The electrical conductivity moderately depends on the SiO2/B2O3 ratio in the Li2O-B2O3-SiO2 ternary glass. The conductivity of the glasses slightly increases with the SiO2/B2O3 ratio. The observed phenomenon can be explained by the modification of the glass structure as a function of the SiO2 content.

Photoelectrochemical Deposition of CdZnSe Thin Films on the Se-Modified Au Electrode

  • Ham, Sun-Young;Jeon, So-Yeon;Lee, Ungki;Paeng, Ki-Jung;Myung, No-Seung
    • Bulletin of the Korean Chemical Society
    • /
    • 제29권5호
    • /
    • pp.939-942
    • /
    • 2008
  • Photoelectrochemical deposition of CdZnSe thin films on the Se-modified Au electrode using electrochemical quartz crystal microgravimetry (EQCM) and voltammetry is described. Corrosion of pre-deposited Se electrodes by illumination at a fixed potential resulted in $Se^{2-}$ species, which was manifest from the EQCM frequency changes. $Se^{2-}$ species generated from the photocorrosion reacted with $Cd^{2+}$ and $Zn^{2+}$ ions in the electrolyte to form CdZnSe films on the Au electrode. The effect of electrolyte composition on the composition and band gap of CdZnSe films was studied in detail. Also, photoelectrochemistry, EDX, Raman spectroscopy were used for the characterization of CdZnSe thin films.

Programmable Metallization Cell에서 칼코게나이드 물질의 열처리에 따른 특성 (Properties on Annealing of Chalcogenide Materials at Programmable Metallization Cell)

  • 최혁;김현구;남기현;구용운;정홍배
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.164-164
    • /
    • 2007
  • Photodiffusion of silver into chalcogenide thin film is one of the most interesting effects that occurs in chalcogenide glass as it theatrically changes the properties of the initial material and forms a ternary. Programmable Metallization Cell(PMC) Randon Access Memory use for photodiffusion of mobile metal is based on the electrochemical growth and removal of nanoscale metallic pathway in thin film of solid electrolyte. This paper investigates the annling properties on Ag-doped $Ge_{25}Se_{75}$ thin film structure and describes the electrical characteristics of PMC-RAM. The composition of the intercalation products containing Ag is confirmed using X-ray diffraction which shows the formation of Ag-doped $Ge_{25}Se_{75}$.

  • PDF

디젤 엔진 시동을 위한 160Ah급 니켈 수소(Ni-MH) 축전지 (The Study of the 160Ah Ni-MH battery for Diesel Engine Starting)

  • 박동필;김래현
    • 에너지공학
    • /
    • 제23권4호
    • /
    • pp.1-8
    • /
    • 2014
  • 본 연구에서 세계 환경오염 지정유해물질을 함유한 납축전지와 니켈 카드뮴(Ni-Cd) 축전지를 대체할 수 있는 대용량 니켈 금속수소(Ni-MH) 축전지를 이용하여, 디젤발전기 시동을 걸기위해 80Ah 전지를 병렬로 연결하여 160Ah의 Ni-MH 축전지를 제작하였다. 160Ah 전지에 적합한 전극을 개발하기 위하여 3성분계의 전해질 조성이 요구되었으며, 그 후, 고율방전을 평가하였다. 음극 성능의 개선을 위하여, Zn을 첨가하였다. 160Ah급 축전지로 디젤발전기의 시동을 위한 다양한 실험을 통하여 평가를 하였으며, 최종적으로 디젤발전기의 시동이 가능함을 확인하였다.

Electrodeposition of Ternary CdZnS Semiconductor Thin Films Using a S-Modified Polycrystalline Au Electrode

  • Ham, Sun-Young;Cho, Se-Jin;Lee, Ung-Ki;Jeon, So-Yeon;Shin, Ji-Cheol;Myung, No-Seung;Paeng, Ki-Jung
    • 전기화학회지
    • /
    • 제10권4호
    • /
    • pp.262-264
    • /
    • 2007
  • This paper describes a two-step approach for the electrochemical deposition of CdZnS thin films on the polycrystalline Au electrode. Initially, an Au substrate is electrochemically modified with a sulfur layer. In the second step, the layer is electroreduced to $S^{2-}$ in the electrolyte dosed with the requisite amount of $Cd^{2+}$ and $Zn^{2+}$ ions to generate CdZnS films in situ. This approach was validated using a combination of linear sweep voltammetry and electrochemical quartz crystal microgravimetry. Thus synthesized CdZnS thin films have different composition depending on the composition of electrolytes. CdZnS thin films are characterized by energy-dispersive X-ray analysis and Raman spectroscopy.

철도시스템비상전원용 니켈수소(NiMH)전지 (Railway System Standby Power Nickel Metal Hydride Battery)

  • 김성용;박동필
    • 한국철도학회논문집
    • /
    • 제12권6호
    • /
    • pp.873-877
    • /
    • 2009
  • 본 연구는 독성물질을 함유한 납축전지와 니켈카드뮴전지를 대체할 수 있는 니켈금속수소전지를 이용하여 철도시스템 비상전원용으로 사용위해 80Ah 전지를 병렬로 연결하여 160Ah의 니켈금속수소전지 제작하였다. 160Ah 전지에 적합한 전극을 개발하기 위하여 3성분계의 전해질의 고율방전에 대해 평가하였다. 160Ah급 전지는 철도시스템 비상전원용으로 사용하기 위한 여러 가지 실험을 하여 평가를 하였다.

철도시스템비상전원용 니켈수소(NiMH)전지 (Railway system standby power Nickel metal hydride battery)

  • 박동필
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2006년도 추계학술대회 논문집
    • /
    • pp.636-645
    • /
    • 2006
  • 본연구는 독성물질을 함유한 납축전지와 NiCd전지를 대체할 수 있는 NiMH전지를 이용하여 철도시스템 비상전원용으로 사용위해 80Ah 전지를 병렬로 연결하여 160Ah의 NiMH전지 제작하였다. 160Ah 전지에 적합한 전극을 개발하기 위하여 3성분계의 전해질의 고율방전에 대해 평가하였다. 160Ah급 전지는 철도시스템 비상전원용으로 사용하기 위한 여러 가지 실험을 하여 평가를 하였다.

  • PDF

순간접전기전력법에 의한 용융 Cd중의 Zn과 Cu, Ag, In, Bi, Pb 및 Sn와의 상위작용 파라미터 (Thermodynamic interaction parameter between Zn and Cu, Ag, In, Bi, Pb, Sn in Dilute cadmium alloy by Touch Instant electro-motive force method)

  • 김대룡;윤겸하
    • 한국표면공학회지
    • /
    • 제15권4호
    • /
    • pp.192-207
    • /
    • 1982
  • A study has been made of the interaction parameters of Zn other elements in dilute solutesd solution of molten cadmium alloys over the temperature range of 450 to 570$^{\circ}C$. The experi-mental measurementss were made in a touch instant cell using a fusedd Licl-KCl electrolyte. The activity of zinc in binary and ternary solutions sexhibiteds a strong positive deviation from Raoult's law. The addition of silver, indium or lead increased the activity of zinc whereas addition of copper, bismuth or tin decreased the zinc activity slightly. The results for all the metallic solutions showed a linear dependence of reciprocal of ab-solute temperature over the experimental range. The interaction parameters obtained are as follows.

  • PDF