• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1033-1034
• /
• 2006

Metallic compound of ternary Al-B-C system was prepared by mechanical alloying (MA) using Al, boron and graphite powders as starting materials. MA was carried out using Spex 8000 mixer/mill for 50 hours in an argon atmosphere without process control reagent such as methyl alcohol. The MA powders obtained were heat-treated in vacuum at the temperature of 873 and 1273 K for 5 hour. Pure ternary Al-B-C compound was obtained in the chemical content of Al:B:C=55:27:18. The ternary compound obtained in this study has a new phase whose crystal structure is not identified yet.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.258-259
• /
• 2005

[ $CuInSe_2$ ] thin films were fabricated at various fabrication conditions (substrate temperature, sputtering pressure, BC/RF power, vapor deposition, heat treatment). And structural and electrical properties were measured in order to certify optimum conditions for growth of the ternary compound semiconductor $CuInSe_2$ thin films with stoichiometric composition. $CuInSe_2$ thin film was well made at the heat treatment of 500[$^{\circ}C$] of SLG/Cu/In/Se stacked elemental layer which was prepared by sputter and thermal evaporator, and chemical composition of the thin film was analyzed nearly as the proportion of 1 : 1 : 2. At the same time, carrier concentration, hall mobility and resistivity of the thin films was $1.27\sim9.88\times10^{17}[cm^{-3}]$, $49.95\sim185[cm^2/V{\cdot}s]$ and $10^{-1}\sim10^{-2}[\Omega{\cdot}cm]$, respectively

• ETRI Journal
• /
• 제13권4호
• /
• pp.42-51
• /
• 1991

MBE 성장시 기판 표면에서의 성장과정을 운동론적 지배과정과 열역학적 지배과정으로 나누어 성장모델을 제시하였으며, 화학적 평형상태에서의 열역학이 III-V compound의 성장속도와 composition 에 미치는 영향을 기존의 보고된 결과 데이터와 비교 분석하였다. 특히 miscibility gap 내에 존재하는 III-V ternary compound의 경우 박막의 성질 및 소자의 특성에 영향을 미치는 alloy clustering은 저온 성장시 surface kinetics에 의해, 고온성장시에는 열역학적 spinodal decomposition에 의해 결정됨을 알수 있었다. 열역학적 모델에서는 기판과 layer사이의 lattice mismatch와 재료의 elastic coefficient의 함수인 additive strain Gibbs free energy, 그리고 ternary solid solution의 regular behavior를 가정하여 ternary alloy의 mixing에 기인한 excess Gibbs free energy를 고려하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.304.2-304.2
• /
• 2014

Chalcogenides (Te,Se) and pnictogens(Bi,Sb) materials have been widely investigated as thermoelectric materials. Especially, Bi2Te3 (Bismuth telluride) compound thermoelectric materials in thin film and nanowires are known to have the highest thermoelectric figure of merit ZT at room temperature. Currently, the thermoelectric material research is mostly driven in two directions: (1) enhancing the Seebeck coefficient, electrical conductivity using quantum confinement effects and (2) decreasing thermal conductivity using phonon scattering effect. Herein we demonstrated influence of annealing temperature on structural and thermoelectrical properties of Bismuth-telluride-selenide ternary compound thin film. Te-rich Bismuth-telluride-selenide ternary compound thin film prepared co-deposited by thermal evaporation techniques. After annealing treatment, co-deposited thin film was transformed amorphous phase to Bi2Te3-Bi2Te2Se1 polycrystalline thin film. In the experiment, to investigate the structural and thermoelectric characteristics of Bi2Te3-i2Te2Se1 films, we measured Rutherford Backscattering spectrometry (RBS), X-ray diffraction (XRD), Raman spectroscopy, Scanning eletron microscopy (SEM), Transmission electron microscopy (TEM), Seebeck coefficient measurement and Hall measurement. After annealing treatment, electrical conductivity and Seebeck coefficient was increased by defect states dominated by selenium vacant sites. These charged selenium vacancies behave as electron donors, resulting in carrier concentration was increased. Moreover, Thermal conductivity was significantly decreased because phonon scattering was enhanced through the grain boundary in Bi2Te3-Bi2Te2Se1 polycrystalline compound. As a result, The enhancement of thermoelectric figure-of-merit could be obtained by optimal annealing treatment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.414-415
• /
• 2005

A solar cell is an element to transform the solar light energy into the electric energy in a moment. The single crystal element of high quality on which many studies were conducted in the past has a high efficiency of energy transformation, but its price competitiveness is so poor that it has failed to be popularized However, recently, in terms of an environment-friendly alternative energy, studies on applicability of the polycrystal solar cell have been actively under way. Among subject substances for such solar cell, $CuInSe_2$ has several good physical properties so that the greatest attention is paid to it as an optical absorption layer material for a low-cost solar cell of high efficiency. In order to manufacture the $CuInSe_2$ compound thin film, the unit element was deposited by using the sputtering method and the evaporation method and the heat treatment process was used in an electric furnace. Thereby, we intended to get a single-phase $CuInSe_2$ compound thin film.

• 대한화학회지
• /
• 제6권2호
• /
• pp.133-142
• /
• 1962

This study was carried out to investigate the lead-bismuth-sodium ternary system which a basis of the Dittmer method as a part of "the fundamental study of pyrometallurgical debismuthizing of lead". Thermodynamic properties of each liquid Pb-Bi, Pb-Na binaries as well as liquid Pb-Bi-Na ternary solution were measured by e.m.f. of these concentration cells, and those of each component were also determined. Furthermore, iso-activity lines including Pb rich side composition of Pb-Bi-Na ternary solution were determined. The relationship between those thermodynamic characteristics and tendency of intermetallic compound formation was discussed through the above experiments.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.566-569
• /
• 2006

태양전지는 태양광에너지를 바로 전기에너지로 전환시키는 소자이다. 과거에 많이 연구되던 고품질의 단결정 소자는 높은 에너지 변환효율을 가지고 있으나 가격 경쟁력이 크게 뒤져 일반화되지 못하였다. 최근에는 다결정 태양전지의 응웅 가능성에 대한 연구가 활발히 진행되어 오고 있다. 이중 $CuInSe_2$는 여러 가지 좋은 물성을 가지고 있어서, 저가의 고효율 태양전지를 위한 광흡수층 재료로 가장 주목받고 있다. $CuInSe_2$ 화합물 박막을 제조하기 위해 단위원소를 spttering법 과 Evaporeation법을 사용하여 증착하고 전기로에서 열처리 공정을 사용하여 single-phase 화합물 $CuInSe_2$ 박막을 얻고자 하였다.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.2993-2999
• /
• 2015

강 제조 회사들은 연속주조금형의 표면을 보호하기 위해 Ni-B 또는 Ni-Co 합금 도금을 적용하고 있으며, 도금 층에 균열이 생기게 하는 황을 함유한 사카린 윤활제를 사용하고 있다. 균열 및 인장 응력을 유발하는 것은 Ni-S 화합물로 여겨진다. Ni-Mn-B 삼원합금은 Ni-S 화합물이 형성되기 이전에 Mn-S 화합물을 형성하여 균열을 억제하기 위해서 개발되었으나, Ni-Mn-B 합금 도금에 관한 국내나 해외 기준이 없다. 그리하여 새로이 개발된 Ni-Mn-B 도금을 평가하기 위한 신뢰성 평가기준을 개정하려한다. 가속수명시험을 개발하기 위해 FMEA(고장형태 영향분석)가 사용되어 도금의 주요 파괴 원인을 분석하였다. Ni-Mn-B 신뢰성 기준은 가속수명시험 방법을 포함하였고, 기본 성능 시험과 환경시험, 가속수명시험으로 분류되었으며, 80% 신뢰수준으로 B10수명 1 000시간을 보장하도록 고안되었다.

• 열처리공학회지
• /
• 제10권2호
• /
• pp.138-149
• /
• 1997

TiN and AlN are ceramic materials with extensive applications due to its excellent mechanical and chemical properties at elevated temperature. The purpose of this research is to develop the method for the synthesis of ternary nitride powder, titanium-aluminum-nitrogen system, which have an excellent property of both TiN and AlN. The ternary nitride such as $Ti_3AlN$, $Ti_2AlN$ and $Ti_3Al_2N_2$ can be synthesized by the interdiffusion nitriding method in Ar gas, however, the ternary nitride coexist with TiN, AlN, $Ti_3Al$ and ${\alpha}$-Ti. The ternary nitride are stable below $1400^{\circ}C$, but these are gradually decomposed into TiN, $Ti_3Al$ and AlN above $1400^{\circ}C$. The thermal oxidation characteristics of the Ti-Al-N compound synthesized by the interdiffusion nitriding method is superior to that of the TiN+AlN mixed powder, and the oxidation for both materials show the differential behaviors.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 춘계학술발표회
• /
• pp.59-59
• /
• 1996