• The Korean Journal of Pain
• /
• v.9 no.2
• /
• pp.415-418
• /
• 1996

The first reported the neural blockade of ganglion impar for pain control of perineal pain in 1990 by Plancarte and his fellows. they used 6ml of 10 percent phenol. but the point of issues, same as other neurolytics, are that it is impossible to check and control its spreading, so it might be possible to destruct the coccygeal plexus and sacral nerve, and also it has only short action time. Because of these problems, it could be very dangerous to attempt this procedure especially not for relieving the pain on cancer terminal patient, but for the sympathectomy of ganglion impar on the other purpose. We used the RF generator which had the control ability to point out the destructive lesion accurately. inserted We made the small burr hole on the sacrum near the sacrococcygeal junction directly, through the hole, and performed thermocoagulation to the ganglion impar.

• Journal of Korea Multimedia Society
• /
• v.7 no.4
• /
• pp.496-504
• /
• 2004

This paper preposes a various policies and experiment results to select streams in a presentation to be transcoded for mobileterminals after distinguishing the characteristics of streams in the presentation. This applies to the presentation composed of various data streams on a PC server. The rationale of the research is that the stream selection polices for transcoding enhances the speed of presentation in mobile terminals considerably faster than in the case when every stream has to be transcoded. Thus, the thesis suggests a stream selection polices for transcoding based on EPOB (End Point of Over Bandwidth) and aims to lower the requiring bandwidth of the presentation to the network bandwidth as well as to minimize early delay time for the presentation to be played in mobile terminals.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.83-87
• /
• 2009

The MAC protocol of HiperLAN/2 is based on TDMA/TDD. Mobile terminal acquires a data transmission opportunity as successfulness in channel competition through RCH (Random CHannel) phase. Therefore, AP (Access Point) be able to dynamically assign optimum RCH at next frame according to the number of success and collision. In this paper, we suggest scheme that fluctuate RCH (Random CHannel) number as fixed value considering success and collision for improvement of performance in HiperLAN/2. To prove efficiency of proposed scheme, a lots of simulations are conducted and analyzed in view of throughput and access delay.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.682-686
• /
• 2009

The MAC protocol of HiperLAN/2 is based on TDMA/TDD. The radio channels are assigned by AP(Access Point) that is centrally operated. Mobile terminal that data transmission is necessary to uplink requests radio resource to AP through RCH channel. The changing number of RCHs in each MAC frame is important because too many RCHs may result in a waste of radio resources and too few RCHs may result in many access collisions and prolong time that connect to AP. Therefore, number of RCH should be allocated properly according to traffic. From these viewpoint, this paper proposes an advanced scheme that dynamically changed the number of RCH which is based on the number of success and collision of RR message in previous MAC frame. To prove efficiency of proposed scheme, a lots of simulations are conducted and analyzed.

• Physical Therapy Korea
• /
• v.9 no.3
• /
• pp.39-46
• /
• 2002

In this study, vertical acceleration of center of mass was observed along normal gait phases in 9 healthy male volunteers (aged $25.7{\pm}2.18$). The developed wireless accelerometric device was attached on the intervertebral space between L3 and L4 using a semi-elastic waist belt. A three-dimensional motion analysis system, synchronized with the accelerometry, was used for detecting gait phases. There was no significant correlation between the body weight and the acceleration. The first peak curve covered loading response phase. The second downward peak point was matched accurately with the opposite toe-off. In mid-stance and terminal stance, the acceleration curve highly resembled the vertical ground reaction force curve. There was no significant difference in timing between the final upward peak point and the initial contact. Therefore, the developed accelerometry system would be helpful in determining determine temporal gait pattems in patients with gait disorders.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.436-438
• /
• 2007

As the sensors and communication technology get advance, the remote health diagnosis for patients and senior persons at home are possible now without visiting doctors in hospitals. A low-power ubiquitous health check device was developed adapting Real-Time Embedded Linux is developed. This ubiquitous device is consisted of three sensors. The wrist type health checking terminal acquires periodically the health data by using a blood pressure sensor, a pulse sensor and a body temperature sensor. It transmits the health data to the access point located at the home center through the ZigBee wireless communication modem. This health data collector or access point device sends the data again to the main server operated in a hospital or health care organization. The health server control continuously the input data and sends an alarm signal to the assigned. doctor and responsible persons using cellular SMS when any dangerous events occur. This wrist type health check device has an embedded linux OS using Intel PAX255 MPU. The developed U-Health system is applicable for checking patients health in remote at home. And their family or related persons in remote site can check the patients health status at any time. They can be assured by receiving SMS record and alarm of emergency case which is transmitted from the health server.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1047-1055
• /
• 2005

One of major characteristics in wireless LAN is terminal's frequent mobility, so it makes many overheads in the process of authentications repeatedly at each handoffs. So I propose IAPP(Inter Access Point Protocol) of IEEE 802.11f, modified context block and 4 way handshake of IEEE 802.11i, in order to implement secure and rapid handoff. The context block. I proposed, doesn't makes any communication with RADIUS server at handoff period. Therefore, it guarantee higher efficiency than existing handoff mechanisms. Also it can improve security vulnerability by padding authentication field in the context block for providing in advance against Replay and DoS(Denial of Service) attacks.

• Journal of Digital Contents Society
• /
• v.12 no.3
• /
• pp.347-353
• /
• 2011

In HIPERLAN/2, the radio channels are assigned by AP(Access Point) that is centrally operated and the MAC protocol is based on TDMA/TDD. Mobile terminal that data transmission is necessary to uplink requests radio resource to AP through RCH channel. The changing number of RCHs in each MAC frame is important because too many RCHs may result in a waste of radio resources and too few RCHs may result in many access collisions and prolong time that connect to AP. Hence the number of RCH should be allocated properly according to traffic. From these point, this paper proposes an scheme that dynamically assigned the number of RCH which is based on the number of success and collision of message in previous MAC frame. To prove efficiency of proposed scheme, lots of simulations are conducted and analyzed.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.883-886
• /
• 1996

Instead of point-to-point hard wiring between substation yard equipments and SCADA RTU(Remote Terminal Unit), fibre optic cable will be used in the portion between Local Units and Central Unit in the future KEPCO 765kV substation. The connections between substation yard equipments and nearby Local Unit remain the same hard wiring. The new fibre optic system will provide security especially during ground faults and is immune to electrical noise. A prototype system will be manufactured and installed in the existing 154kV Yeosan Substation by the end of July this year and operated for one year. By incorporating the operation experiences acquired in the system, an improved system will be commercially applied to 765kV Shin-An-Seong Substation where 345kV GIS will be installed initially and act as the switching station in the year 1998. The system is composed of one Central Unit and several Local Units. The Central Unit is composed of two workstation level computers, one is in operation and the other backup, and a Communication Control Unit. The Local Unit uses the existing SCADA RTU technology and takes the form of a distributed one. Between the Communication Control Unit and Local Units, the fibre optic system with star-coupler is used.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.35-41
• /
• 2014

This paper presents a design method of programmable low pass filter(PLPF) which reduce an estimation error of a zero crossing point(ZCP) for a high speed brushless DC(BLDC) motor drive. BLDC motor sensorless drive is possible by estimation of ZCP. The ZCP estimated by detecting a change of back-EMF polarity has the estimation error because noises exist on the measured back-EMF. Therefore a calculated commutation timing using the ZCP is inaccurate. And the inexact commutation timing leads to ripples of 3-phase current and degradation of drive performance. This paper proposes the design method of the PLPF to overcome these problems. First, a speed calculated a inaccurate period of the ZCP is analyzed in the frequency domain. Then, the PLPF that has varying cut-off frequency according to change of the speed is designed on the frequency analysis result. The proposed method is verified by the experiment.