• 제목/요약/키워드: Terminal point

검색결과 472건 처리시간 0.028초

제주신항의 해상교통안전성평가에 관한 연구 (A Study on the Assessment of the Marine Traffic Safety through Construction of the Jeju New Harbor)

  • 김창제;채양범;예병덕;강성진;김원욱;정재용
    • 한국항해항만학회지
    • /
    • 제26권1호
    • /
    • pp.112-119
    • /
    • 2002
  • 80,000 G/T급 크루즈선이 입항할 수 있는 터미널을 계획하고 있는 제주신항에 대하여 자연 ·환경 조건 및 방파제 등의 구조물 등을 고려하여 선박조종시뮬레이션을 실시하여 입 ·출항 및 접 이안의 안전성을 평가하고자 한다. 안전성 평가는 항로경계의 침범여부, 구조물과의 최근접거리, 선박조종자의 주관적 평가를 통계적으로 해석하는 방법을 이용하였다.

Improved LTE Fingerprint Positioning Through Clustering-based Repeater Detection and Outlier Removal

  • Kwon, Jae Uk;Chae, Myeong Seok;Cho, Seong Yun
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제11권4호
    • /
    • pp.369-379
    • /
    • 2022
  • In weighted k-nearest neighbor (WkNN)-based Fingerprinting positioning step, a process of comparing the requested positioning signal with signal information for each reference point stored in the fingerprint DB is performed. At this time, the higher the number of matched base station identifiers, the higher the possibility that the terminal exists in the corresponding location, and in fact, an additional weight is added to the location in proportion to the number of matching base stations. On the other hand, if the matching number of base stations is small, the selected candidate reference point has high dependence on the similarity value of the signal. But one problem arises here. The positioning signal can be compared with the repeater signal in the signal information stored on the DB, and the corresponding reference point can be selected as a candidate location. The selected reference point is likely to be an outlier, and if a certain weight is applied to the corresponding location, the error of the estimated location information increases. In order to solve this problem, this paper proposes a WkNN technique including an outlier removal function. To this end, it is first determined whether the repeater signal is included in the DB information of the matched base station. If the reference point for the repeater signal is selected as the candidate position, the reference position corresponding to the outlier is removed based on the clustering technique. The performance of the proposed technique is verified through data acquired in Seocho 1 and 2 dongs in Seoul.

암환자 인식에 관한 연구 - 간호사ㆍ의사를 중심으로

  • 조인향
    • 호스피스학술지
    • /
    • 제2권1호
    • /
    • pp.58-74
    • /
    • 2002
  • This paper constitutes a descriptive investigation and used a structured questionnaire to investigate nurses' and doctors' recognition of cancer patients. The subjects were extracted from the medical personnel working at the internal medicine, the surgery ward, the obstetrics and gynecology department, the pediatrics department, the cancer ward, and the emergency room of five general hospitals located in Seoul and Gyeonggi Province. The research lasted from August, 2001 to September 2001. Total 137 nurses and 65 doctors were included and made out the questionnaires directly distributed by the investigator. The study tool was also developed by the investigator and consisted of such items as the demographic and social characteristics, the medical personnel's recognition degree of cancer and cancer patients, their recognition of the management of cancer patients, and their participation in a hospice. The results were analyzed using the SPSS Window program in terms of technological statistics, ranks, t-test, and ANOVA. The reliability was represented in Cronbach' α=.75. The nurses' and doctors' recognition degree of cancer and cancer patients had an overall average of 3.86 at the 5 point-scale. The items that received an average of 4.0 or more included 'Medical personnel should explain about the cancer cure plans to the cancer patient and his or her family', 'A patient whose case has been diagnosed as a terminal cancer should be notified of it, 'If I were a cancer patient, I would want to get informed of it,' and 'Cancer shall be conquered whenever it is'. In the meantime, the items that received an average of 3.0 or less was 'My relationship with the cancer patient's family has gotten worse since I announced his or her impending death.' And according to the general characteristics and the difference test, the recognition degree of cancer and cancer patient was high among the subgroups of nurses, females, married persons, who were in their 30s, who had a family member that was a cancer patient, and who received a hospice education. The biggest number of the nurses and doctors saw 'a gradual approach over several days'(68.8%) as a method to tell a cancer patient about his or her cancer diagnosis or impending death. Those who usually tell tragic news were the physician in charge(62.8%), the family members or relatives(32.1%) and the clergymen(3.8%) in the order. The greatest number of them recommended a cancer patient's home as the place where he or she should face death because they thought 'it would stabilize his or her mentality'(91.9%) while a number of them recommended the hospital because they 'should give the psychological satisfaction to the patient'(40%) or 'should try their best until the last moment of the patient's death'(30%). A majority of the medical personnel regarded 'smoking or drinking' and 'diet' as the causes of cancer. The biggest symptom of a cancer patient was 'pain' and the pain management of a cancer patient was mostly impeded by the 'excessive fear of drug addiction, tolerance to drugs and side effects of drugs' by medical personnel, the patient, and his or her family. The most frequently adopted treatment plan of a terminal cancer patient was 'to do whatever the patient or his or her family wants' to resort to a hospice' and 'to continue active treatment efforts' in the order. The biggest reasons why a terminal cancer patient went to see a doctor were 'pain alleviation' 'control of symptoms other than pain(intravenous supply)' and 'incapability of the patient's family' in the order. Terminal cancer patients placed their major concern in 'spiritual(religious) matter' 'emotional matters' their family' 'existence' and 'physical matters' in the order. 113(58.5%) of the whole medical personnel answered they 'would recommend' an alternative treatment to a terminal cancer patient mostly because they assumed it would 'stabilize the patient's mentality.' Meanwhile, 80(41.5%) of them chose 'not to recommend it mostly due to the unverified effects and high cost of it(78.7%). A majority of them, I. e. 190(94.1%) subjects said they 'would recommend' a hospice to a terminal cancer patient mostly because they thought it would help the patient to 'mentally prepare'(66.6%) Only 17.3% of them, however, had received a hospice education, most of which was done through the hospital duty education(41.4%) and volunteer training(34.5%). The follows are results of this study: 1. The nurses and the doctors turned out to be still passive and experience confusion in dealing with a cancer patient despite their great sense of responsibility for him or her. 2.Nurses and Doctors realize the need of a hospice, but an extremely small number of them participate in a hospice education or performance. Thus, a whole recognition of a hospice should be changed, for which purpose a hospice education for nurses and doctors should be provided. 3.Terminal cancer patients preferred their home to a hospital as the place to face their impending death because they felt it would bring 'mental stability.' And most of nurses and doctors think it would be unnecessary for them to be hospitalized just for control of their symptoms. Accordingly a terminal cancer patient can be cared at home, and a home hospice care needs to be activated.

  • PDF

SDR(Software Defined Radio)에 적합한 네트워크 코프로세서 구조의 설계 (The Design of a Structure of Network Co-processor for SDR(Software Defined Radio))

  • 김현필;정하영;함동현;이용석
    • 한국통신학회논문지
    • /
    • 제32권2A호
    • /
    • pp.188-194
    • /
    • 2007
  • 디지털 컨버전스가 이루어지면서 무선기기들 간의 호환성은 단말기의 중요한 특성이 되었고, SDR은 가장 필요한 기술이고 표준이다. 하지만 통신 프로토콜이 다른 무선 환경에서 호환성을 갖는 단말기를 하드웨어만을 이용한 ASIC이나 SoC로 만들기는 어려운 실정이다. 그래서 본 논문은 여러 통신 프로토콜을 가속화 시킬 수 있는 코프로세서의 구조를 제안하였다. 메인 프로세서와 쉽게 연동이 되고, 네트워크의 PHY 레이어에 특화된 코프로세서가 바로 그것이다. 통신 시스템에서 가장 많이 사용하는 변조 방식인 OFDM과 CDM을 사용하는 무선 랜 표준 IEEE802.11a와 IEEE802.11b를 모델링한 C 프로그램을 ARM cross 컴파일러를 이용해 컴파일 하였고, Simplescalar-Arm 버전을 이용해 시뮬레이션 및 프로파일을 수행하였다. 프로파일 결과 비터비 연산과 부동 소수점 복소수 연산이 가장 많은 연산을 차지하였다. 프로파일 결과를 바탕으로 비터비 연산과 부동 소수점 복소수 연산을 가속화 할 수 있는 코프로세서를 제안하여 명령어를 추가했으며, 추가된 명령어는 Simplescalar-Arm 버전을 이용해 시뮬레이션 하였다. 시뮬레이션 결과 ARM 코어 하나만 사용 했을 때보다 비터비 연산은 약 4.5배, 부동 소수점 복소수 연산은 약 2배의 성능 향상을 보였다. IEEE802.11a에서는 일반 ARM 코어보다 약 3배의 성능 향상을 보였고, IEEE802.11b에서는 약 1.5배의 성능 향상의 보였다.

무선 ATM망에서 핸드오프시 접속점 버퍼 오버플로우와 언더플로우를 방지하는 ABR 전송률 기반 제어 방안 (An ABR Rate-based Control Scheme Avoiding Access Point Buffer Overflow and Underflow during Handoffs in Wireless ATM Networks)

  • 하인대;오정기;박상준;최명환
    • 한국정보과학회논문지:정보통신
    • /
    • 제28권4호
    • /
    • pp.527-539
    • /
    • 2001
  • 무선 ATM 시스템은 다양한 품질의 광대역 서비스를 효율적으로 제공하기 위해 개발된 ATM 기술을 무선 단말에게도 적용함으로써 유선 ATM망에서 제공하는 다양한 광대역 서비스를 무선 단말에게도 효율적으로 제공할 수 있는 장점이 있으며, ATM 트래픽 중 ABR 서비스는 전송자가 망의 가용대역폭에 따라 전송률을 조정할 수 있게 함으로써 망의 효율성을 높이도록 한다. 그러나 무선 ABR 연결의 핸드 오프기간 중에는 무선부와 유선부의 경계점인 AP(access point)에서 큐가 매우 커질 수 있다. 본 논문에서는 이진 피드백 전송률 제어 방식을 사용하는 무선 ATM망에서 무선 ABR 연결의 핸드오프 동안 AP에서 버퍼 오버플로우가 발생되지 않도록 하는 큐의 크기를 정하는 방안과 핸드오프 이후 언더플로우의 발생을 최소화하는 방안을 제시한다. 이 방안은 핸드오프기간 동안과 핸드오프 이후 일정기간 동안의 두 단계에 걸쳐 전송자의 전송률을 제어하며 모의실험을 통해 핸드오프시 AP에서 버퍼 오버플로우와 언더플로우가 발생되지 않도록 전송자의 전송률을 제어할 수 있음을 확인하였다. 제안된 방안은 핸드 오프에 의한 버퍼 오버플로우와 언더플로우를 예방함으로써 핸드오프 과정에서의 무선 ABR 서비스의 처리율을 높힌다.

  • PDF

HTTP Streaming 환경에서 User Profile 기반 Seamless Framework 제공방법 (User Profile Based Seamless Framework under HTTP Adaptive Streaming Environment)

  • 김정한;이장원;김규헌;서덕영
    • 방송공학회논문지
    • /
    • 제16권1호
    • /
    • pp.155-173
    • /
    • 2011
  • 최근 방송시스템의 디지털화와 통신기술의 발달로 기존의 고정형 디스플레이 장비와 전용채널을 통해 주로 이루어지던 콘텐츠 소비형태가 변화하고 있다. 기존 고정형 디스플레이 장비를 통해 정해진 시간과 장소에서만 소비 할 수 있었던 미디어 콘텐츠는, 최근 언제/어디서나 IP(Internet Protocol)망에 접속하여 콘텐츠를 선택/소비 할 수 있는 단말기의 등장과 유동적인 IP환경에서도 사용자의 전송채널에 따라 적응적으로 스트리밍 서비스를 제공하는 HTTP(Hypertext Transfer Text Protocol) 기반의 적응형 스트리밍 기술로, 사용자는 과거의 제약에서 벗어나 콘텐츠를 소비 할 수 있게 되었다. 이와 같은 방송환경의 변화로, 사용자는 자신이 보유한 단말기들을 환경에 따라 변경해 가면서 콘텐츠를 소비 할 수 있게 되었다. 하지만, 현재 제공되고 있는 HTTP 적응형 스트리밍 서비스에서는 사용자가 소비하던 콘텐츠를 단말기를 변경하여 연속해서 소비하고자 하는 경우, 사용자가 콘텐츠의 종료 시점을 기억하여, 직접 변경된 단말기에 적용해야 해야 한다는 문제점이 있다. 따라서, 본 논문은 이러한 문제점을 해결하기 위해, 동일한 콘텐츠를 소비하는 단 말간의 연속된 콘텐츠 소비환경을 위한 데이터를 기술하는 유저 프로파일(User Profile)을 정의하고,이 파일을 변경 된 단말기와 공유하여, 단말기 사이의 연속적인 콘텐츠 소비를 가능하게 하는 방법을 제안하고자 한다. 또한, 본 논문은 제안한 방법을 검증하기 위해 HTTP 적응형 스트리밍 서비스 중에 하나인 Smooth Streaming 기반의 시스템을 구현하여 제안한 방법을 검증하고자 한다.

반도체 웨이퍼 다이싱 공정을 위한 생산시점 정보관리시스템 (A Point of Production System for Semiconductor Wafer Dicing Process)

  • 김인호
    • 한국컴퓨터정보학회논문지
    • /
    • 제14권10호
    • /
    • pp.55-61
    • /
    • 2009
  • 본 연구는 웨이퍼 다이싱 공정의 가공정보들을 수집하여 실시간으로 관리하는 생산시점의 정보관리시스템에 대한 연구이다. 개발한 시스템은 POP용 단말기, 라인 컨트롤러 및 네트웍으로 구성된다. LAN은 상위관리시스템을 연결하며, RS485 네트웍은 하위시스템인 라인 컨트롤러와 단말기를 연결한다. 라인 컨트롤러는 POP 단말기와 서버를 연결하기 위해 사용된다. 웨이퍼의 실시간 가공정보는 기계, 제품, 작업자의 정보발생원들로부터 얻고, 이들은 최적절삭조건을 계산하기 위하여 사용된다. 수집된 정보는 절삭속도, 순수의 여부, 처리 중인 블레이드의 누적 절삭량 및 불량 웨이퍼의 수이다. 상위시스템의 생산계획정보는 웨이퍼 가공공정의 관리를 위해서 현장에 전달되며, 생산결과정보는 현장에서 수집하여 서버로 전달되고 필요한 형태로 정보가 가공되어 공정관리용 정보로 사용된다. 개발한 시스템을 반도체 웨이퍼 가공공정에 적용한 결과, 생산진전상태, 각 기계에 대한 작업시간 및 비작업시간의 해석 및 웨이퍼 불량률의 해석이 가능하며, 이들은 다이싱 공정의 품질 및 생산성 향상을 위한 생산공정 관리정보로 활용할 수 있을 것이다.

IEEE 802.11 무선랜 환경에서의 AP 선택 알고리즘 (Access Point Selection Algorithm for Densely Deployed IEEE 802.11 WLANs)

  • 김결;이수경
    • 한국통신학회논문지
    • /
    • 제41권6호
    • /
    • pp.707-713
    • /
    • 2016
  • IEEE 802.11 Wireless LAN 환경에서, 현재 일반적인 기존 단말의 Access Point (AP) 선택은 신호세기에 기반한다. 하지만, 신호세기 기반 AP선택 방법은 최적의 데이터 전송률을 보장하지 않는다. 이 문제 해결을 위해 최근 여러 AP선택 방법들이 제안되었지만 AP선택 시, 지연 문제를 가지며 실제 밀집된 AP환경을 고려하지 않았다. 본 논문은 밀집된 AP 환경에서 단말의 신호세기 및 Throughput 측정실험을 통해 기존 AP선택 방법의 문제점을 확인하고, 이를 보완하기 위해 Link Speed 및 IEEE 802.11 무선링크의 Round Trip Time(RTT)을 Scoring하여 AP선택을 수행하는 알고리즘을 제안한다. 또한, 실험을 통해 제안된 AP선택 알고리즘이 기존방법들에 비해 성능적으로 향상되었음을 증명한다.

모바일 환경에서 효율적인 약도 표현 방법 (Efficient Sketch Map Representation in Mobile Environment)

  • 이기정;;황보택근;양영규;소용욱
    • 대한원격탐사학회지
    • /
    • 제21권4호
    • /
    • pp.329-339
    • /
    • 2005
  • 휴대폰의 지도서비스는 단말기의 해상도와 프로세스의 제약으로 인하여 데이터를 간략화하면서 사용자의 이해도를 높일 수 있는 약도의 제공이 보다 효율적일 수 있다. 약도는 출발지와 목적지의 경로를 중심으로, 주변의 중요한 도로나 지형지물 등을 단순화하여 사용자가 이해하기 쉽게 표현된 형태이다. 약도 서비스를 위해서는 우선 출발지와 목적지의 경로 및 그 주변 도로를 선택하여 약도식으로 간략화하는 방법이 필요하며, 단말기의 해상도에 적합하게 주변 지형지물을 간략화 된 도로와 함께 약도화하여 표현하는 방법이 필요하다. 이에 본 논문에서는 휴대폰에서 지도를 효율적으로 표현하기 위하여, 지도 일반화 개념을 이용한 약도화 방법을 제안하였다. 제안하는 약도 표현 방법은 현재 상업적으로 서비스되고 있는 지도 서비스와 비교하여 도로를 구성하는 노드의 수가 감소하고, 중요한 지형지물의 선택 등을 수행하여 데이터 효율성이 우수하고, 경로의 명시성과 이해도가 높은 것으로 조사되었다.

Application of numerical simulation of submersed rock-berm structure under anchor collision for structural health monitoring of submarine power cables

  • Woo, Jinho;Kim, Dongha;Na, Won-Bae
    • Smart Structures and Systems
    • /
    • 제15권2호
    • /
    • pp.299-314
    • /
    • 2015
  • Submersed rock-berm structures are frequently used for protection of underwater lifelines such as pipelines and power cables. During the service life, the rock-berm structure can experience several accidental loads such as anchor collision. The consequences can be severe with a certain level of frequency; hence, the structural responses should be carefully understood for implementing a proper structural health monitoring method. However, no study has been made to quantify the structural responses because it is hard to deal with the individual behavior of each rock. Therefore, this study presents a collision analysis of the submersed rock-berm structure using a finite element software package by facilitating the smoothed-particle hydrodynamics (SPH) method. The analysis results were compared with those obtained from the Lagrange method. Moreover, two types of anchors (stock anchor and stockless anchor), three collision points and two different drop velocities (terminal velocity of each anchor and 5 m/s) were selected to investigate the changes in the responses. Finally, the effect of these parameters (analysis method, anchor type, collision point and drop velocity) on the analysis results was studied. Accordingly, the effectiveness of the SPH method is verified, a safe rock-berm height (over 1 m) is proposed, and a gauge point (0.5 m above the seabed) is suggested for a structural health monitoring implementation.