• 소성∙가공
• /
• 제19권5호
• /
• pp.305-310
• /
• 2010

Recently industry of motor vehicle is making a gradual progress of automotive electric components. According to this step, wire harness equipped at motor vehicle is also increased. The most important component at the wire harness is electric connector. At the manufacturing process of electric connector, exactly at the crimping process, design variables, such as clamping-height, clamping-width and clamping die shape are critical parameters to assure satisfactory harness shape in clamping process of electric connector. In this study we have performed FEM simulation for clamping process and clarified the effect of design variables on compression rate of wire.

• Journal of Plant Biology
• /
• 제36권2호
• /
• pp.177-182
• /
• 1993

The root nodules of Elaeagnus umbellata were coralloid-shape due to repeated dichotomous branching of nodule meristem. The filamentous endophyte with vesicle cluster ranging from 30 ${\mu}{\textrm}{m}$ to 60 ${\mu}{\textrm}{m}$ in diameter was present only in the cortical cells. The isolated endophytes in vitro culture showed typical Frankia morphology, consisting of highly branched hyphae ranging from 0.8 ${\mu}{\textrm}{m}$ to 1.0 ${\mu}{\textrm}{m}$ in diameter, terminal and intrahyphal sporangia varing in shape and size up to 60 ${\mu}{\textrm}{m}$ in length and laminated vesicles. Its infectivity and effectivity were confirmed by induction of nitrogen-fixing root nodules on the inoculated seedlings of two Elaeagnus species. Consequently, the isolate was confirmed as a true symbiont of Elaeagnus umbellata root nodule and named Frankia EuIK1.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 추계학술발표대회
• /
• pp.970-973
• /
• 2007

사용자에게 제공하는 일반적인 텔레매틱스 서비스들은 광역 서비스로 한정되어 있고 특정 관심지점(POI, Point-of-Interest)에 대한 경로와 간략한 안내 서비스만을 제공하고 있다. 그러나 사용자들은 광역 서비스뿐만 아니라 POI 지점의 상세 서비스들도 제공받기를 원한다. 따라서, 각 POI 지점에서의 상세 서비스를 지원하고 이를 관리 제어할 수 있는 텔레매틱스 POI 응용 서비스가 요구되고 있다. 본 논문에서는 POI 지점의 상세 서비스를 제공하기 위하여 GIS 기반 텔레매틱스 POI 응용 서비스를 설계하고 텔레매틱스 POI 단말을 설계/구현한다. 구현된 텔레매틱스 POI 단말은 GPS 모듈로부터 좌표를 수신하고 Shape 뷰어에서 파싱하여 현재위치를 구한다. ESRI Shape 파일 및 DBF 파일을 파싱하여 현재위치와 매칭시킨 후 POI 상세 서비스를 디스플레이 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.199-200
• /
• 2006

It will not be an exaggeration to say that one of the most important features of RT (Rapid Tooling) technology is to easy manufacturing complex shape of cooling channel in injection mold. That is, RT technology is hardly influenced complex shape of tool, Therefore, mold designer can optimize the position and shape of cooling channel whatever they want. In this study, we optimized cooling channel through CAE analysis to solve the problem; prototype-connector-mold applied conventional cooling channel, locally warped by internal stress: The effect of three-dimensional cooling channel was supported by simulation result. But it is impossible to produce injection mold applied three-dimensional cooling channel through machining operation. Therefore, we produced the prototype-connector-mold with three-dimensional cooling channel using Direct Metal Laser Sintering (DMLS) process, and get good-quality prototype-connector without warpage.

• 한국수산과학회지
• /
• 제38권5호
• /
• pp.298-303
• /
• 2005

This study described the reproductive behavior and the morphological development of the larvae and juvenile of the hedgehog seahorse (Hippocampus spinosissimus). Larvae released from male seahorse were reared for 30 days in the laboratory. At the birth, the small flap-like mouth and anus of the yolk-sac larvae were open, and the yolk was completely absorbed within 1 day. The size of newborn larvae ranged 7.01-13.19mm (mean $9.26\pm1.9mm$, n=9) in TL (total length). The larvae had 15-16 pectoral fin rays and 19 dorsal fin rays, but 4 anal fin rays were not completely developed. The larval size ranged 13.38-14.38 mm (mean $13.96\pm0.3mm$, n=6) in TL at 1 day after release, and they had 17 pectoral fin rays, 20 dorsal fin rays and 4 anal fin rays when the larvae reached the juvenile stage. Juvenile size ranged 14.98-16.42mm (mean $15.84\pm0.5mm$, n=5) in TL at 3 days after release, and 1, 4, 6, 8 trunk spines extended quickly. Terminal part of the coronet became a four-forked wedge shape concurrently. Juvenile became 23.25mm (n=l) in TL after 15 days and all 11 trunk rings was connected completely. After 20 days, the juveniles were 24.66-28.65mm (mean $27.26\pm1.6mm$, n=5) in TL, and many melanophores appeared in integument. In the eye lenses, 5-6 lusters were formed. After 30 days, the juveniles were 26.78-28.26 mm (mean $27.36\pm0mm$, n=4)in TL and 8-9 lusters appeared on the eye lenses. Coronet terminal part developed to a five-forked crown-shape completely.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제15권4호
• /
• pp.281-301
• /
• 1993

단일축삭내 HRP 주입기법에 의해 서순응형 치근막 기계적자극수용기에서 오는 일차구심성 신경섬유증 무수축삭에 의해 연결되어 있는 종말지의 시냅양상 및 미세구조에 대한 연구결과는 다음과 같았다. 1. 표식된 stem collateral은 첫 bouton을 형성할 때까지는 수질을 함유하고 있었으며, 그 직경은 약 $0.81-1.38{\mu}m$이었고, 각 terminal bouton은 특징적으로 모두가 무수축삭에 의해 연결되어 있었다. 2. 대부분의 표식 bouton은 dome형태를 나타내었으며, 때때로 길쭉한 모양 혹은 둥근모양의 bouton도 다소 관찰되었으나 scalloped 형태 혹은 glomerulus 형태의 bouton은 전혀 나타나지 않았으며 각 표식 bouton은 균일한 형태 및 크기(직경 $47.60{\pm}3.58{\mu}m$)를 가진 밝은 타원 및 원형의 소포들을 함유하고 있었다. 3. 표식 bouton은 평균직경 $1.15{\pm}0.24{\mu}m$로서 비교적 작았고 평균 $1.11{\pm}0.31$개의 다른 neuronal propile과 시냅스를 이루었는데 그중 단 1개의 neuronal propile과 시냅스를 이루는 것이 89.4%, 2개의 neuronal propile과 시냅스를 이루는 것이 10.6%로서 대단히 단순한 형태의 시냅스를 이루는 것이 특징적으로 나타났으며, 그중 대부분(80.03%)이 dendritic shaft 혹은 spine과만 시냅스를 이루었으며 p-ending과 시냅스를 이루는 것은 6.1%였고 synaptic triad는 전혀 관찰되지 않았다.

• 한국산학기술학회논문지
• /
• 제21권9호
• /
• pp.432-439
• /
• 2020

우리흑돈(Woori black pig, W)은 재래흑돼지와 두록(Duroc, D)을 이용하여 재래흑돼지의 낮은 경제적 특성을 개선시키기 위해 국립축산과학원에서 개발한 신품종이다. 따라서 본 연구는 교배 종료종모돈으로써 우리흑돈이 삼원교잡종의 성장, 체형 및 부분육 생산수율에 미치는 영향을 평가하기 위해 수행되었다. 총 32두의 삼원교잡종을 교배 종료 종모돈에 기반하여 2처리구로 완전임의 배치하였다. 교배 종료종모돈으로 두록과 우리흑돈에 기반한 2개의 다른 삼원교잡종은 LYD[(Landrace×Yorkshire)×Duroc]와 LYW[(Landrace×Yorkshire)×Woori black pig]이였다. 본 연구는 시험 개시 후 53일 동안 수행되었다. 우리흑돈과 두록 종모돈은 삼원교잡종의 53일 체중, 총증체량, 일당증체량 및 90 kg 체중 도달일령에 영향을 미치지 않았다. 체장, 체고 및 흉심에 차이가 발견되지 않았으나, 등지방두께에서 LYD(17.29 mm)와 LYW(18.96 mm) 간의 유의적인 차이가 있었다(p<0.05). LYW 삼원교잡종의 등심수율(13.11%)이 LYD(13.85%)에 비해 유의적으로 낮게 나타났다(p<0.05). LYW의 목심 수율(8.99%)은 LYD(8.21%)에 비해 유의적으로 높게 나타났다(p<0.05). 본 연구결과, 우리흑돈은 삼원교잡종의 사양성적, 체형 및 생산수율에 부정적인 영향을 미치지 않으며, 교배 종료종모돈으로 사용할 수 있을 것으로 사료된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.371-371
• /
• 2009

For the application of superconducting wires to fault current limiting devices, it is required that they have a high rated voltage when a fault occurs. Stabilizer-free coated conductors, particularly, shows a good performance for the high rated voltage, which is beyond 0.6 V/cm. In this study, using the stabilizer-free coated conductors, we made fault current limiting devices and examined their characteristics. Fault current limiting devices were fabricated with a shape of the cylinder of a mono-filar coil winding. Stabilizer-free coated conductors were wound along the mono-filar coil line and the terminal parts between the wire and metal were soldered using In solder. Two kinds of devices were fabricated by a different method in the terminal joint, one was made by a soldering and the other was made by a soldering-free joint. Critical currents and resistance at the joint parts were measured. In addition, long-time current flowing tests were also carried out for the characterization of the fault current limiting devices.

• 한국동물학회지
• /
• 제26권2호
• /
• pp.107-123
• /
• 1983

The globus pallidus of normal cats were prepared for electron microscopic study following perfusion with a mixture of 1% paraformaldehyde and 1% glutaraldehyde solution. Neurons of two size categories were identified in 1 $\\mu$m araldite sections and their ultrastructural characteristics were studied in adjacent thin section. 1. Large neurons ($30 \\mum \\times 45 \\mum$ in diameter) had extensive areas of rough surfaced endoplasmic reticulm, abundant perinuclear Golgi complex, numerous mitochondria and lipofusin granule, and had a large spherical nucleus with shallow indentation of nuclear manbrane. Small neurons ($17 \\mum \\times 27 \\mum$ in diameter) had poorly rough surfaced endoplasmic reticulum, moderate number of mitochondria and randomly distributed Golgi complex. The nuclear envelope of this cell frequently showed multiple deep invagination. 2. Three types of axo-somatic synapses were identified on the basis of the size and shape of vesicle in the axon terminal and the symmetrical or asymmetrical thickening at the synaptic site. Type I synaptic terminal shows an even distribution of round and oval synaptic vesicles, and has a symmetrical synaptic thickening. Type II axon terminals reveal mostly round and pleomorphic vesicles and a few vesicles were localized near the presynaptic membrane in pale axoplasm and its synaptic thickening were symmetric. Type III axon terminals contain round vesicles, which were aggregated in the axoplasm, and has a asymmetrical synaptic thickening. 3. The majority of axo-somatic contact with the large and small neurons were type I, and type II and III synapes were rare.

• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.111-116
• /
• 2020

Flexible tactile sensors, which are primarily used as grippers in robots, are mainly used to handle highly elastic or highly flexible objects. That is, flexible grippers are used when an object cannot be sufficiently controlled by applying a specific output force or taking a specific grabbing action. This is because a flexible tactile sensor needs to measure the pressure applied directly to held objects while deforming according to the shape of the object to be handled. CNT-based sensors used to be made from a highly flexible polymer to give flexibility and it is known that the sensors are greatly affected by the contact resistance of the terminal that connects the sensor to an electrical circuit; therefore, this paper clarifies the contact resistance of MWCNTs-based flexible tactile sensors and terminals. The effects of main and plating materials for terminals are investigated and the combinations of main and plating materials that exhibit contact resistance are measured in a typical industrial environment.