• Smart Structures and Systems
• /
• v.31 no.1
• /
• pp.89-100
• /
• 2023

This paper conducts a parametric study of a new tuned mass damper with pre-strained superelastic SMA helical springs (SMAS-TMD) on the vibration reduction effect. First, a force-displacement relation model of superelastic SMA helical spring is presented based on the multilinear constitutive model of SMA material, and the tension tests of the six SMA springs fabricated are implemented to validate the mechanical model. Then, a dynamic model of a single floor steel frame with the SMAS-TMD damper is set up to simulate the seismic responses of the frame, which are testified by the shaking table tests. The wire diameter, initial coil diameter, number of coils and pre-strain length of SMA springs are extracted to investigate their influences on the seismic response reduction of the frame. The numerical and experimental results show that, under different earthquakes, when the wire diameter, initial coil diameter and number of coils are set to the appropriate values so that the initial elastic stiffness of the SMA spring is between 0.37 and 0.58 times of classic TMD stiffness, the maximum reduction ratios of the proposed damper can reach 40% as the mass ratio is 2.34%. Meanwhile, when the pre-strain length of SMA spring is in a suitable range, the SMAS-TMD damper can also achieve very good vibration reduction performance. The vibration reduction performance of the SMAS-TMD damper is generally equal to or better than that of the classic optimal TMD, and the proposed damper effectively suppresses the detuning phenomena that often occurs in the classic TMD.

• Clinics in Shoulder and Elbow
• /
• v.1 no.1
• /
• pp.66-71
• /
• 1998

The fractures of lateral end of clavicle can be treated by conservative or operative treatment, but many authors report the higher rate of non-union with conservative treatment and that the operative treatment is more effective for the type II fractures. The authors reviewed and analysed 15 cases of lateral end fracture of clavicle which had been treated at Department of Orthopedic Surgery, Kyungpook National University Hospital from 1991 to 1996. The results were as follows; 1. Among the 15 patients, male was 6,female 9 and the average age was 46.2 years ranged from 21 to 72 years. 2. According to the classification by Rockwood, type II a was 8 cases and II b was 7 cases. 3. We treated operatively 12 cases, 9 cases with tension band wiring and 3 cases with intramedul-Iary K-wire fixation. And we treated conservatively 3 cases with Velpeau cast, but I case of nonunion was treated with tension band wiring. 4. The average follow-up was 3.2 years ranged from 2.1 to 4.7 years. 5. The functional results were evaluated with Weitzman's classification. 6. In the operatively treated cases, there were 4 cases(30.7%) in excellent, 7 cases(53.8%) in good and 2 cases(15.3%) in fair result. But, in the conservatively treated cases, there were 2 cases in good and I case in poor result, and the poor case did not united and had open reduction and internal fixation. 7. In conclusion, the operative treatment revealed good functional results in most cases (10/12) and early open reduction and internal fixation was better method than conservative treatment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.805-811
• /
• 2010

When we design a product, we spend a considerable amount of time in designing fasteners and their mating parts. Fasteners have special features because of which they are widely used and well standardized. Although we use some equations to design the fasteners, we should select these fasteners from the standardized table. In order to design them quickly using the CAD system, we proceeded as follows. First, we prepared some standardized shapes of fasteners to design them automatically. Next, we built a database of some fasteners such as a tension bolt, lock wire, thread, pin, and snap ring. Then, we used the design equations to quickly and precisely calculate the various parameters. Finally, we used a configuration design method to generate the shapes automatically using the results of the calculation and the values retrieved from the database. We applied this approach to the design of a propulsion structure, and demonstrated that this approach worked well and saved considerable time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.205-208
• /
• 2002

When establishing the submarine optical fiber table between international and domestic, marine survey in advance it grasps the submarine geological features which is accurate and a depth of water condition. And the route which is safe for selecting and submarine optical fiber cable laying it is a work which secures an ease one location. If also, the PLGR the submarine of optical fiber table root the sea contamination material (rope, wire and net) it removes in advance and if the submarine of the optical fiber cable ease it does to arrive safely. And it is a work the Plough and ROV laying work hour laying work efficiency improvement and laying equipment it will be able to protect. So, This paper presents the monitoring system of ship information management and operation for marine survey and PLGR work in submarine optical fiber table construction enterprise. In order to achieve these purpose, overall serial multi-port communication modulo of configuration, realtime processing for management and operation of receiving data, realtime graph and a printout are described.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.347-352
• /
• 2010

Under harsh environments in which remote control is impossible, wire-guided control technology is effective for controlling distant underwater vehicles that serve mother ships in missions, such as exploration and installation. When the fiber is unwound from the spool, tension fluctuations occur in the fiber because of the relative velocity of the moving vehicles and unwinding velocity of the fiber. As a result, fiber cables exhibit complicated behaviors, become entangled, and may get cut. In this study, a spool-like design for winding tens of kilometers of fiber cables is proposed by analyzing cable winding. The unwinding performance of the designed spool is estimated by performing nonlinear dynamics analysis of the nonlinear behavior and tension fluctuations observed during the unwinding of the fiber.

• Smart Structures and Systems
• /
• v.7 no.4
• /
• pp.303-317
• /
• 2011

A specially designed tendon, which is proposed by embedding an FBG sensor into the center king cable of a 7-wire strand tendon, was applied to monitor the prestress force and load transfer of ground anchor. A series of tensile tests and a model pullout test were performed to verify the feasibility of the proposed smart tendon as a measuring sensor of tension force and load transfer along the tendon. The smart tendon has proven to be very effective for monitoring prestress force and load transfer by measuring the strain change of the tendon at the free part and the fixed part of ground anchor, respectively. Two 11.5 m long proto-type ground anchors were made simply by replacing a tendon with the proposed smart tendon and prestress forces of each anchor were monitored during the loading-unloading step using both FBG sensor embedded in the smart tendon and the conventional load cell. By comparing the prestress forces measured by the smart tendon and load cell, it was found that the prestress force monitored from the FBG sensor located at the free part is comparable to that measured from the conventional load cell. Furthermore, the load transfer of prestressing force at the tendon-grout interface was clearly measured from the FBGs distributed along the fixed part. From these pullout tests, the proposed smart tendon is not only expected to be an alternative monitoring tool for measuring prestress force from the introducing stage to the long-term period for health monitoring of the ground anchor but also can be used to improve design practice through determining the economic fixed length by practically measuring the load transfer depth.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.1
• /
• pp.11-17
• /
• 2024

A seismic structure is an earthquake-resistant design that dissipates seismic energy by equipping the structure with a device called a damper. As research efforts to reduce earthquake damage continue to rise, technology for isolating vibrations in structures has evolved by altering the materials and shapes of dampers. However, due to the inherent nature of the damper, there are an unescapable restrictions on the extent of plastic deformation that occurs in the material to effectively dissipate energy. Therefore, in this study, we proposed a long-life damper that offers semi-permanently usage and enhances structural performance by applying additional tension which is achieved by utilizing super elastic shape memory alloy (SSMA), a material that self-recovers after deformation. To comprehensively understand the behavior of long-life dampers, finite element analysis was performed considering the design variables such as material, wire diameter, and presence of tension, and response behavior was derived to analyze characteristics such as load resistance, energy dissipation, and residual displacement to determine the performance of long-life dampers in seismic structure. Excellence has been proven from finite element analysis results.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.73-85
• /
• 1995

Multi-Vertical Loop Arch Wire(MVLAW) is a kind of appliance for uprighting the mesially inclined posterior teeth axes simultaneously. In this study MVLAW was classified as 3 types by modifing the vertical loop design and named type A, B and C. Each MVLAW was fabricated from .017'x.025' TMA wire and preactivated at the distal end of the open vertical loop with 10 degree tip-back bend(type B has an electric welding stop at the distal end of each loop and type C has no electric welding stop). Type A MVLAW was preactivated at the apex of each open vertical loop with 10 degree tip-back bend(the electric welding stop of type A is positionod at the mesial side of each loop). The aim of the present study was to identify when and which MVLAW is more effective to correct the buccal segment axes simultaneously. The Photoelastic overview of the upper and lower right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows : 1. Higher level compression can be seen clearly at the distal curvature of the lower 1st and 2nd molar when A type MVLAW was applied without short class m elastic, but mild compression cannot be seen at the distal curvature of lower anterior teeth using the class m elastic. 2. Higher concentration was presented at the mesial curvature from the lower 1st premolar to the 2nd molar than the anterior teeth when B type MVLAW without short class III elastic was applied, but using the short class III elastic, higher concentration of compression was presented in the anterior teeth area. 3. Areas of higher compression and tension were not observed at the mesial and distal curvature of the entire 1ower teeth except lower central and lateral incisors in C type MVLAW without short class III elastic, but using the short class III elastic, higher concentration was seen at the mesial curvature of the lower 1st premolar and 1ower anterior teeth.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.775-782
• /
• 1998

The purpose of this study is to investigate the change of the EGFR mRNA expression in the rat gingival epithelium by the experimental tooth movement. We applied reciprocal force between the upper anterior teeth using NiTi open coil spring and stainless steel wire for 1, 2 3, 7 days. For the detection of EGFR mRNA, in situ hybridization was done in the tissue samples which were taken from the pressure and tension sides of teeth. The results were as follows ; 1. The expression of EGFR mRNA was increased application-time dependently. a. Day 1 mild expression on the basal and spinous cell layers b. Day 2 . moderate expression on the whole layers c. Day 3 : severe expression on the basal and spinous cell layers 4. Day 7 severe expression on the whole layers 2. The expression level of EGFR mRNA in the pressure and tension sides were similar during the whole Period of experiment except seven day application at which the cornified layer of the tension side showed moderate expression. 3. Removal of the appliance after 7-day force application lowered the level of EGRF mRNA expression. It was returned to the mild and control (rare) level at three and seven days after the removal, respectively. In conclusion, EFGR mRNA was increased by the experimental tooth movement on the rat ginigval epithelium. Up-regulation of EGFR mRNA in the gingival epithelium can be regarded as responses to the possible changes caused by the physical stersses to the oral environment to maintain the homeostatic conditions of the periodontium.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.123-130
• /
• 2008

Os acromiale is the rare shoulder disease and its treatment is controversial. Despite conservative treatments for 6 months include medication, exercise, physical therapy and subacromial steroid injections, operative treatment for uncontrolled symptomatic Os acromiale is considered the treatment of choice. Operative treatment includes excision, arthroscopic or open reduction and internal fixation with a bone graft. Open reduction with tension band wiring and a bone graft is now the preferred treatment. We experienced 8 patients with symptomatic Os acromiale from March, 2001 to March, 2006. The average patient's age was 45 years and the man and women ratio were 2: 6. All 8 cases of symptomatic Os acromiale of the mesoacromion were treated with open reduction and internal fixation using tension-band wiring. The preoperative ASES($47.3\pm24.4$) and UCLA ($16.6\pm5.8$)scores were improved to $88.8\pm7.3$ and $31.5\pm1.9$, respectively, at the 2 year follow up. The overall UCLA score showed 1 excellent result and 7 good results. We think that symptomatic Os acromiale is a specific disease entity, and open reduction and internal fixation using tension-band wiring with K-wire is a good treatment modality.