• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.164-165
• /
• 2015

Modular construction technique is an adaptation of factory-based mass production concept in ordinary manufacturing industries to construction industry and it assumes that panels, units, etc. are fabricated in factories and assembled in construction sites. Given its structural limitations, modular construction technique is primarily used in low-story buildings whose maximum height is usually five stories, but researchers are actively studying possible adaptation of modular construction technique to high-rise building designs these days as in the case of infill-type modular construction design. Infill-type modular construction technique, most frequently used in high-rise building construction projects, completes frame construction first in reinforced concrete structures and fills unit modules in such structures. However, infill-type modular construction technique leads to longer construction schedule accompanying increase in construction cost, cost overrun due to additional of temporary work, and possible damage to units in the wake of facility construction. Accordingly, this study is performed as a basic study for the development of bottom-up infill-type modular construction technique intended to construct structural frames and fill in units sequentially in a bid to address such drawbacks of current infill-type modular construction technique.

• Structural Engineering and Mechanics
• /
• 제65권5호
• /
• pp.601-609
• /
• 2018

Steel bolts are used in the construction industry for a large variety of applications that range from fixing permanent installations to temporary fixtures. In the past much research has been focused on developing destructive testing techniques to estimate their pull-out load carrying capacity with very little attention to develop non-destructive techniques. In this regards the presented research work details the combined use of ultrasonic pulse velocity and Schmidt hammer tests to identify anchor bolts with faculty installation and to estimate their pull-out strength by relating it to the Schmidt hammer rebound value. From experimentation, it was observed that the load capacity of bolt depends on its embedment length, diameter, bond quality/concrete strength and alignment. Ultrasonic pulse velocity test is used to judge the quality of bond of embedded anchor bolt by relating the increase in ultrasonic pulse transit time to the presence of internal pours and cracks in the vicinity of steel bolt and the surrounding concrete. This information combined with the Schmidt hammer rebound number, R, can be used to accurately identify defective bolts which resulted in lower pull-out strength. 12 mm diameter bolts with embedment length of 70 mm and 50 mm were investigated using constant strength concrete. Pull-out load capacity versus the Schmidt hammer rebound number for each embedment length is presented.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1138-1142
• /
• 2005

The tidal river is a river affected by tide, which causes the water level to rise and fall two times everyday periodically. The local velocity across the river could be very fast because of the cross-sectional characteristics of the river even though it's not a rainy season. Therefore extreme local scour could take place around hydraulic structures such as piers and caissons due to backward flow velocity. For the construction of pier foundation of Ilsan-bridge In the Han River, the field observations were performed to get the velocity and water level. The numerical analysis was performed by HEC-RAS(UNET). The relationship between measured maximum velocity and calculated mean velocity is achieved, which is used to estimate the velocity and water level as the construction is proceeding. Countermeasures for scour were designed with the results of the hydraulic analysis to avoid potential damage during construction work. According to the results of monitoring, the velocity increase after temporary road embankment was negligible, from which it is considered that the degradation of main channel compensated for the constriction of cross-section by embankment.

• 한국사회복지학회:학술대회논문집
• /
• 한국사회복지학회 1999년도 추계학술대회
• /
• pp.187-212
• /
• 1999

Parental leave in Sweden is a part of the health insurance in national social insurance system. It has two kinds of benefits. One is parental cash benefit paid for both husband and wife on the occasion of child birth, currently 450days for each child. The other is temporary parental cash benefit when a child under the age of twelve or a caretaker for him is illness, which is six months for a child a year. Parental insurance in Sweden permits parents to take care of their children just after birth at home with the amount of 80% of monthly income for 360 days and 60 Swedish krone each day for 90 days more. It also permits parents with children under the age of eight of part-time work and return to former job at full-time base when they want. It consequently entourage women's economic activity in her whole life and contributes to promotion of equality in sex roles between husband and wife. This insurance scheme is beneficient in that it enhances individual and family welfare and also secures labour force. This case study on Swedish parental insurance offers implication how to resolve the conflict between women's increased demand for economic activity and maternal role.

• 산업공학
• /
• 제18권4호
• /
• pp.454-464
• /
• 2005

In Postal logistics, the efficient design and operation of transportation network is very important issue. But, it is hard to operate the postal transportation network flexibly according to the change of mail volume. In Korea post, a transportation plan is pre-determined and the transportation of mail is performed through the routes in the plan. When the routes cannot transport all mail, temporary vehicles are used. In the postal transportation, it is important to make a good transportation plan and to manage the plan efficiently. But the change of transportation plan is not a simple work because hundreds of vehicles and persons are related to the plan. So, a methodology to check the effect of the change of the transportation plan in advance is required. In this paper, we develop a simulation model to evaluate the performance of a postal transportation plan. We implement the simulation model and develop an information system including user interface for managing data and simulation results. We apply our simulation model and system to the real change of transportation plan.

• 산업공학
• /
• 제24권2호
• /
• pp.119-127
• /
• 2011

Most companies have been increasing temporary work projects to maximize the usage of their resources. They also have been developing the effective techniques for analyzing and managing the state of the projects. In order to monitor the state of a project in real-time and predict the project's future state more accurately, this paper suggests the Bayesian Network (BN) as a tool for discovering the causes of project risk and presenting the failure probability of the project. The proposed BN modeling method with consideration of the Earned Value Management (EVM) method shows how to induce the predictive and conditional probability of the risk occurrence in the future. The advantages of the suggested model are (1) that the cause of a project risk can be easily figured out via the BN, (2) that the future value of the project can be sufficiently increased by updating relevant components of the project, and (3) that more credible prediction can be made in the similar and future situation by using the data obtained in current analysis. A numerical example is also given.

• 한방안이비인후피부과학회지
• /
• 제19권2호
• /
• pp.168-179
• /
• 2006

Background and Aim : As the aged society is coming, people pay attention to it and the government is also increasing subsidy into the welfare of the aged. As a branch of social welfare, community welfare is familiar and close to local residents. We could open up a new field in community welfare for oriental medicine and oriental medical doctor(OMD). Materials and Method : Analyzing the worts of community welfare center, we tried to find ways for OMDs to take part in there. We focused m community care and home care service of community welfare center and community health center. Result : Free oriental medical services are offered in many places, but a lot of them are temporary and hard to continue due to financial problem and lack of specialist. Local residents want to know about oriental medicine but few OMDs are willing to participate, thereforen, unqualified lectures of such as hand acupuncture, moxibustion, meridian massage prevail among them. This leads to illegal oriental medical services in the name of volunteer medical work. Conclusion The system is needed that local OMD association take part in community welfare of oriental medical service and care with community welfare center and community health center. Local volunteer medical services and researches of medical policy can help increase the chance for OMDs to go into social welfare system of the aged.

• Structural Engineering and Mechanics
• /
• 제17권2호
• /
• pp.245-266
• /
• 2004

Incremental launching method is one of the highly competitive techniques for construction of concrete bridges. It avoids costly and time consuming form work and centralizes all construction activities in a small casting yard, thus saving in cost and time against conventional bridge construction. From the quality point of view, it eliminates the uncertainty of monolithic behaviour by allowing high repetitiveness and industrial environment. But, from analysis and design point of view, the most characteristic aspect of incrementally launched bridges is that, it has to absorb the stresses associated with the temporary supports that are gradually taken on by the deck during its launch. So, it is necessary to analyse the structure for each step of launching which is a tedious and time consuming process. Effect of support settlements or temperature variation makes the problem more complex. By using transfer matrix method, this problem can be handled efficiently with minimal computational effort. This paper gives insight into method of analysis, formulation for optimization of the structural system, effect of support settlement and temperature gradient, during construction, on the stress state of incrementally launched bridges.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권5호
• /
• pp.305-314
• /
• 2020

The paper explores the return migration choice of graduates, which takes place during the transition from higher education to the labor market. Graduate students, after a short time in temporary migration to cities for studying, have to make a decision of returning back home or staying in migration in urban areas for working. Drawing on the mechanism identified in the literature on internal migration, this empirical research tests the effects of two factors: place attractiveness and social supports factors on graduates' decision to return migration to hometown. A binary logit regression analysis was conducted with data from 502 surveyed graduates in Hanoi, Vietnam. The analysis of the motives reported by graduates indicates that return migration decisions cannot be reduced to a single dimension. Perceived attractiveness of a region such as quality of living environment, job opportunities, and social context of individuals positively impact on student' decision to return migration after graduation. The research results imply that, in a collectivistic country like Vietnam, students' choice of future career is strongly influenced by their social context, and choosing a place to work is not simply a matter of earning a higher salary or enjoying better working conditions, but is also related to family issues.

• 한국식품영양학회지
• /
• 제33권3호
• /
• pp.266-278
• /
• 2020

This study was conducted with 375 workers in Changwon to examine the effects of working patterns on dietary habits and health. A self-administered questionnaire was conducted July 22 October 30, 2019. According to the results of the dietary habits and health related factors analysis, non-shift administrative workers showed significantly higher rates of green tea intake (p<0.05), and shift production workers showed significantly higher smoking rates (p<0.001) and waist circumferences (p<0.01). According to the results of the Pearson's correlation coefficient analysis, work hours showed negative correlations with job satisfaction (r=0.22, p<0.01) and positive correlations with perceived stress level (r=0.14, p<0.01). Temporary workers showed negative correlations with feel job satisfaction(r=0.14, p<0.01), perceived stress level (r=0.12, p<0.05), and concern about health (r=0.13, p<0.05). Diabetes showed positive correlations with hypertension (r=0.20, p<0.01), low HDL cholesterolemia (r=0.22, p<0.01), abdominal obesity (r=0.13, p<0.05), and hypertriglyceridemia(r=0.22, p<0.01). Based on these results, this researcher proposes that continuous attention and support of industries and communities are necessary for nutritional education and counseling relative to improving workers' dietary lives as well as disease prevention and control.