• 한국건설순환자원학회논문집
• /
• 제5권1호
• /
• pp.131-138
• /
• 2010

본 연구에서는 보통포틀랜드 시멘트(이하 OPC)제조과정의 분쇄공정 중 밀출구에서 배출되는 비교적 가격이 저렴하면서, 수화열면으로도 효과일 것으로 예상되는 입자분포를 갖는 시멘트(이하 CC)를 대상으로 플라이애시(이하 FA)와 고로슬래그 미분말(이하 BS)를 복합치환하는 3성분계 저발열 시멘트로의 개발 가능성을 검토하기 위하여 유동성, 강도, 간이단열온도 상승량 등 기초적인 특성에 대하여 분석하고자 한다. 실험결과로 유동성은 CC의 치환율이 증가함에 따라 저하하는 경향을 보였고, FA+BS의 치환율이 늘어남에 따라 증가하는 경향을 나타냈다. 공기량은 CC의 치환율이 증가함에 따라 미소하게 감소하는 경향을 나타냈고, FA+BS의 치환율이 증가함에 따라 감소하였다. 응결특성으로 CC 및 FA+BS의 치환율이 증가 할수록 응결 시간은 지연되었다. 간이 단열에 의한 온도 상승량은 전반적으로 CC 치환율이 증가할수록, FA+BS의 치환율이 증가할수록 피크온도는 감소하였고, 이후 온도저하가 완만해 지는 경향을 나타냈다. 압축강도는 CC 및 FA+BS 치환율이 증가할수록 저하하였는데, 재령이 경과함에 따라 장기강도는 Plain과 동등하거나 동등 이상의 강도를 발현 하였다. 종합적으로 CC에 FA+BS를 치환하였을 때 유동성 및 공기량은 저하하는 경향을 나타냈으나, 수화열 면에서 양호한 저감효과를 보여 3성분계 저발열 시멘트로의 개발이 가능성할 것으로 사료된다.

• 한국지반공학회논문집
• /
• 제22권11호
• /
• pp.143-149
• /
• 2006

무단 매립이나 일시 야적으로 환경오염을 유발하는 굴패각을 활용한 친환경 굴패각고화재의 고화성능을 평가하는 일련의 실험연구를 수행하였다. 연구목적은 연약지반개량에 적용하기 위하여 고화재의 고화능력을 평가하고 지반개량 효과를 규명하는 것이다. 이를 위하여 굴패각 고화재 및 시멘트 고화재를 가지고 준설토사에 적용하여 양생기간 및 물/고화재 비를 다르게 변화하면서 일축압축실험을 수행하여 상호 비교하였다. 실내모형 실험을 수행한 결과,굴패 각 고화재는 표층이나 천층 및 심층혼합처리공법으로 연약지반을 개량하는 경우에 시멘트 고화재 보다 고화성능이 우수한 것으로 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제16권2호
• /
• pp.155-164
• /
• 1991

The purpose of this study was to evaluate the effects of bleaching agent through the dentinal tubules of cervical area in the intracoronal bleaching of pulpless teeth on cutured fibroblast cells. Extracted human incisors were enlarged to # 40 K-file and obturated with gutta-perella and AH 26 sealer. The gutta-percha was removed to 2mm below the cementoenamel junction of the root The teeth were divided into 3 experimental and control groups. Experimental groups; Experimental group 1: Temporary inlay wax filld with 30% $H_2O_2$ in pulp cavity. Experimental group 2: Temporary inlay wax filld with 30% $H_2O_2$ in pulp cavity after placement of ZOE cement to cementoenamel junction. Experimental group 3: Temporary inlay wax filld with 30% $H_2O_2$ in pulp cavity after application of Copalite to cementoenamel junction. Control group: Temporary inlay wax filled without 30% $H_2O_2$ in pulp cavity under the same condition at each experimental group. Each tooth was immersed in well of multidish cultured fibroblast cell for 48 hours. The cellular multiplication and cell viability were calculated at the interval of 1, 3, 5. 7 hours and the morphological changes in well were observed and their photographs were taken with inverted microscope. The obtained results were as follows : CD The cellurar multiplicaton and cell viability decreased in all experimental groups at 1 hour after experiment and the morphology of fibroblast cell was changed from star shape to round (2) The cell viability was lowered to 34 % in experemental group 1, 44 % in experimental group 2, and 38 % in experemental group 3 at 3 hours after experiment (3) The cell multiplication was decreased to 54% in experemental group 1. 47% in experimental group 2, and 40% in experemental group 3 at 7 hours after experiment. (4) The decrease of cell number and morphological changes of fibroblast cell were remarkable in experimental group 1, group 3 and 2 in order. These results suggest that the fibroblast cells receive severe damage by 30% $H_2O_2$ solution leaked through the dentinal tubules and the dentinal tubules are able to be obturated better by ZOE cement than by Copalite.

• 한국세라믹학회지
• /
• 제53권4호
• /
• pp.429-434
• /
• 2016

Here, we introduce a means of utilizing waste oyster shells which were obtained from temporary storage near coastal workplaces as $CO_2$ adsorbents. The calcined CaO can be easily dissociated to $Ca^{2+}$ cation and $CO_3{^{2-}}$ anion by hydrolysis and gas-liquid carbonation reaction and converted to precipitated calcium carbonate (PCC) in algae-containing water. The calcium hydroxide and carbonation combination in algae-containing water significantly contributed to improving water quality which is very dependent on the addition amount of calcined powders.

• Clinics in Shoulder and Elbow
• /
• 제25권3호
• /
• pp.202-209
• /
• 2022

Background: The purpose of our study was to investigate short-term outcomes of two-stage reverse total shoulder arthroplasty (RTSA) with an antibiotic-loaded cement spacer for shoulder infection. Methods: Eleven patients with shoulder infection were treated by two-stage RTSA following temporary antibiotic-loaded cement spacer. Of the 11 shoulders, nine had pyogenic arthritis combined with complex conditions such as recurrent infection, extensive osteomyelitis, osteoarthritis, or massive rotator cuff tear and two had periprosthetic joint infection (PJI). The mean follow-up period was 29.9 months (range, 12-48 months) after RTSA. Clinical and radiographic outcomes were evaluated using the visual analog scale (VAS) score for pain, American Shoulder and Elbow Surgeons (ASES) score, subjective shoulder value (SSV), and serial plain radiographs. Results: The mean time from antibiotic-loaded cement spacer to RTSA was 9.2 months (range, 1-35 months). All patients had no clinical and radiographic signs of recurrent infection at final follow-up. The mean final VAS score, ASES score, and SSV were significantly improved from 4.5, 38.6, and 29.1% before RTSA to 1.7, 75.1, and 75.9% at final follow-up, respectively. The mean forward flexion, abduction, external rotation, and internal rotation were improved from 50.0°, 50.9°, 17.7°, and sacrum level before RTSA to 127.3°, 110.0°, 51.8°, and L2 level at final follow-up, respectively. Conclusions: Two-stage RTSA with antibiotic-loaded cement spacer yields satisfactory short-term clinical and radiographic outcomes. In patients with pyogenic arthritis combined with complex conditions or PJI, two-stage RTSA with an antibiotic-loaded cement spacer would be a successful approach to eradicate infection and to improve function with pain relief.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1294-1300
• /
• 2009

Recently, excavations in highly congest urban area have been increased. For the excavations conducted in extremely narrow spaces, we have been developing a novel soil reinforcement system of temporary retaining walls by using deep cement mixing method. The developing method installs largerdiameter ($\Phi$=300~500mm) and shorter reinforcement blocks than previous reinforcement system for mobilizing friction with soils, therefore it has advantages of not only shortening the length of reinforcement system but also reducing the amount of reinforcement. In this study, we performed a numerical analysis of the new reinforcement system by using a commercial finite element program, and evaluated the behavior of the reinforced retaining wall system under various conditions of the length, the diameter, the spacing, and the angle of the reinforcement system.

• 한국산학기술학회논문지
• /
• 제11권12호
• /
• pp.4819-4825
• /
• 2010

치과 진료에 사용되는 세라믹 재료들은 고유존재비에 따라 자연방사성 핵종을 포함하고 있다. 이 방사성 핵종들은 치과 진료를 통하여 세라믹 재료들이 인체에 시술됨에 따라 구강 내에서 내부 방사선 피폭을 일으키게 된다. 본 연구에서는 치과재료 속에 포함된 방사성 핵종에 의해 인체에 영향을 미칠 수 있는 영향을 평가하기 위하여 치과 재료용으로 흔히 사용되는 22종류의 세라믹 재료와 1종류의 temporary resin 및 2종류의 glass ionomer cement에 대하여 전$\beta$ 방사능을 측정하였다. 측정 결과 치과 세라믹 재료의 전$\beta$ 방사능은 1.317 ~ 2.935 Bq/g 이었으며, 세라믹 재료 평균 전$\beta$ 방사능 농도는 2.379 Bq/g이었다. 세라믹 재료 중 전$\beta$ 방사능이 가장 높은 것은 opacious dentine의 code OD-A4로 2.935 Bq/g이었다. Dentine, opacious dentine, translucent 및 enamel의 평균 전$\beta$ 방사능은 각각 2.479 Bq/g, 2.491 Bq/g, 2.470 Bq/g 및 2.069 Bq/g 이었다. Temporary resin과 glass ionomer cement의 전$\beta$ 방사능 농도는 세라믹 재료에 비하여 측정오차범위 내의 무시할 만한 값이었으며, 전$\beta$ 방사능의 준위에 가장 많은 영향을 미치는 방사선동위원소는 40K으로 판단된다. 치과 재료의 방사선 준위에 추가적인 조사와 치과용 재료 내의 방사능 준위를 줄이기 위하여 이에 대한 기준이나 개선방안이 필요할 것으로 사료된다.

• Imaging Science in Dentistry
• /
• 제46권3호
• /
• pp.173-178
• /
• 2016

Purpose: Optical coherence tomography (OCT) has been investigated as a novel diagnostic imaging tool. The utilisation of this equipment has been evaluated through several studies in the field of dentistry. The aim of this preliminary study was to determine through basic experiments the effectiveness of OCT in implant dentistry. Materials and Methods: To assess detection ability, we captured OCT images of implants in each of the following situations: (1) implants covered with mucosae of various thicknesses that were harvested from the mandibles of pigs; (2) implants installed in the mandibles of pigs; and (3) implants with abutments and crowns fixed with temporary cement. The OCT images were captured before cementation, after cementation, and after removing the excess submucosal cement. Results: If the thickness of the mucosa covering the implant body was less than 1 mm, the images of the implants were clearly detected by OCT. In the implants were installed in pigs' mandibles, it was difficult to capture clear images of the implant and alveolar bone in most of the samples. Remnants of excess cement around the implants were visible in most samples that had a mucosa thickness of less than 3 mm. Conclusion: Currently, OCT imaging of implants is limited. Cement remnants at the submucosal area can be detected in some cases, which can be helpful in preventing peri-implant diseases. Still, though there are some restrictions to its application, OCT could have potential as an effective diagnostic instrument in the field of implant dentistry as well.

• 대한치과보철학회지
• /
• 제41권4호
• /
• pp.466-475
• /
• 2003

Statement of problem : In cemented implant-supported porstheses, it is still controversy what kind of cement to use. However, the effect of thermocycling on retentive strength of cemented implant-supported prostheses has not been well investigated. Purpose : This study was tested to evaluate the effects of various cements and thermocycling on retentive strengths of cemented implant-supported prostheses. Material and methods : Prefabricated implant abutments, height 5mm, diameter 6mm, 3-degree taper per side, with light chamfer margins were used. Ten specimens of two-unit fred partial denture were fabricated. The luting agents used for this study were three provisional luting agents which were Temp bond, Temp bond NE, IRM and four permanent luting agents which were Panavia F, Fuji-cem, Hy-bond Zinc cement, Hy-bond Polycarboxylate cement. 24 hours after cementation. the retentive strengths were measured by the universal testing machine with a cross-head speed of 0.5mm/min. Then cementation procedures were repeated and specimens were thermocycled 1000 times at temperature of $5^{\circ}C$ and $55^{\circ}C$. After thermocycling, the retentive strengths were measured. Results : Before thermocycling, the retentive strengths were decreased with the sequence of Panavia F. Fuji-cem. Hy-bond Zinc cement. Hy-bond Polycarboxylate cement, IRM, Temp bond NE and Temp bond, and there were significant differences among each groups(p<0.05). After thermocycling, the retentive strengths were decreased with the sequence of Panavia F. Fuji-cem, Hybond Zinc cement, Hy-bond Polycarboxylate cement, IRM, Temp bond NE and Temp bond, and there were no significant differences among Panavia F, Fuji-cem and Temp bond NE, Temp bond(p>0.05). The retentive strengths before and after thermocycling showed significant differences in Hy-bond Zinc cement. IRM, Temp bond NE and Temp bond(p<0.05). Conclusion : Within the limitation of this study, thermocycling do not affect the retentive strengths of permanent luting agents but the retentive strengths of temporary cements were reduced significantly after thermocyling.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.1-6
• /
• 2016

In this year, Koreans have a shortage in agricultural and drinking water due to severe algal blooms generated in major lakes. Waste oyster shells were obtained from temporary storage near the workplace at which oysters were separated from their shells. Heating ($1000^{\circ}C$ for 1 h in air) was employed to convert raw oyster shell powders into calcium oxide powders that reacted efficiently with phosphorus and nitrogen to remove algal blooms from eutrophicated wastewater. As the dispersed amount of heated oyster shell powders was increased, water clarity and visual light penetration were improved. Coagulation, precipitation and carbonation process of the heated oyster shell powders in a water purifier facilitated removal of eutrophication nutrient such as phosphorus and nitrogen, which is both beneficial and economically viable. $CO_2$ implantation by carbonation treatment not only produced thermodynamically stable CaO in oyster shells to derive precipitated calcium carbonate (PCC) but also accelerated algal removal by activation of coagulation and precipitation process. The use of oyster shell powders led to a mean reduction of 97% in total phosphate (T-P), a mean reduction of 91% in total nitrogen (T-N) and a maximum reduction of 51% in chemical oxygen demand (COD), compared with the total pollutant load of raw algal solution. Remarkable water quality improvement of algal removal by heated oyster shell powders and PCC carbonation treatment will allow utilization as water resources to agricultural or industrial use.