• Title/Summary/Keyword: Temperature hardening

Search Result 624, Processing Time 0.027 seconds

Hardening Properties of Hardener-Free Epoxy-Modified Mortars by Curing Conditions (양생조건에 따른 경화제 무첨가 에폭시수지 혼입 PMM의 경화특성)

  • Lee, Jae-Hwa;Kim, Joo-Young;Kim, Wan-Ki
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2012.11a
    • /
    • pp.255-257
    • /
    • 2012
  • Epoxy resin without any hardener can harden in the presence of hydroxide ions in cement mortars and concretes at ambient temperature. The purpose of present study is to examine the hardening properties of hardener-free epoxy-modified mortars by curing conditions. The hardener-free epoxy-modified mortars using diglycidyl ether of A epoxy resin are prepared with various polymer-cement ratios, and subjected to initial moist/dry curing, initial steam(90℃) curing, initial steam/heat(80℃, 100℃) curing.As a result, degree of hardening of epoxy resin in initial moist/dry cured, initial steam cured and initial steam/heat(80℃) cured hardener-free epoxy-modified mortars is decreased with increasing polymer-cement ratio. However, it is markedly improved with additional dry-curing periods. On the other hand, regardless of the polymer-cement ratio and dry curing periods, degree of hardening of hardener-free epoxy-modified mortars with initial steam/heat(100℃) cure is over 95%.

  • PDF

Total Sugars, $\alpha$-amylase Activity, and Germination after Priming of Normal and Aged Rice Seeds

  • Lee, Suk-Soon;Kim, Jae-Hyeun
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.45 no.2
    • /
    • pp.108-111
    • /
    • 2000
  • Osmoconditioning and hardening effects for the seed germination of normal and naturally aged rice seeds were studied through analyzing the total sugars and $\alpha$-amylase activity. The normal seeds which used to have high germination rate accelerated germination with the osmoconditioning at the suboptimal temperature of 17$^{\circ}C$. On the other hand, the aged seeds did not affect germination rate at $25^{\circ}C$, while increased germination rate and accelerated germination a little at 17$^{\circ}C$, Hardening of aged seeds increased germination rate by 10-15% compared with control seeds at both 17 and $25^{\circ}C$ and accelerated germination. Total sugar content and $\alpha$-amylase activity of normal seeds were higher than did aged seeds. The aged seeds with treatment of osmoconditioning and hardening increased total sugar content and $\alpha$--amylase activity, but hardening was more effective than osmoconditioning. The $\alpha$--amylase activity was positively correlated with the total sugar content and germination rate.

  • PDF

Physical Properties according to Temperature Change of the Cement-Asphalt Mortar for Precast Slab Track (프리캐스트 슬래브 궤도용 시멘트-아스팔트 유제 혼합 모르타르 충전재의 온도변화에 따른 물리적 특성)

  • Oh, Soo-Jin;Lee, Hu-Sam;Jang, Seung-Yup;Jeong, Yong;Jung, Young-Min;Yoon, Seob
    • Proceedings of the KSR Conference
    • /
    • 2007.11a
    • /
    • pp.1273-1278
    • /
    • 2007
  • The cement-asphalt mortar is a mixture of cement and asphalt emulsion, and is utilized as a underpouring materials for the railway track which is used to fill under slab panel space so as to provide a stabilized track support and a tool for reduction of noise and vibration. To increase the workability of grouting, this study investigates the effect of temperature on cement-asphalt mortar by analyzing its physical and mechanical properties before/after hardening according to the temperature (10, 15, 20, 25, $30^{\circ}C$). According to the test results, it is found that as for the physical property of fresh cement-asphalt mortar the more mixture temperature become higher or lower, the more fluidity become worse. But by increasing reducing agent amount and its unit quantity, the required fluidity is met. The compressive strength as physical property of hardened cement-asphalt mortar become lower when temperature is lower but taking it by and large the physical properties of cement-asphalt mortar before/after hardening aren't so affected by temperature and well satisfy the requirement. And it has proved that rate of expansion and freezing and thawing resistance aren't affected by temperature.

  • PDF

Prediction Method of Useful Life of PVC Tape for Wiring Harness (와이어링 PVC 테이프 내구 수명 예측)

  • Kim, Seong-Woo;Jung, Won-Wook;Park, Jong-Koo;Ahn, Mi-Jung
    • Journal of Applied Reliability
    • /
    • v.7 no.4
    • /
    • pp.163-172
    • /
    • 2007
  • Phenomenon, such as hardening, cracking or breaking etc.. of PVC tape for wiring harness by aging were detected on driven automobile in field. Hardening or cracking of PVC tape were confirmed decline of elongation by surrounding stress. The accelerated heat aging test was carried out applying temperature most important factor of aging, and then deduced an equation of useful life using arrhenius model. Prediction method of useful life of PVC tape was developed using miner rule calculating damage value by thermal energy classified temperature by matching deduced equation of useful life and measured temperature value on driven automobile in field.

  • PDF

Quality of Dreid Persimmon to the Pre-treatment and Packaging on Low-temperature (전처리와 포장방법에 따른 곶감의 저온저장시 품질 변화)

  • Park, Hyung-Woo;Lee, Seon-Ah;Cha, Hwan-Soo;Kim, Yoon-Ho
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.11 no.2
    • /
    • pp.87-90
    • /
    • 2005
  • The dried persimmons is produced fungi and develop browning, hardening in circulation at normal temperature. To resolve such problem in commercial value preservation, the research was conducted to measure the quality changes of dreid persimmons depending on pre-treatments and packagings at low temperature ($0^{\circ}C$) during 6 month storage. The rate of weigh loss, fungi, browning, hardening, surface chromaticity were changed a little in the "Cinnamon" pre-treatment and N/LDPE.

  • PDF

High Temperature Deformation Behavior of Ti-Al Intermetallic Compound - Microstructure Effect (TiAl 금속간 화합물의 미세조직에 따른 고온변형특성)

  • 하태권;정재영;이광석;장영원
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2003.05a
    • /
    • pp.295-298
    • /
    • 2003
  • High temperature deformation behavior of a Ti-Al intermetallic compound has been investigated. Specimens with a near gamma and a lamella structures were obtained by performing heat treatment at 1200 and 1330$^{\circ}C$, respectively, for 24 hr and stabilized at 900$^{\circ}C$ for 4 hr followed by air cooling. A series of load relaxation tests has been conducted on these samples at temperatures ranging from 850 to 950$^{\circ}C$ to construct flow curves in the strain rate range from 10$\^$-6//s to 10$\^$-3//s. Strain hardening was observed even at the temperature of 950$^{\circ}C$ in both the near gamma and the lamella structures. Further aging treatment for 12 hr at test temperatures has found to cause no softening in both microstructures.

  • PDF

A Study on the Hardening Characteristics of Alumino-Silicate Inorganic Binder Using Red-Mud according to Curing Temperature (레드머드를 활용한 알루미노 규산염계 무기결합재의 양생온도별 경화특성에 관한 연구)

  • Lee, Yeong-Won;Kang, Suk-Pyo;Lee, Jun;Kim, Jae-Hwan
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2012.05a
    • /
    • pp.259-262
    • /
    • 2012
  • Recently, as the national policy of green growth is promoted, construction field also makes an effort to reduce CO2 gas released when producing cement continuously. In other words, as the method solving environmental pollution and resources exhaustion, lots of mineral material compounds such as blast furnace slag powder which is industrial by-product, fly ash, red mud, etc. are examined to bo used as the substitute good of cement Therefore this study is to investigate the hardening characteristics of alumino-silicate inorganic binder using red-mud used as a accelerator of industrial by-product such as fly ash and blast furnace slag powder according to curing temperature. As a result, it is effective to use red-mud as the accelerator of inorganic binder with other additory accelerators.

  • PDF

A study on formability of AZ31 alloy sheets in square cup deep drawing process at temperature elevated (AZ31 합금의 온간 사각 컵 디프 드로잉 공정에서의 성형성에 관한 연구)

  • Kim M. C.;Lee Y. S.;Kwon Y. N.;Kim S. W.;Lee J. H.
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2005.10a
    • /
    • pp.235-238
    • /
    • 2005
  • In this study, it is investigated that the effect of material properties such as strength coefficient and strain hardening exponent on formability of AZ31 alloy sheet in square cup deep drawing process. Mechanical properties of AZ31 alloy sheet at elevated temperature $250^{\circ}C$ are obtained from uniaxial tensile tests and based on these results, a series of square cup deep drawing tests at the same temperature condition are carried out. Also, the possibilities of necking initiation is predicted by the FEM and FLD and compared with experimental results.

  • PDF

Surface Hardening Technology of the Metal by High Temperature Pulsed Plasma Flux (High Temperature Pulsed Plasma Flux 응용 금속 표면경화 공정기술)

  • 권식철;채병규;이건환;백운승
    • Journal of Welding and Joining
    • /
    • v.19 no.4
    • /
    • pp.375-378
    • /
    • 2001
  • The new development of the surface hardening technology has been attracted to machine designer and materials scientist in the view point of improvement in the lifetime and performance of the machine. The heat-treatment process has been a well-known technology to make harden the metal surface despite of its inefficiency in productivity and its inherent environmental pollution problem. Therefore, the plasma technology has been applied to the conventional process to improve the above issues and become successful in diminishing the ecological harmfulness. However, the drastic short processing time has been sought to increase the productivity by means of new plasma technology so-called, high temperature pulsed plasma flux (HTPPF). The basic principle and features of this HTPPF will be introduced and the present status of this technology will be described in this paper.

  • PDF

Optimal Storage Conditions of the Entomopathogenic Nematode, Steinernema Carpocapsae (곤충병원선충(Steinernema carpocapsae)의 최적보관을 위한 환경요인)

  • 박영진;김용균;이영근;한상천
    • The Korean Journal of Soil Zoology
    • /
    • v.3 no.1
    • /
    • pp.9-16
    • /
    • 1998
  • Effects of temperature, pH, and salt concentration on the preservation of the infective juvenile entolopathogenic nematodes, Steinernema carpocapsae, were analyzed. The effects of acclimation to sublethal low temperature and glycerol concentrations on rapid cold hardening of the nematodes were also evaluated to set up the conditions for their cryopreservation. All tested environmental factors could change the storage effectiveness of the nematodes. These analyses indicated that the optinal storage condition for the nematodes consisted of $15^{\circ}C$, pH 8.5, and 0.5-1.0% salt concentration. The nematodes showed a rapid could hardening in response to $5^{\circ}C$ for 2h. Glycerol induced the nematodes to increase the cold hardiness. Its high concentration over 10%, however, gave a harmful effect on the nematode survival.

  • PDF