• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.671-674
• /
• 2004

BSCCO thin films have been fabricated by epitaxy growth at an ultra-low growth rate. The growth rates of the films was set in the region from 0.17 to 0.27 nm/min. MgO(100) was used as a substrate. In order to appreciate stable existing region of Bi 2212 phase with temperature and ozone pressure, the substrate temperature was varied between 655 and 820 $^{\circ}C$ and the highly condensed ozone gas pressure(PO3) in vacuum chamber was varied between $2.0{\times}10^{-6}$ and $2.3{\times}10^{-5}$ Torr. Bi 2212 phase appeared in the temperature range of 750 and 795 $^{\circ}C$ and single phase of Bi 2201 existed in the lower region than $785\;^{\circ}C$. Whereas, $PO_3$ dependance on structural formation was scarcely observed regardless of the pressure variation. And high quality of c-axis oriented Bi 2212 thin film with $T_c$(onset) of about 90 K and $T_c$(zero) of about 45 K is obtained. Only a small amount of CuO in some films was observed as impurity, and no impurity phase such as $CaCuO_2$ was observed in all of the obtained films.

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.347-355
• /
• 2017

This study investigated how the combined changes in environmental conditions and nitrogen (N) deposition influence the mineralization processes and carbon (C) dynamics of wetland soil. For this objective, we conducted a growth chamber experiment to examine the effects of combined changes in environmental conditions and N deposition on the anaerobic decomposition of organic carbon and the emission of greenhouse gases from wetland soil. A chamber with elevated $CO_2$ and temperature showed almost twice the reduction of total decomposition rate compared to the chamber with ambient atmospheric conditions. In addition, $CO_2$ fluxes decreased during the incubation under the conditions of ambient $CO_2$ and temperature. The decrease in anaerobic microbial metabolism resulted from the presence of vegetation, which influences the litter quality of soils. This can be supported by the increase in C/N ratio over the experimental duration. Principle component analysis results demonstrated the opposite locations of loadings for the cases at the initial time and after three months of incubation, which indicates a reduction in the decomposition rate and an increasing C/N ratio during the incubation. From the distribution between the decomposition rate and gas fluxes, we concluded that anaerobic decomposition rates do not have a significantly positive relationship with the fluxes of greenhouse gas emissions from the soil.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.593-599
• /
• 2000

Accurate quantification of plant physiological properties is often necessary for optimal control of an automated greenhouse production system. Conventional crop growth monitoring systems are usually burdensome, inaccurate, and harmful to crops. A thermal image analysis system was used to accomplish rapid and accurate measurements of physiological-property changes of water-stressed crops. Thermal images were obtained from several species of plants that were placed in a growth chamber. Analyzing the images provided the pattern of temperature changes in a leaf and the amount of differences in the temperature of stressed plants and non-stressed plants.

• Carbon letters
• /
• 제7권4호
• /
• pp.271-276
• /
• 2006

Porous carbon materials were prepared with a thermal treatment of coal tar pitch at 550 in the Ar gas. Growth, merger, and distribution of pore were characterized with scanning electron microscopy as variation ascending temperature gradient and chamber pressure. After graphitizing at the 2600 (1 hr.), walls and connecting parts between pores were investigated with X-ray diffraction patterns. Wall thickness and pore size decreases as increasing ascending temperature gradient, and pore size becomes homogeneous. Graphite quality and thermal conductivity become higher due to the enhanced orientation of walls and connecting parts between pores.

• 한국발생생물학회지:발생과생식
• /
• 제1권2호
• /
• pp.173-180
• /
• 1997

This study has been conducted to investigate the molting behavior and the effects of rearing temperature and day length on molting in the behavior and the effects of rearing temperature and day length on molting in the giant freshwater prawn, Macrobrachium rosenbergii reared in the laboratory. The results obtained were summarized as follow: 1. After pre-spawning molting, the protopodites of 1st, 2nd, 3rd, and 4th except 5th pleopod bore new breeding setae which conserve eggs in the brooding chamber and the basis of 3rd, 4th, and 5th pereiopods bore new breeding dresses which transport the ovulated eggs into the brooding chamber. 2. Adult females reared in 27.5-$29.4^{\circ}C$ molted 10-12 times per year at interval of 27-35 days, of which four or six moltings were common molting for growth and another four or five moltings were pre-spawning molting for spwaning and brooding. In winter season, pre-spawning molting did not happen to most of adult females in spite of the same temperature. 3. Duration of intermolt cycle was 31-38 days and 26-30 days at 25.3- $26.5^{\circ}C$ and 28.7- $30.4^{\circ}C$ of rearing temperature, respectively.

• 한국결정성장학회지
• /
• 제13권4호
• /
• pp.157-164
• /
• 2003

$LaF_{3}$ thin films have been fabricated on Si (100) substrates under the highest possible vacuum condition by pulsed laser deposition (PLD) method. The temperature of the sbustrate varied from $20^{\circ}C$ to $800^{\circ}C$. The films deposited at the higher temperature indicated the sharper peaks in the X-ray diffraction measurement. A highly oriented film was successfully obtained at a substrate temperature of $800^{\circ}C$. The surface observation by the AFM revealed that the many hexagonal structures constructed the film. The XPS analysis revealed that the lacking of F in the film deposited at $600^{\circ}C$ were much more than that in film at $^20{\circ}C$. Adding the adequate amount of $CF_{4}$ gas in the growth chamber can compensate this lacking of F.

• Journal of Biosystems Engineering
• /
• 제17권1호
• /
• pp.55-64
• /
• 1992

The aim of this study was to develop a phytotron for studying the effects of environmental factors such as temperature and humidity on plant growth. This equipment consists of the growth chamber, and the measurement and control system including control algorithms required for optimum operation. As the first step of the study, a temperature and humidity control system was developed. The results of this study are summarized as follows ; 1. Pt-100 was selected to measure temperature and a linearized op-amp circuit was developed for signal conditioning. 2. Pt-100 wet bulb thermometer based on Asmann's principle was developed to measure relative humidity. 3. Temperature and relative humidity conditions were controlled by ON-OFF and PWM operation using a PID controller. And an autotuning algorithm using the characteristics of step response was developed to determine optimal PID constants which were independent of the size of apparatus and environmental factors. 4. Under the ambient temperature of $20^{\circ}C{\sim}25^{\circ}C$, the temperature was kept within the error of ${\pm}0.3^{\circ}C$ in the range of $10^{\circ}C{\sim}40^{\circ}C$, and the relative humidity was kept within the error of ${\pm}5%$ in the range of ${\pm}50%{\sim}90%$.

• 생물환경조절학회지
• /
• 제32권1호
• /
• pp.64-71
• /
• 2023

CAM 식물은 야간에 기공을 열어 CO₂를 흡수하는 식물로 환기하지 않는 야간에 시설 내 발생한 잉여 CO₂를 광합성에 이용할 수 있다. 게발선인장은 다화성으로, 엽상경 수가 많을수록 상품성이 높아진다. 본 연구는 게발선인장의 야간 CO₂ 시비 적용 가능성을 파악하기 위하여 생육 적정 환경인 생육상과 실제 농가의 환경에 따른 온실에서 엽상경별 광합성 특성을 조사하였다. 생육상 내 게발선인장 상위 엽상경은 주간에만 CO₂ 흡수를 하는 C₃ 특성을 보였으며, 2차 엽상경은 주/야간 모두 CO₂ 흡수를 하는 C₃-CAM 특성을 보였다. 온실에서 상위 엽상경은 CO₂ 흡수를 하지 않았으나, 2차 엽상경은 야간에 CO₂ 흡수를 하는 CAM 특성을 보였다. 생육상 내 게발선인장의 기공전도도와 수분이용효율은 온실 내 식물에 비하여 모든 엽상경에서 높은 값을 나타냈다. 게발선인장의 수분이용효율은 생육상과 온실에서 모두 CAM 특성이 나타나는 2차 엽상경에서 상위 엽상경에 비하여 높았다. 일일 총 CO₂ 흡수율은 온실 내 식물에 비하여 생육상 내 식물에서 더 높게 나타났으며, 생육상 내 게발선인장의 2차 엽상경에서 값이 155mmol·m^-2 ·d^-1로 가장 높았다. 게발선인장 '핑크듀'는 성숙한 엽상경에서 야간에 CO₂ 흡수가 활발히 일어나는 CAM 특성을 나타낸다. 다화성으로 시장성이 높은 게발선인장 '핑크듀'는 적정 환경과 성숙한 엽상경에서 효율적인 야간 탄소흡수가 가능한 식물이다.

• 대한기계학회논문집A
• /
• 제31권2호
• /
• pp.253-259
• /
• 2007

A new material tester has been developed to measure mechanical properties of thin film specimens at high temperature. It is useful for observing oxide film growth or local deformation on the surface, and for measuring creep strength. Main characteristics of the tester is as follows; First, high temperature is achieved by Joule heating generated by electricity passing through the specimen, which does not need to enclose the specimen by a furnace or a heating chamber. The exposed specimen enables one to observe the surface during the test. Because the overall size of the test rig is compact, the whole test rig can be placed in a chamber for environmental controlled tests. The loading device is from a level scales. Not only static load with fixed counter weight, but also variable load by moving counter weight controlled remotely can be applied for an ordinary creep test and creep-fatigue test, respectively. The detail of the construction, operation principle, and the specification are described. And also, an example of test result obtained using the creep tester is presented.

• 한국환경과학회지
• /
• 제28권3호
• /
• pp.321-328
• /
• 2019

This study aimed to analyze the growth and physical responsees of Dracaena braunii in response salt accumulation in ornamental water culture and to examine the effect of activated carbon on this growth response. The experiment was conducted in a plant growth chamber and the indoor environmental conditions of the chamber were set at $23{\pm}1^{\circ}C$ temperature, $70{\pm}3%$ humidity, and 1,000 lux brightness. The observation of the growth response of plants in the presence of activated carbon showed that the pH with activated carbon maintained sub-acidic to neutral (6.27~7.32) conditions and showed decreased electric conductivity in the media. As the treatment with added activated carbon showed good growth and physical responses, this indicated that absorption effect of activated carbon had a positive influence on the growth of plants. However, as the absorption effect of activated carbon may decrease over time and the use of high concentrations of activated carbon might cause nutrition shortage, various concentration of activated carbon and their absorption effects need to be investigated in the future.