• Archives of Pharmacal Research
• /
• v.24 no.6
• /
• pp.584-589
• /
• 2001

Isopropryl 2-(1-3-dithiethane-2-ylidene)-2 [N-(4-methyl-thiazole-2-yl) carbamoyl] acetate (YH439) is currently under phase ll clinical trials by the Yuhan Research Center for use as a hepatoprotective agent. Unfortunately, the oral bioavailbility of YH439, which is sparingly soluble in water (i.e., $0.3{\;}\mu\textrm{g}/ml{\;}or{\;}0.91{$\mu}M$ at room temperature), reportedly, is negligibleregardless of the dose administered to rats in the 10-300 mg/kg range. The bioavailability of the compound increased up to 24%, when administered in the form of a micellar solution ($700{\;}\mu\textrm{g}/ml$or 2.1 mM for YH439) at a dose of 10 mg/kg, suggesting that its limited solubility is associated with its negligible bioavailability. In order to obtain additional informmation concerning the bioavailability of YH439, the mechanism(s) involved in gastrointestinal (Gl) absorption were investigated in the present study. For this purpose, the transport of YH430 across a Caco-2 cell monolayer was measured in a $Transwell^{\circledR}$. A permeability of $4.07{\times}10^{-5}{\;}cm/s$ was obtained for the absorptive (i.e., apical to basolateral direction) transport of $0.42{\mu}M$ YH439, implicating that the in vivo Cl absorption is nearly complete. The absorptive transport exhibited a slight concentration-dependency with an intrinsic clearance ($CL_{i}$) of $0.38{\mu}L/{\textrm{cm}^2}/sec$, which accounted for 28.1% of the total intrinsic clearance (i.e., $CL_i$ plus the intrinsic clearance for the linear component) of the transport. Thus, saturation of the absorption process appears to be a minor factor in limiting the bioavailability of the compound. The apparent permeability of YH439 from the basolateral to the apical direction (i.e., efflux, $6.67{\times}10^{-5}{\;}cm/s$) was comparable to that for absorptive transport, but, interestingly, a more distinct concentration-dependency was observed for this transport. However, the efflux does not appear to influence the bioavailability of the compound, as evidenced by the sufficiently high permeability in the absorption direction. Rather, a reportedly extensive first-pass hepatic metabolism appears to be a principal factor in limiting the bioavailability. In this respect, reducing the first-pass metabolism by some means would lead to a higher bioavailability of the compound. Thus, elevation of the absorption rate of YH439 becomes a necessity. From a practical point of view, increasing the concentration of YH439 in the Cl fluid appears to be a feasible way to increase the absorption rate, because the compound is primarily absorbed via a linear mechanism. In summary, the solubilization of YH439, as previously demonstrated for a micellar solution of the compound, appears to be a practical way to increase the oral bioavailability of YH439.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.2
• /
• pp.49-56
• /
• 2018

A novel printable time-temperature integrator (TTI) composed of a natural coloring matter, anthocyanidin, was developed. The anthocyanin was biochemically modified to change in color over week scale, compared to the original anthocyanin over month scale change. The anthocyanin extracted from strawberry was converted to its aglycone, anthocyanidin, by the treatment with ${\beta}-glucosidase$. The print paste was composed of the freeze-dried powder of anthocyanidin, pullulan, glycerol and distilled water, which was screen-printed. The TTI performance were examined in terms of kinetics and temperature dependency. The activation energy of anthocyanidin TTI was 86.92 kJ/mol. Compared with the activation energy of foods, the applicable food groups were found. Applicable food groups were chilled meat products and fish. The major benefits of the TTI were the printability to be practical in use and the eco-friendliness with the natural pigment.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.256-264
• /
• 2011

By implementing an analysis on the liquid flame proof agent infiltration of microwave-heated wood under soaking conditions (room temperature soaking, heat soaking), its correlation with wood temperature, and the structure of wood and permeating components after soaking in flame proof agent, which was carried out as basic research in order to improve the fire resistance performance of the wood itself, it is found that the infiltration increases as the microwave heating time increases, while for heat soaking, it is found that high infiltration as well as the stable permeability of flame proof agent is achievable. Also, when the wood temperature is more than $80^{\circ}C$, the infiltration by the flame proof agent increased, and a very even infiltration of flame proof agent was observed, which implies that the liquid flame proof agent has a dependency on temperature change of the wood as a condition to penetrate into the wood. As a result of fine structure analysis, the flame proof agent transfer between cells through pits was considered as a cause to increase the infiltration of flame proof agent, and it is also shown that for heat soaking among the permeating component analysis, as the crystallized flame proof agent around the heartwood and sapwood inner pits increases, the flame proof agent can penetrate into the the heartwood part.

• Korean Journal of Materials Research
• /
• v.30 no.4
• /
• pp.176-183
• /
• 2020

The high-temperature stability of YSZ specimens fabricated by die pressure and cold isostatic press (CIP) is investigated in CaCl₂-CaF₂-CaO molten salt at 1,150 ℃. The experimental results are as follows: green density 46.7 % and 50.9 %; sintering density 93.3 % and 99.3 % for die press and CIP, respectively. YSZ foremd by CIP exhibits higher stability than YSZ formed by die press due to denseness dependency after high-temperature stability test. YSZ shows peaks mainly attributed to CaZrO₃, with a small t-ZrO₂ peak, unlike the high-intensity tetragonal-ZrO₂ (t-ZrO₂) peak observed for the asreceived specimen. The t-ZrO₂ phase of YSZ is likely stabilized by Y₂O₃, and the leaching of Y₂O₃ results in phase transformation from t-ZrO₂ to m-ZrO₂. CaZrO₃ likely forms from the reaction between CaO and m-ZrO₂. As the exposure time increases, more CaZrO₃ is observed in the internal region of YSZ, which could be attributed to the inward diffusion of molten salt and outward diffusion of the stabilizer (Y₂O₃) through the pores. This results in greater susceptibility to phase transformation and CaZrO₃ formation. To use SOM anodes for the electroreduction of various metals, YSZ stability must be improved by adjusting the high-density in the forming process.

• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.283-292
• /
• 2007

A research projects is currently being conducted to develop a nonlinear finite element analysis methods for predicting the structural behavior of reinforced concrete frame structures, exposed to fire. As part of this, reinforced concrete frames subjected to fire loads were analyzed using the nonlinear finite-element program DIANA. Two numerical steps are incorporated in this program. The first step carries out the nonlinear transient heat flow analysis associated with fire and the second step predicts the structural behavior of reinforced concrete frames subjected to the thermal histories predicted by first step. The complex features of structural behavior in fire conditions, such as thermal expansion, plasticity, cracking or crushing, and material properties changing with temperature are considered. A concrete material model based on nonlinear fracture mechanics to take cracking into account and plasticity models for concrete in compression and reinforcement steel were used. The material and analytical models developed in this paper are verified against the experimental data on simple reinforced concrete beams. The changes in thermal parameters are discussed from the point of view of changes of structure and chemical composition due to the high temperature exposure. Although, this study considers codes standard fire for reinforced concrete frame, any other time-temperature relationship can be easily incorporated.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.95-103
• /
• 2012

Precast concrete method is known to have advantages of minimizing works in the construction, controlling concrete quality easily and saving construction period due to only fabrication work in the construction field, but it needs to apply steam curing to accelerate early concrete strength. In the meanwhile, the oil cost for steam curing has been continuously increased because of political instability in the middle East and international economic shaky. Thus, this study addresses the development of precast/ prestressed concrete which has over 14MPa at 1 day age and specified concrete strength of 40MPa at low temperature, not applying steam curing. Tests were carried out in terms of material characteristics in fresh concrete and compressive strength using 3 types of cement such as Type I, Type III and rapid hardening compound cement. As results of tests, it is found that cements for rapid hardening had disadvantages with respect to slump, slump loss, and air content, but showed higher compressive strength than specified one, especially the highest value when using rapid hardening compound.

• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.23-27
• /
• 2003

The effects of temperature and pH on color deterioration of anthocyanin in Schizandra fruit (Schizandra chinensis fructus) were determined with temperature range of $80{\sim}100^{\circ}C$ and pH range of $2.0{\sim}5.0$. Browning index was used as an index of color deterioration of crude anthocyanin extract from Schizandra fruit. As pH of crude anthocyanin extract was increased, color deterioration was accelerated, showing pH-dependency of thermal stability of anthocyanin extract from Schizandra fruit. Anthocyanin degradation could be modeled as a second-order rate reaction, with rate of $3.2{\times}10^{-3}\;h^{-1}\;(pH\;2.0){\sim}4.1{\times}10^{-3}\;h^{-1}\;(pH\;5.0)\;at\;100^{\circ}C$. Temperature dependence of deterioration was described by the Arrhenius relationship. Activation energies for pH $2.0{\sim}5.0$ ranged from $24.87{\sim}42.54\;kJ/mol^{-1}$.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.329-334
• /
• 1991

The x values and electrical conductivity of the nonstoichiometric compound NbO$_x$ have been measured in a temperature range 700$^{\circ}C$ to 1100$^{\circ}C$ under oxygen partial pressure of 2 ${\times}$ 10$^{-1}$ ∼ 1 ${\times}$ 10$^{-5}$ atm. The NbO$_x$ is a stoichiometrical compound of Nb$_2$O$_5$ under oxygen partial pressure higher than 1.0 ${\times}$ 10$^{-2}$ atm at the above temperature range. The x values were found to vary between 2.48491 and 2.49900 in a temperature range 700$^{\circ}C$ to 1100$^{\circ}C$ under oxygen partial pressure lower than 1 ${\times}$ 10$^{-3}$ atm. The enthalpy of the formation for x' in NbO$_{2.50000-x'}$(${\Delta}H_f$) increased of 15.98 to 17.26 kcal/mol under the conditions. The electrical conductivity (${\sigma}$) of the oxide varied from 10$_4$ to 10$_1$ ohm$_1$cm$_1$ in the above conditions. The activation energy for the conduction was about 1.7 eV. The oxygen pressure dependency of the conductivity (or 1/n value) was about -1/4. The nonstoichiometric conduction mechanism of the oxide has been discussed with the x' values, the ${\sigma}$ values, and the thermodynamic data.

• Journal of the Korean earth science society
• /
• v.30 no.2
• /
• pp.223-233
• /
• 2009

Three-dimensional (3-D) optimally-interpolated sea surface temperature (SST) field was produced by using AQUA/AMSR-E satellite data, and its limitations were described by comparing the temporal average of sea surface temperatures. The 3-D OI (Optimum Interpolation) SST showed a small error of less than $0.05^{\circ}C$ in the central North Pacific, but yielded large errors of greater than $0.4^{\circ}C$ at the coastal area where the satellite microwave data were not available. OI SST composite around pixels with no observation due to heavy rainfall or cloudy pixels had estimation errors of $0.1-0.15^{\circ}C$. Comparison with temporal means showed a tendency that overall OI SSTs were underestimated around heavy cloudy pixels and smoothed out by reducing the magnitude of SST fronts. In the low-latitude areas near the equator, OI SST field produced discontinuity, originated from the window size for the OI procedure. This was mainly caused by differences in the spatial scale of oceanic features. Infernal Rossby deformation radius, as a measure of spatial stale, showed dominant latitudinal variations with O(1) difference in the North Pacific. This study suggests that OI SST methodology should consider latitudinally-varying size of window and the characteristics of spatial scales of oceanic phenomena with substantial dependency on latitude and vertical structure of density.

• 한국해양학회지
• /
• v.22 no.2
• /
• pp.57-62
• /
• 1987

The Markov chain properties of the sea surface temperature (SST) anomalies, namely, the dependency of the monthly SST anomaly on that of the previous month, are studied based on the SST data for 28years(1957-1984) at 5 stations in the southeastern coast of Korea. Wi classified the monthly SST anomalies at each station into the low, the normal and the high state, and computed transition probabilities between SST anomalies of two successive months The standard deviation of SST anomalies at each station is used as a reference for the classification of SST anomalies into 3states. The transition probability of the normal state to remain in the same state is about 0.8. The transition probability of the high or the low states to remain in the same state is about one half. The SST anomalies have almost no probability to transit from the high (the low) state to the low (the high) state. Statistical tests show that the Markov chain properties of SST anomalies are stationary in tine and homogeneous in space. The multi-step Markov chain analysis shows that the 'memory' of the SST anomalies at the coastal stations remains about 3 months.