• Journal of Bio-Environment Control
• /
• v.8 no.1
• /
• pp.19-29
• /
• 1999

This experiment was conducted to compare with the growth and fruit quality of Citrullus lanatus cv. Mudeungsan and Citrullus vulgaris cv. Dalgona grown in fertigation and soilless culture. Seeds were sown on April 16 and transplanted on April 24, 1998. Cultural systems used in fertigation and soilless culture beds using mixed substrate, coir dust (50%) and perlite (50%). In the plot of fertigation system, the number of leaves of cv. Dalgona were increased more than that of cv Mudeungsan, but leaf area shown inversed trend. Plant growth shown greater in soilless culture than those of fertigation culture. In regardless of cultural systems, soluble solid content in fruit was higher in the cv. Dalgona than that of cv. Mudeungsan, but fruit fresh weight was greater in cv. Mudeungsan compare to the cv Dalgona. Nitrate content in petiole sap of watermelon in regardless of cultivars and cultural systems was 11.4∼13.4mg/gFW on 15 days after transplanting, and then increased to 17.1∼20.6mg/gFW on the fruit growth stage. Phosphorous content was 3.7∼5.7mg/gFW in the early growth stage while decreased to 0.6∼1.1mg/gFW from maturing stage to harvesting stage. Potassium content was increased to 5.8∼6.6mg/gFW in the early growth stage while decreased to 4.0∼4.8mg/gFW from pollination stage to harvesting stage. Calcium content in spa petiole of watermelon was higher in soilless culture as 3.4∼4.1mg/gFW than 2.5∼3.5mg/gFW of fertigation culture, but calcium content in fertigation culture during maturing stage was higher than that of soilless culture. The tendency of magnesium uptake was higher in fertigation culture than that of soilless culture, and was similarly absorbed in the range of 0.9∼1.3mg/gFW in regardless of cultural method after pollination. It was demonstrated that cv. Mudeungsan can be adapted to soilless culture and improved the fruit quality. Consequently, hydroponic possibility for year round culture in the greenhouse was recognized.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.191-201
• /
• 2011

Soybean has widely grown for its edible bean which has numerous uses. Microwave remote sensing has a great potential over the conventional remote sensing with the visible and infrared spectra due to its all-weather day-and-night imaging capabilities. In this investigation, a ground-based polarimetric scatterometer operating at multiple frequencies was used to continuously monitor the crop conditions of a soybean field. Polarimetric backscatter data at L, C, and X-bands were acquired every 10 minutes on the microwave observations at various soybean stages. The polarimetric scatterometer consists of a vector network analyzer, a microwave switch, radio frequency cables, power unit and a personal computer. The polarimetric scatterometer components were installed inside an air-conditioned shelter to maintain constant temperature and humidity during the data acquisition period. The backscattering coefficients were calculated from the measured data at incidence angle $40^{\circ}$ and full polarization (HH, VV, HV, VH) by applying the radar equation. The soybean growth data such as leaf area index (LAI), plant height, fresh and dry weight, vegetation water content and pod weight were measured periodically throughout the growth season. We measured the temporal variations of backscattering coefficients of the soybean crop at L, C, and X-bands during a soybean growth period. In the three bands, VV-polarized backscattering coefficients were higher than HH-polarized backscattering coefficients until mid-June, and thereafter HH-polarized backscattering coefficients were higher than VV-, HV-polarized back scattering coefficients. However, the cross-over stage (HH > VV) was different for each frequency: DOY 200 for L-band and DOY 210 for both C and X-bands. The temporal trend of the backscattering coefficients for all bands agreed with the soybean growth data such as LAI, dry weight and plant height; i.e., increased until about DOY 271 and decreased afterward. We plotted the relationship between the backscattering coefficients with three bands and soybean growth parameters. The growth parameters were highly correlated with HH-polarization at L-band (over r=0.92).

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.305-319
• /
• 2000

A total of 50 diatom species and 1 subspecies belonging to 31 genera except Chaetoceros resting spores were identified in the 45 sediments subsampled from a gravity core GH98-1223 collected from the western Hokkaido Island located in the northeastern East Sea (Sea of Japan). The most dominant species is Thalassionema nitzschioides (Grunow) Hustedt, ranging 29 to 59% of the total assemblages, and most species including Denticulopsis seminae (Simonsen and Kanaya) Simonsen and Pseudoeunotia doliolus (Wallich) Grunow were less than 5% in average. Frequencies of cold-water species are generally higher than those of warm-water species and the vertical distribution of cold-water species was largely opposite to that of warm-water species in spite of ecological habitat difference. Frequency of cold-water species, D. seminae is reverse to that of P. doliolus, an indicator of the Tsushima Warm Current, which is consistent with diatom temperature value (T$_{d}$ value). The variation of T$_{d}$ values shows that the upper part of core with greater-than-average T$_{d}$ values represents postglacial warming trend. These T$_{d}$ values clearly demonstrate that the study area located in the northern part of the East Sea is gradually influenced by Tsushima Warm Current. In addition, the zig-zag variation in the lower part reflects the unstable seawater for diatom habitat. Chaetoceros resting spores indicating productivity and upwelling was 5.3 to 40%, with maximum peak at 80 cm. Chaetoceros resting spores/Chaetoceros vegetative cells, an indicator of relative amounts of biogenic material in the sediments was high at the upper 80 cm level, corresponding to the change of T$_{d}$ values. On the basis of diatom assemblages, the northeastern part of East Sea has experienced the effects of Tsushima Warm Current during the postglacial period of Holocene, which is similar to the modem climatic environment. However, the variation of P. doliolus reflects that the intensity of Tsushima Warm Current has been oscillated in the East Sea.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.3
• /
• pp.229-236
• /
• 2008

This experiment was conducted to study on the evaluation of fermentation ability of microbes for whole crop rice silage Inoculant at National Institute of Animal Science, RDA from 2004 to 2005. We collected 28 strains of microbes from whole crop rice silage. According to acidity and growth ability, 5 strains of microbes was isolated (R4-1, R7-1, R7-2, R10-1, R12-1). The cultures of 4 strains were identified to be Lactobacillus plantarum (R4-1, R7-1, R7-2 and R10-1) and one was identified to be Lactobacillus pentosus (R12-1). Whole crop rice was harvested at the yellow ripen stage. It was ensiled in experimental silos (20ℓ capacity) with or without microbial additives (R4-1, R7-1, R7-2, R10-1, R12-1 and three commercial inoculant) and stored at room temperature for 60d. The pH value and acetic acid content of additivetreated silages were lower and lactic acid content was higher than those of the control (p<0.05). There was a trend for acetic acid content to be lowest and lactic acid to be highest in R7-1 treated silage. Crude protein (CP) contents of R7-2 treated silage was higher and acid detergent fiber (ADF) and neutral detergent fiber (NDF) contents of R7-1 treated silage was lower (p<0.05). Although some strains of inoculant could improve silage quality, L. plantarum R7-1 was more effective as an inoculant for whole crop rice silage. This microbe was named NLRI 401 and registered in the Korea Agricultural Culture Collection.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.365-371
• /
• 2013

Purpose: In this study, we evaluated the physical and thermal properties of the compositions made by blending glass fiber (GF) of different contents into glass fiber polyamide-66, and investigated if the compositions applying to the glasses frame to replace the TR-90, which is polyamide-12 resin used as an injection-type spectacle frame material. Methods: To investigate the characteristics change of polyamide-66 (PA-66) compositions with the change of the content of glass fibers, we produced a composition of the content by using a twin-screw extruder. The mechanical strength of the composition production was measured and coating properties as well as cutting processability were evaluated. We evaluated the applicability of the glasses frame by comparison the results of new compositions with characterizations of traditional TR. Results: For the results of the characterization of Polyamide-66/GF composition, we found that the higher increase of content of the glass fiber, the less mold shrinkage rate, and the mechanical strength was increased. Tensile strength increased from $498kg/cm^2$ for 0 wt% of the content of the glass fibers to $849kg/cm^2$ for 30 wt% of the content of the glass fibers. As a result of a coating evaluation, the strength of coating was 4B in the GF 5wt% and 5B, which was extremely good coating characteristics, in the over than GF 5 wt%. Conclusions: In case that 30 wt% of the glass fiber was blended, the mechanical strength was greatly improved, the hardness was increased, injection temperature increased due to increase of the viscosity, and the flow mark of the product may occur. The paint coating of PA-66 blended with glass fiber was all excellent. With general evaluating physical properties and workability properties it was determined that around 10 wt% of the content of the glass fibers was possible to apply a spectacle frame.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.3
• /
• pp.335-365
• /
• 2012

Fission-track (FT) thermochronological records from SE Korean Cretaceous-Paleogene granitic plutons in different fault-bounded blocks reveal contrasting cooling and later thermal histories. Overall cooling patterns are represented by a monotonous (J-shaped) curve in most plutons except some Cretaceous granites retaining a complicated (N-shaped) path due to post-reset re-cooling. Discriminative cooling rates over different temperature ranges can be explained for individual plutons with respect to relative pluton sizes, differences in initial heat loss depending on country rocks, and the presence and proximity of later igneous activity. Even within a single batholith, cooling times for different isotherms were roughly contemporaneous with respect to positions. Insignificant deviations in cooling ages from two different plutons in succession across the Yangsan fault may suggest their contemporaneity before major horizontal fault movement. The extent of later thermal rise recorded locally along the Yangsan and Dongnae fault zones were reached the Apatite Partial Stability Zone ($70-125^{\circ}C$), but did not exceed $200^{\circ}C$. Thermal alteration from fractured zones in the Yangsan-Ulsan fault junction may suggest a thermal reset above $290^{\circ}C$ resulting a complete reset in FT sphene age (31 Ma), caused by a tectonic subsidence in Early Oligocene. A consistency in FT zircon/apatite ages (24 Ma) may imply a sudden rapid cooling over $200-105^{\circ}C$, plausibly related to the abrupt tectonic uplift of the Pohang-Gampo Block including the fault junction in Late Oligocene. A remarkable trend of lower cooling ages for $300-200-100^{\circ}C$ isotherms (i.e., 19% for FT sphene and K-Ar biotite; 20% for FT zircon; 27% for FT apatite) from the east of the Ulsan fault (Pohang-Gampo Block) comparing to the west of the fault may be attributed to retarded cooling times from the Paleogene granites and also reflected by their partially-reduced apatite ages due to later thermal effects.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1611-1618
• /
• 2012

Peeled balloon flower roots and parboiled bracken are pre-processed foodstuffs commonly used in the institutional food service. This study was conducted to establish the suitable manufacturing process for these foodstuffs and the optimal storage condition during distribution in the market. The most suitable manufacturing process was developed by surveying the manufacturing factories that produce these foodstuffs. Samples were collected by selecting a site among the surveyed manufacturing factories and storing them at different temperatures (4, 10, $20^{\circ}C$). The resulting changes in microbiological, physicochemical, and organoleptic qualities depending on the storage period (1, 2, 3, 4, 5, 7, 10 days) were investigated. The number of general bacteria in balloon flower roots at the beginning of the storage period was 5.26 log CFU/g and the number in the $4^{\circ}C$ storage group remained unchanged until the $3^{rd}$ day, but then increased to 7.63 log CFU/g at the $4^{th}$ day, and then gradually increased up to the $7^{th}$ day. However, in the 10 and $20^{\circ}C$ storage groups, the number was rapidly increased to 7.42 log CFU/g and 7.86 log CFU/g, respectively, at the $2^{nd}$ day. The parboiled bracken samples presented a similar trend. For physicochemical quality changes, the pH and hardness were rapidly decreased in the $20^{\circ}C$ storage group. The organoleptic quality was favorably evaluated (5~6 points out of 9 points) up to the $5^{th}$ day in the $4^{\circ}C$ storage group but the overall acceptability was rapidly decreased from the $2^{nd}$ day in the other storage temperature groups. These results confirmed the optimal storage condition for these pre-processed foodstuffs as being less than 3 days at $4^{\circ}C$.

• Journal of Plant Biology
• /
• v.12 no.3
• /
• pp.26-34
• /
• 1969

Through immersing barley seeds (variety; Suwon No. 6) into different dilution of carrier-free P-32 original solution (Total activity; 90mc, To; 3/21) for 24 hours at room temperature, four groups of seeds (each group consists of 200 seeds) having activity levels of 1.6$\times$10-3$\mu$c 32P/grain, 2.3$\times$10-1$\mu$c 32P/grain 6.9$\times$100$\mu$c 32P/grain and 2.5$\times$101$\mu$c 32P/grain respectively, were obtained. To investigate the effects of various activity levels of P-32 absorbed upon the test plants, the seeds were germinated, transplant into the pots, and the growth was observed for three months after germination. After harvest, the inorganic contents in the leaves and the stems were also analyzed. The results: 1) Until four days after the beginning of germination, the rate of germination was found the lowest at the strongest activity level of 2.5$\times$101$\mu$c/grain. At the other P-32 levels treated, it showed generally higher than the control. 2) Before transplanting the seedlings of both 1.6$\times$103$\mu$c/grain and 2.3$\times$10-1uc/grain levels showed more vigorous growth than the control, whereas at the 6.9$\times$100 uc/grain level a retarded growth was conspicuous and all of plants belonging to the highest activity level of 2.5$\times$101$\mu$c/grain were withered owing apparently to the radiation damage. 3) This trend of growth promotion was continnually observed at the low activity levels even after transplanting the seeldings to the pots. As for the plants belonging to 6.9$\times$100$\mu$c/grain level, a clear sign of gradual recovery from the damage afflicted at the earlier stage was observable, and as a result the plants showed more growth than those of control two months after transplanting. 4) The number of stems diverged was found somewhat small in the blocks treated with P-32, compared with that of control until two months after germination. At the later stage of growth there seemed no significant difference among the themselves. 5) The dry weight of leaves and stems was proved that the lower the activity, the mroe it was produced. The relative increase of dry matter in each treatment compared with the control was 2% at 6.9$\times$105$\mu$c/grain level, 9% at 2.3$\times$10-1$\mu$c/grain and 35% at 1.6$\times$10-3$\mu$c/grain respectively. 6) The inorganic contents of the leaves and stems harvested were proved that: (1) Nitrogen was highest at the lowest activity level of 2.3$\times$10-1$\mu$c/grian. (2) Phosphorus showed generally higher contents in the treated blocks than in control, with the peak being at 2.3$\times$10-1$\mu$c/grain. (2) Phosphorus showed generally higher contents in the treated blocks than in contro, with the peak being at 2.3$\times$10-1$\mu$c/grain level in the leaves and at 6.9$\times$100$\mu$c/grain in the stems. (3) These was no significant difference in potassium contents in the leaves between treatment and control, whereas in the stem the treated blocks were higher than control roughly in propotion to the activity level. (4) Calcium in the lesves was richer in treated blocks than control while in the stem no difference was seen. (5) Magnesium contents both in leaves and in stems there was no difference among treatments.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.351-367
• /
• 1995

The elemental geochemistry and oxygen isotopes of illite/smectite (I/S) have been studied in relationship to the mineralogical trend in the Reindeer D-27 well, Beaufort-Mackenzie Basin. The increase in concentrations of $K_2O$, Rb and rare earth elements (REE), the decrease in concentrations of tetrahedral elements such as Mg, Ti, Sc, Zn and Zr, and the increase in concentrations of tetrahedral elements such as Be and V can be related to I/S compositions that vary systematically with depth. Layer formulae of S- and I-layers are estimated as $[Al_{1.57}Fe_{.19}Mg_{.31}Ti_{.07}][Si_{3.84}Al_{.16}]O_{10}(OH)_2$ and $[Al_{1.84}Mg_{.16}][Si_{3.33}Al_{.67}]O_{10}(OH)_2$, respectively. The mobilization of REE appears to occur during illitization. The increase in concentrations of REE, especially La and Ce, with depth is probably linked to incorporation of ions with high valency (e.g. $V^{5+}$) in tetrahedral sites. The excess valency due to V is partly counter-balanced by ions with low valency (e.g. $Be^{2+}$) and, in turn, the local valency deficiency caused by $Be^{2+}$ could be compensated by high-charge interlayer cations such as REE (＋3). ${\delta}^{18}O$ values of I/S range from 2.91 to 15.72‰ (SMOW), and increase with depth, contrasting to trends observed in the Gulf Coast and elsewhere. The increase in ${\delta}^{18}O$ of I/S results from the rapid increase in ${\delta}^{18}O$ of pore water that overcomes the decrease in temperature-dependent fractionation values with increasing burial depth (${\delta}^{18}O_{pore\;water}>-d{\Delta}/_{I/S-water};\;d{\delta}^{18}O_{I/S}>0$). Calculated ${\delta}^{18}O$ values of pore water in equilibrium with I/S suggest that the original water was probably meteoric water. The stratification of pore water is postulated from the presence of an isotopically light interval, about 450m thick. The depth range of the isotopically light zone overlaps, but does not coincide with the interval of lowered I-content and $K_2O$ concentrations, suggesting that oxygens may have been exchanged independently of mineralogical and geochemical reactions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1293-1301
• /
• 2016

Hulled oat (Chohan) and naked oat (Choyang) flours were analyzed according to particle size to investigate nutritional components and physicochemical properties. Particle size of naked oat flours was larger than that of hulled oat flours. As the mesh of the crushed ones decreased, particle sizes increased in value. The content of total ${\beta}$-glucan was highest in hulled oat flour (4.23%) with 60 mesh and in naked oat flour (4.26%) with 100 mesh. Most total ${\beta}$-glucan was soluble ${\beta}$-glucan in both flours (over 76%). Total starch of hulled oat flours (63.64~69.82%) was higher than that of naked oat flours (52.45~63.71%). Whereas amylose contents showed a negative correlation with total starch contents. Contents of free amino acids increased according to particle size, and each component was dependent on each type of amino acid. Moreover, while fatty acid composition was not significant, the content of most naked oats was higher than that of hulled oats. Besides, the ratio of unsaturated fatty acids (oleic acid and linoleate) in both types of oat flours was relatively higher than that of other grains. The pasting properties of peak viscosity, trough, and breakdown showed the highest value in both oats with 100 mesh. Further, the values of final viscosity and the setback were higher with relatively larger particle size. In addition, peak time exhibited a lower value with larger particle size, whereas it showed the opposite value for pasting temperature. Starch digestibility did not show any specific trend according to particle size, whereas expected glycemic index of hulled oats was lower than that of naked oats. Moreover, lower values were investigated at larger particle sizes. The results of this study provide basic useful information for processing of oat products to improve consumption of oats grown in Korea.