• 한국화재소방학회논문지
• /
• 제32권5호
• /
• pp.1-5
• /
• 2018

창문이 설치된 대부분의 공간에서는 커튼을 사용한다. 이러한 커튼은 대부분 가연성 소재이며 수직 설치되어 있기 때문에 화염확대의 중요 요인이다. 따라서 커튼과 같은 가연성 실내장식물의 연소특성에 관한 연구는 화재성상을 예측하는데 있어 매우 중요하다. 본 연구에서는 실내장식재로 널리 사용되는 6종류 커튼의 연소특성을 분석하기 위해 상온과 고온에서의 산소지수를 측정하였다. 실험결과 모든 시료의 고온산소지수는 상온에서보다 약 3~7.5% 낮게 측정되었으며 약 0.2%의 산소농도 차이로도 시료별 연소현상이 큰 차이를 나타냈다. 따라서 가연성 내장재의 산소지수 값으로 난연성을 평가할 경우 고온산소지수 값에 대한 충분한 고려가 있어야 할 것으로 판단된다.

• 기록학연구
• /
• 제31호
• /
• pp.139-161
• /
• 2012

Donald K. Sebera 모델은 다른 열화인자의 영향을 고려하지 않고 오직 온도와 습도만의 변화를 이용하여 두 개 이상의 서고환경에 대한 보존성 평가지수를 계산함으로서 기록물의 보존환경을 정량적으로 비교 평가하는데 활용될 수 있다. 본 연구에서는 Donald K. Sebera 모델을 이용하여 기록물관리법에서 제시하고 있는 온 습도 범위에서 종이기록물 보존조건 중 가장 우수한 조건과 가장 열악한 조건에서의 보존성을 비교 분석하였다. 그 결과 기록물관리법에서 허용하고 있는 온 습도 범위 내에서 보존조건이 가장 우수한 조건에서의 종이기록물 보존성 평가지수가 가장 열악한 조건에서 보다 2.47배 더 큰 것으로 나타났다. 또 가수분해반응 활성화에너지가 작을수록 종이기록물의 보존성은 온도보다는 습도에 의한 영향력이 크게 작용하였다. 따라서 보존성 평가지수는 서고의 온 습도 조건이 기록물 보존환경에 적합한지를 쉽게 판단할 수 있기 때문에 온 습도 변화에 대해 보존성 확보가 가능한 도구로 유용하게 활용될 수 있다.

• 센서학회지
• /
• 제17권4호
• /
• pp.261-266
• /
• 2008

In this paper, we present thermal characteristics of high-temperature measurement sensor using fiber Bragg grating(FBG), including peak reflectivity, FWHM bandwidth and various normalized refractive index change along temperature variation. The temperature stability of FBG temperature sensor can be changed by varying the refractive index change and grating length. The proposed FBG temperature sensor can measure up to about $600^{\circ}C$ and 1000 hours of heating time.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.24.2-24.2
• /
• 2008

We have examined the relative contributions of representative space weather proxies (geomagnetic aa index) to global warming (Global temperature anomaly) and compared them with that of green house effect characterized CO2 content from 1868 to 2005. For this we used Hadcrut3 temperature anomaly (Ta) data, aa index taken at two anti-podal subauroral stations (Canberra Australia and hartland England), and the CO2 data come from historical ice core records. From the comparison between Ta and aa index, we found several interesting results: (1) the linear correlation coefficient between two parameters increases until 1990 and then decreases rapidly, and (2) the scattered plots between two parameters shows different patterns before and after 1990. A partial correlation of Ta and two quantities (aa, CO2) also shows that the geomagnetic effect (aa index) is dominant until about 1990 and the CO2 effect becomes much more important after then. These results imply that the green house effect become very important since at least 1990. For a further analysis, we simply assume that Ta (total) = Ta (aa) + Ta (CO2) and made a linear regression between Ta and aa index from 1868 to 1990. A linear model is then made from the linear regression between energy consumption (a proxy of CO2 effect) and Ta (total) - Ta (aa) since 1990. This linear model makes it possible to predict the temperature anomaly in 2030, about 1 degree higher than the present temperature, which is much larger than in the previous century.

• Environmental Analysis Health and Toxicology
• /
• 제26권
• /
• pp.9.1-9.9
• /
• 2011

Objectives: In order to evaluate which temperature index is the best predictor for the health impact assessment of heat stress in Korea, several indexes were compared. Methods: We adopted temperature, perceived temperature (PT), and apparent temperature (AT), as a heat stress index, and changes in the risk of death for Seoul and Daegu were estimated with $^1{\circ}C$ increases in those temperature indexes using generalized additive model (GAM) adjusted for the non-temperature related factors: time trends, seasonality, and air pollution. The estimated excess mortality and Akaike's Information Criterion (AIC) due to the increased temperature indexes for the $75^{th}$ percentile in the summers from 2001 to 2008 were compared and analyzed to define the best predictor. Results: For Seoul, all-cause mortality presented the highest percent increase (2.99% [95% CI, 2.43 to 3.54%]) in maximum temperature while AIC showed the lowest value when the all-cause daily death counts were fitted with the maximum PT for the $75^{th}$ percentile of summer. For Daegu, all-cause mortality presented the greatest percent increase (3.52% [95% CI, 2.23 to 4.80%]) in minimum temperature and AIC showed the lowest value in maximum temperature. No lag effect was found in the association between temperature and mortality for Seoul, whereas for Daegu one-day lag effect was noted. Conclusions: There was no one temperature measure that was superior to the others in summer. To adopt an appropriate temperature index, regional meteorological characteristics and the disease status of population should be considered.

• 한국환경과학회지
• /
• 제26권12호
• /
• pp.1399-1405
• /
• 2017

We compared the spatial distribution of several heat stress indices (the Wet-Bulb Globe Temperature(WBGT) index, Environmental Stress Index (ESI), and Modified Discomfort Index(MDI)) for the heat wave of June 6~August 26, 2016, in Daegu. We calculated the heat stress indices using data from the high density urban climate observation network in Daegu. The observation system was established in February. 2013. We used data from a total of 38 air temperature observation points (23 thermometers and 18 automatic weather stations). The values of the heat stress indices indicated that the danger level was very high from 0900-2000h in downtown Daegu. The daily maximum value of the WBGT was greater than or equal to $35^{\circ}C$. The differences in the heat stress indices from downtown and rural areas were higher in the daytime than at nighttime. The maximum difference was about 4 before and after 1400h, and the time variations of the heat stress indices corresponded well. Thus, we were able to confirm that the ESI and MDI can be substituted with the WBGT index.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1025-1029
• /
• 2003

We studied the cross-sectional profiles of deformed thermoplastics in hot embossing process and compared with melt flow index for various embossing conditions such as embossing temperature, embossing pressure and initial thickness of the thermoplastics. The fastest embossing times for complete penetration of the cavities were obtained at temperature greater than $60^{\circ}C$ above glass transition temperature (Tg). When the melt flow index of polymer is low, the penetration ratio does not become large even if the embossing pressure increases. The complete occupation of the cavities was easier obtained with high melt flow index polymer than low melt flow index polymer at the same process condition. We believe these results can be very useful for optimizing nanostructured hot embossing also known nanoimprinting process conditions.

• 한국환경과학회지
• /
• 제27권12호
• /
• pp.1261-1269
• /
• 2018

The purpose of this study was to investigate changes in the external thermal environment, following the application of evaporative cooling systems in buildings, in response to climate change. In order to verify changes in the external thermal environment, a T-test was performed on the microclimate, Thermal Comfort Index (TCI), and building surface temperature. Differences in microclimate, following the application of the evaporative cooling system in the building, were significant in terms of temperature and relative humidity. In particular, temperature decreased by more than 7% when the evaporative cooling system was applied. According to the results of the Thermal Comfort Index analysis, the Wet-Bulb Globe Temperature (WBGT) was below the limit of outdoor activities, indicating that outdoor activities were possible. The Universal Thermal Climate Index (UTCI) values were within the very strong heat stress range when the evaporative cooling system was not applied, When the system was applied, the UTCI values were within the strong heat stress range, indicating that they were lowered by one level. The building surface temperature decreased by ~10% or more when the evaporative cooling system was applied, compared to when it was not applied. Finally, the outside surface temperature of the building decreased by ~12% or more when the system was applied, compared to when it was not applied. We conclude that the energy saving effect of the building was significant.

• 한국광학회지
• /
• 제21권5호
• /
• pp.190-194
• /
• 2010

본 연구에서는 측면연마 된 광섬유 브래그 격자를 측면 연마하고 폴리머 상부층(overlay)를 형성시켜 외부 굴절률과 온도를 동시 측정할 수 있는 광섬유 센서 소자를 제안하였다. 외부굴절률 변화에 민감하지 않는 광섬유 브래그 격자를 이용하여 온도를 측정하고 격자를 측면 연마한 후 폴리머 코팅에 의해 소산장 결합을 유도하여 외부 굴절률 변화를 측정하게 된다. 측면 연마된 광섬유 브래그 격자의 온도 민감도는 0.01 nm/oC로 측정되었고 폴리머 상부층의 온도 민감도는 -0.58 nm/oC로 측정되었고 선형구간 별(1.33-1.39, 1.39-1.42, 1.42-1.44) 굴절률 민감도는 498.8 nm/RIU, 694.9 nm/RIU, 1312 nm/RIU로 측정되었다.

• 대기
• /
• 제24권1호
• /
• pp.29-38
• /
• 2014

A characteristic of snowfall and minimum temperature variability in South Korea with respect to the variability of Arctic Oscillation (AO) was investigated. The climatic snowfall regions of South Korea based on daily new fresh snowfall data of 59 Korea Meteorological Administration (KMA) stations data corresponding to the sign of AO index during December to February 1979~2011 were classified. Especially, the differences between snowfalls of eastern regions and that of western regions in South Korea were seen by each mean 1000hPa geopotential height fields, which is one of physical structure, for the selected cases over the East Asia including the Korean Peninsula. Daily minimum temperature variability of 59 KMA station data and daily AO index during the same period were investigated using Cyclo-stationary empirical orthogonal function (CSEOF) analysis. The first CSEOF of wintertime daily AO index and that of minimum temperature of 59 KMA stations explain 33% and 66% of total variability, respectively. Correlation between principal component time series corresponding to the first CSEOF of AO index and that of temperature at the period of 1990s is over about -0.7 when that of AO index leads about 40 days.