• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.33-59
• /
• 2000

Demonstrated uniform MR and resistance across 6 inch wafer, Demonstrated successful integration of MTJ and CMOS, Measured address access time of 8ns and read cycle time of 18ns for 256${\times}$2 arrays at 3.0V using a single transistor and MTJ for a cell

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.4
• /
• pp.273-278
• /
• 2008

This study was carried out in order to test unsaturated hydraulic conductivity estimation of van Genuchten's and Campbell's models using one-step outflow method through Tempe pressure cell. The undisturbed soil cores (columns) were taken from Ap1, B1 and C horizons of Songjeong series (the fine loamy, mesic family of Typic Hapludults). After the saturated hydraulic conductivity Ks of the cores was determined by constant head method, water outflow rate and retentivity of cores were measured in Tempe pressure cell. Fitted curves by models accorded to measured data except for both end of pressure range. In near-saturated condition, measured water retention characteristics showed a relatively better fitness with Campbell's model than van Genuchten's. The soil unsaturated conductivity estimated by Campbell's model was higher than by van Genuchten's. In Ap1 and B1 horizon, the soil unsaturated conductivities obtained by one-step outflow method went between van Genuchten's and Campbell's hydraulic functions, slightly closer to van Genuchten's. In C horizon, van Genuchten's model had better fitness with the one-step outflow data. Consequently, van Genuchten's model generally had better fitness with measured hydraulic conductivity than Campbell's model at the soil water potential range of -10~-75 kPa, especially in C1 horizon. In near-saturated condition, Campbell's model could be thought as relatively accurate hydraulic model, because of the better fitness of Campbell's model with soil water retention data than van Genuchten's model.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.431-441
• /
• 1991

A robust H$_{\infty}$ control design methodology and its application to a Space Station attitude and momentum control problem are presented. This new approach incorporates nonlinear multi-parameter variations in the state-space formulation of H$_{\infty}$ control theory. An application of this robust H$_{\infty}$ control synthesis technique to the Space Station control problem yields a remarkable result in stability robustness with respect to the moments-of-inertia variation of about 73% in one of the structured uncertainty directions. The performance and stability of this new robust H$_{\infty}$ controller for the Space Station are compared to those of other controllers designed using a standard linear-quadratic-regulator synthesis technique.que.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.4
• /
• pp.649-656
• /
• 2002

Fibrinolytic microorganisms were screened from 42 samples of Korean fermented food (7 kinds of Chungook-jang, 14 kinds of commercial Doen-Jang, 5 kinds of home-made Doen-jang, and 16 kinds of Jeot-gal), 15 samples of Japanese fermented food (5 kinds of home-made soybean paste, and 10 kinds of Natto), and 19 samples of Indonesian fermented food (Tempe) as well as starters of Meju (500 microflora from Korea, and 22 from China). Initially, 11 isolates with strong fibrinolytic activity were selected for further characterization. The fibrinolytic activity of the 11 isolates ranged from 89 to 199% of standard plasmin. Four strains, M5l from Korean fermented food (Meju), I 1-1, I 1-4, and I 5-1 from Indonesian fermented food (Tempe), were chosen based on the degree of activity and reproducibility, and identified as Staphylococcus sciuri, Citrobacter or Enterobacter, Enterococcus faecalis, and Bacillus subtilis, respectively. The first two isolates are pathogenic stains while the latter two are considered as GRAS (Generally Recognized As Safe). Fibrinolytic activity of E. faecalis, characterized and designated as BRCA-5, reached a maximum, when the producer was cultivated in Ml7 broth supplemented with 1.0% glucose for 5 h at 37$^{\circ}C$ with shaking at 180 rpm. Compared to commercial fibrinolytic enzymes, the cell-free culture supernatant of 5. faecaiis BRCA-5 showed stronger activity than plasmin and streptokinase, but similar degree of specific activity as nattokinase and urokinase, aud it also demonstrated anticoagulant and antiplatelet activity ex vivo. These features of E. faecalis make it an attractive agent as a biomaterial for health-promoting foods.

• Journal of the Korean Ceramic Society
• /
• v.22 no.6
• /
• pp.80-86
• /
• 1985

Aluminum nitride (AlN) was synthesized from aluminum (Al) powders as a starting material in the tempe-rature range of 450~1, 15$0^{\circ}C$ in the presence of 90% $N_2$-10%$H_2$ gases. The thermogravimentric analysis showed that the nitridation of Al powders started at about 43$0^{\circ}C$ and escalated greatly from 53$0^{\circ}C$. The scanning electron microcopic observation revealed that AlN crystals were different in shape with varying temperature of nitridation. The crystals of AlN which were formed in the lower temperature than the melting point of Al were spherical while those of AlN in the higher temperature were fibrous. The yield of AlN was determined quantitatively by both XRD method and weight gain between before and after the nitridation of Al compacts. It was considered that the former was available for the specimen which was made in the high nitriding temperature. But the latter was unavilable for the same one probably because of the volatile loss of Al in the higher temperature.

• Journal of Information Display
• /
• v.12 no.3
• /
• pp.135-139
• /
• 2011

This paper presents the directly obtained rotational viscosity values of E7, which includes pentylcyanobiphenol, heptylcyanobiphenol, 4-cyano-4'-n-octyloxy-1,1'-biphenyl, and 4-cyano-4"-n-pentyl-1,1',1"-terphenyl, at various tempe using molecular dynamics computer simulation. The director mean squared displacement was achieved from the squared displacement of the mean director using the concept of the mean director of various nematic liquid crystals. The calculated values were compared with the experiment results that predicted a good agreement. Additional points that must be considered for further study are also discussed.

• Journal of the Korean Ceramic Society
• /
• v.33 no.5
• /
• pp.563-571
• /
• 1996

In order to fabricate solid electrolyte CaO-stabilized ZrO2 of high density sintered body economically 13 mol% CaO-stabilized ZrO2 powders were synthesized by the coprecipitation method. The characteristics and sintering behavior of fine powder were investigated. The precipitates has the specific surface area of 193 m2/g and apperaed to be fine and spherical primary particles with a size of approximately 5nm. The crystalliza-tion temperture of CaO-stabilized ZrO2 was 462$^{\circ}C$. The tetragonal phase was stable in the low calcining tempe-rature regions and the cubic zirconia solid solution was formed from above 120$0^{\circ}C$ through an intermediate stage of formation of CaZrO3 By introducing fine powders washed with alcohol and ball-milling process after calcination the sintered body was possible to attain the value of above 92% of the theoretical density at low temperature of 120$0^{\circ}C$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1993.07a
• /
• pp.3-26
• /
• 1993

I have briefly described some of the important advances in hydrosystems and to remark on the important scientific research priorities in hydrological sciences. We have concentrated on data collection systems, real-time control of hydrosystems, global climate change and decision support systems and GIS. In summary, I would like to stress the following points: - the advances in data collection systems, advanced methodologies for interfacion hydrologic, hydraulic, and optimization models through optimal control approaches; and the advances in decision support systems and GIS will allow the interfacing of all these technologies into some sophisticated and much needed tools for operating hydrosystems; - the ability to better understand the hydrologic processes and their relationships to other earth processes is important to understanding and modelling of the hydrologic cycle and its interactions with the ocean-atmosphere system; - and the solution to a better understanding of hydrologic sciences needs to be an international effort such as the GEWEX program briefly discussed above. I would like to thamk each of you for listening to my lecture and to once again thank those responsible for me being here today. Thank you.

• Journal of the Korean Ceramic Society
• /
• v.33 no.7
• /
• pp.809-815
• /
• 1996

When Li2O.2SiO2 glass was crystallized between the temperature of maximum nucleation and the temperature of maximum crystal growth it was found that the control of heating rate had serious effect on the crystallinity and microstructure and the greatly changed physical properties. Density and elastic modulus tends to increase but thermal expansion coefficient decreased with increased crystallinity. When heating rate between the tempe-rature of maximum nucleation and the temperature of maximum crystal growth was 10~5$0^{\circ}C$/hr. crystallinity was increased to result in the increment of strength. When nuclation was done at 44$0^{\circ}C$ for 5 hours and the temperature of crystal growth was held at 575$^{\circ}C$ strength was increased until crystallinity reached 65% and strength was decreased with higher crystallinity. These phenomena could be explained that even for the same crystallinity different heat rates resulted in different number and size of cracks.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.23-30
• /
• 2012

This paper is research results of slope stability analysis associated with seepage infiltration for unsaturated soil in debris-flow occurrence slopes. Site investigations were carried out in two slopes, located at Inje in Kangwon province where debris flow occurred in 2006 and at Yangpyung in Kyeunggi province where it occurred in 2010. For unsaturated soil sampled at the zone of debris-flow initiation, soil water characteristic curves with tempe pressure cells and shear strength parameters with newly designed shear strength apparatus were obtained respectively. The commertially available software SEEP/W was used to analyze seepage infiltration in unsaturated soil, based on their properties obtained from test results and the actual rainfall data at the moment of debris flow occurrence, and slope stability analysis with the program of SLOPE/W, associated with results of seepage analysis, was performed to simulate slope failure. As results of this research, seepage infiltration to unsaturated soil due to intensive rainfall was found to cause increase of ground water table as well as degree of saturation. Through this research slope stability analysis for unsaturated soil, considering the actual rainfall characteristic, might be a reasonable method of investigating characteristics of debris flow behavior, in particular, the moment of debris flow occurrence.