• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.2 s.344
• /
• pp.42-50
• /
• 2006

Owing to the development of semiconductor processing technology, high density complex circuits can be integrated in a System-on-Chip (SoC). However, increasing energy consumption becomes one of the most important limiting factors. Power estimation at the early stage of design is essential, since design changes at lower levels may significantly lengthen the design period and increase the cost. In this paper, logic level circuits ire levelized and several levels are selected to build power model tables for efficient power estimation. The proposed techniques are applied to a set of ISCAS'85 benchmark circuits to illustrate their effectiveness. Experimental results show that significant improvement in estimation accuracy and slight improvement in efficiency are achieved when compared to those of a well-known existing method. The average estimation error has been reduced from $9.49\%\;to\;3.84\%$.

• Environmental and Resource Economics Review
• /
• v.29 no.1
• /
• pp.91-111
• /
• 2020

While the renewable energy portfolio standard (RPS) is in place to expand the scale of renewable energy generation, the power producer can obtain the renewable energy credit (REC) and use it as an incentive to operate the facility. RECs secured by solar power generation can be traded through spot market or fixed price contracts, and, in the spot market trading, power producers are exposed to the uncertainty of REC spot price. In this study, real option analysis is conducted to analyze the optimal threshold of REC spot price for the conversion of REC trading method by power producer considering the uncertainty of REC spot price. We calculated the optimal threshold of REC spot price that can convert the trading method of REC from spot market to fixed price contract. In conclusion, the spot market trading is a rational trading method when considering the uncertainty of REC price, but the fixed price bidding is a rational trading method when not considering the uncertainty of REC price.

• Journal of Advanced Navigation Technology
• /
• v.3 no.1
• /
• pp.20-31
• /
• 1999

In this paper, we have chosen KimPo International Airport as an area for estimating the flutter interference, in order to analyze the flutter interference. The field test at 25 points around KimPo International Airport and the simulation have been performed for estimating the flutter interference. We consider the received power of a direct wave, the height of an antenna, the ERP of a transmitting point, transmit frequency, and the reflection coefficients of an airplane, the transmit/receive point coordinates as estimation functions for the flutter. From the results, we have found that the flutter interference from flights is very serious around the route of flight circumference, and often occurs when the height of an airplane is low, range from 40 to 240 m. Besides, the degree of the flutter interference can be changed according to the distance between an airplane and a transmitting point, elevation angle, and the reflection coefficients of an airplane.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.213-219
• /
• 2010

Recently, a multi-core system is studied for single terminal's operations on various service networks for mobile systems. Therefore, it is expected that mobile systems capable of supporting WCDMA, MC-CDMA, CDMA and WiBro would be developed. Mobile systems for supporting various service networks is able to be implemented on a single chipset via SoC(System one Chip) technology, thus a noble modem design proper for SoC technology is necessary. For high speed data transmission of 4G mobile communication services, OFDM scheme has to be applied. But, an OFDM signal consists of a number of independently modulated subcarriers, and superposition of these subcarriers cause a problem that can give a large PAPR. In this paper, a noble modem design for 4G mobile communication services and PAPR reduction method for solving the PAPR problem are proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.1134-1147
• /
• 1998

Remote management and control system for LMDS wireless CATV network which is being developed at SK Telecom is developed. This system is composed of central control division located at head center and remote units for remote transceivers equipped in base stations and repeaters. It monitors the state of the remote transceivers and controls the operations using PSTN for iterface. Remote transceivers whould be equipped in pairs, and the operations are exchanged automatically in case of emergency situations. the remote units are designed not only to perform commands form central control division, bet to inform emergency situations such as disorder and power failure. This system works well, which is established at Central research center in SK Telecom with remote units such as BTX, PPTX, and PPRX. This system could be utilized in other applications requiring remote control through sligh modifications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.485-487
• /
• 2017

With the growth of the IoT, security is a growing concern. Things the risk of IoT security has been constantly raised, and there have been many cases of hacking. As a result, there is a growing concern and scale about security, but there is a lack of interest and research on the message protocols between Iot devices. With the development of the IoT, the importance of low-power, lightweight and accurate message delivery will become more important and more advanced message protocols will be needed. In this paper, it is aimed to construct the system for communication between client and server of MQTT and CoAP with Confirmative option, which are most used among IoT message protocols and compare the message reliability of each communication protocol to check efficiency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.33-39
• /
• 2002

In mobile communication systems, there are areas where signal coverage is not adequately accomplished by base stations. These areas may be underground parking zones, underground stores, tunnels, and insides of buildings, etc. In these areas, repeaters are broadly used as an economical solution. However, the capacity is decreased as the number of repeaters increases because the noise power that flows to a base station in the reverse link is proportional to the number of repeaters. The reduction of capacity in the reverse link is no longer negligible in the case that several tens or hundreds repeaters are connected to a base station. In this paper, we propose c repeater that is switched off automatically when there is no active user within its coverage. With the switching repeater, we can reduce the unnecessary noise level enhancement when there is no active user within the repeaters coverage. The reverse link capacity of a DS/CDMA system with AOS repeater is analyzed mathematically and compared with that without switching repeater. From the numerical results, noticeable improvement with the switching repeaters is shown.

• Journal of the Optical Society of Korea
• /
• v.2 no.2
• /
• pp.74-79
• /
• 1998

The use of a fiber Fabry-Perot interferometer (FFPI) as an optical current transducer is demonstrated. A conventional inductive pickup coil converts the time-varying current I(t) being measured to a voltage waveform V(t) applied across a piezeolectric strip to which the FFPI is bonded. The strip experiences a longitudinal expansion and contraction, resulting in an optical phase shift ${\phi}(t)$ in the fiber proportional to V(t). This phase shift is measured using a frequency-modulated semiconductor light source, photodiodes to monitor the reflected light from the FFPI and the laser power, and a digital signal processor. Calibration routines compute V(t) and I(t) from the measured phase shift at a l KHz rate. Response to 60 Hz ac over the design range 0-1300A rms is characterized Transient response of the FFPI transducer is also measured.

• The Journal of Information Technology
• /
• v.8 no.1
• /
• pp.11-25
• /
• 2005

The purposes of this study were to explain consumer attitude, expenses and satisfaction of mobile-phone Users. The data of this study used from Pollever.com. This study was satisfaction of mobile-phone users in Korea. The users were consumers of Samsung, LG, SK-Telecom and Pantack. The critical success factor was on the subside for mobile-phone in the growth of mobile service, which we can analyze in its positive effects. Fifty percent of consumers were unsatisfaction with local companies without Samsung. Now most of local mobile-companies will developed music-phone, high-tec camera-phone, hi-slim phone, and health-phone. But, the results of this study are as fallow: Most of consumer' main issues were design, weight, and brand power. It was in that it played the driving force to upgrade the local mobile-phone services into international level with the explosive growth in business by providing cheap phones.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.841-844
• /
• 2001

This paper introduces a new technique for estimating the speed of a mobile station in a wireless system. The proposed method is based on the feature extraction of the received signal envelope. The undecimated discrete wavelet transform via lifting captures local minimum points of the received signal, which is used for the speed estimation. This technique requires neither knowledge of the average received power of the nonstationary signal nor adaptation of a temporal observation window, in contrast to other speed estimators given in the literature. Simulations show that the proposed speed estimator tracks the variable speed of the mobile station.