• Transportation Technology and Policy
• /
• v.7 no.4
• /
• pp.27-36
• /
• 2010

• Journal of the Korean Mathematical Society
• /
• v.28 no.2
• /
• pp.167-182
• /
• 1991

• Resources Recycling
• /
• v.19 no.5
• /
• pp.13-24
• /
• 2010

To investigate the necessity and background of the metal recycling from urban mine resources, 4 bigger problems such as the limitation of the underground resources, consumption of the metal resources, contamination of environment and metal recycling business were reviewed. Waste management and recycling are the foremost issues facing Korea on its path to sustainable development in the 21st century. Especially, metal recycling from urban mines is the most urgent fact for global environment and resources conservation. In order to build a recycling-oriented society, it is necessary to develop the recycling technology, recycling practices and a recycling-oriented economic system.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.3
• /
• pp.17-25
• /
• 1994

This study was carried out to compare the properties of Com-Ply Boards with those of OSBs. These two kinds of boards were made of same flakes. Com-Ply Boards were covered with three different thickness veneers, such as 4mm, 3mm, and 2.5mm. All manufactured Com-Ply Boards and OSBs were 12mm thick. In MOR, all Com-Ply Boards were higher than OSB, and especially 3mm-veneer and 2.5mm-veneer Com-Ply Board were highest. But OSB showed 420kg/$cm^2$. 3mm-veneer Com-Ply Board showed the highest internal bonding 7.0kg/$cm^2$ and then 2.5mm-veneer showed 6.8kg/$cm^2$, and OSB showed 6.6kg/$cm^2$. Screw holding strength showed the high value 23.9kg/$cm^2$, 25.5kg/$cm^2$, and 29.3kg/$cm^2$ respectively at 3mm-veneer, 2.5mm-veneer Com-Ply Board and OSB. Thickness swelling of Com-Ply Boards was lower than that of OSB, but Water absorption of OSB was lower. Finally it was very encouraging that all properties of OSB without veneer, whose cost is higher than flake and whose properties is better, were not worse than those of Com-Ply Board with veneer. It seems That more researches on OSB will be required.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.46-57
• /
• 2007

The leachability of boron in zinc borate (ZB)-modified oriented strandboard (OSB) from southern wood species was investigated in this study. The leaching experiments were conducted by exposing edge-sealed OSB samples under running water at $31^{\circ}C$ for 8, 24, 72, and 216 h. The results from leached samples were compared with those from the unleached controls. Boron leaching of the modified OSB occurred upon the initial water exposure, and the leaching rate decreased as the leaching time increased. Initial boric acid equivalent (BAE) level, wood species, and sample thickness swelling significantly influenced the leachability. There was no consistent effect of polyethylene glycol (PEG) on zinc borate leaching. The glue-line washing within OSB due to thickness swelling of the test samples under water and decomposition of the borate to form water-soluble boric acid were thought to be two possible causes for the observed leaching. The relationship between assayed BAE and leaching time followed a decaying exponential function for zinc borate treated OSB. From the boron/zinc ratio after each leaching period, boron element in ZB was more or less leachable. The material constant of the regression models allowed comparing the leachability of the modified OSB for various wood species. An unified leaching method for treated wood composite materials is needed.

• Journal of the Korean housing association
• /
• v.20 no.5
• /
• pp.1-8
• /
• 2009

Ever-developing information and communications technology has changed the ways of life from that of industrial society to the information-oriented community, and is widely used in a variety of social and economic contexts. Besides, urban problems in today's society are intricately involved so that the possibility of any reliable breakthrough may not to be likely. To work out these complicated problems as well as to understand the crux of the matter more comprehensively, ubiquitous urban planning has been laid out, and as a result attempts to reflect this system are cautiously made in metropolitan areas. However, most u-City planning, integrating uibiquitous technology, has focused on creating urban infrastructure and its services, therefore neglecting the importance of housing in urban space. Consequently, thorough u-City planning has yet to be defined in relation with urban space, and housing planning, established on the basis of the user-oriented housing environment, needs to be urgently made. Centering on the importance of housing in the construction of an improved future urban environment, this study aims to discuss the role of urban environment planning where metropolutan residents can enjoy a comfortable and convenient life. As well, this research paper seeks to focus attention on the consideration for users that is often disregarded but requires reflecting in the u-City planning.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.11-18
• /
• 2004

Asymmetric rolling, in which the circumferential velocities of the upper and lower rolls are different, can give rise to intense plastic shear strains and in turn shear deformation textures through the sheet thickness. The ideal shear deformation texture of fcc metals can be approximated by the <111> // ND and $\{001\}<110>$ orientations, among which the former improves the deep drawability. The ideal shear deformation texture for bcc metals can be approximated by the Goss $\{110\}<001>\;and\;\{112\}<111>$ orientations, among which the former improves the magnetic permeability along the <100> directions and is the prime orientation in grain oriented silicon steels. The intense shear strains can result in the grain refinement and hence improve mechanical properties. Steel sheets, especially ferritic stainless steel sheets, and aluminum alloy sheets may exhibit an undesirable surface roughening known as ridging or roping, when elongated along RD and TD, respectively. The ridging or roping is caused by differently oriented colonies, which are resulted from the <100> oriented columnar structure in ingots or billets, especially for ferritic stainless steels, that is not easily destroyed by the conventional rolling. The breakdown of columnar structure and the grain refinement can be achieved by asymmetric rolling, resulting in a decrease in the ridging problem.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.1
• /
• pp.116-127
• /
• 2004

The objectives of this study are to build up the concept of Environment-Oriented Land Suitability Assessment(EOLSA) and to develop the EOLSA mapping system by applying the EOLSA criteria to the case study area. In order to draw out the EOLSA critera, this study adopted the Delphi method including the experts' awareness survey to urban planners as well as environmental researchers in May and June 2001. As a result, the concept of EPLSA was defined as a process of land use planning to scientifically assess the physical and environmental value of land and to classify conservation aptitude into several grades for the sustainable management of environmental resources. With an outcome of applying the EOLSA criteria with five degrees to the Seoul Metropolitan Area (SMA), Grade I, indicating the highest conservation value, accounted for 57.76% of the SMA. Then, Grade II reached up to 15.06%, Grade III 3.12%, Grade IV 15.92%, and Grade V, the lowest conservation value, 7.99% respectively. And also, the case analysis showed that the share of Grade I area was the highest in Gapyong county and Yangpyong county, Pochon county, Yeonchon county, Yongin city in the order and the lowest in Kwangmyong city, Osan city, Kunpo city, Kuri city, and Buchon city.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.195-201
• /
• 2013

Recently according to increase of enlarged scale ports in conformity with increase in over size vessels and container handling service, pollutants generated from ports are increasing. In advanced countries, reduction in carbon dioxide emission assigned to them has been implemented according to the Climate Change Convention and Kyoto Protocol from 2008 to 2012 in order to lessen carbon dioxide emission. Henceforth increase in discussion on the measure of constructing Green Port and low-carbon port is expected in our nation's field of port as well, it is considered that the effort in reduction with regard to undesirable output which causes environmental problem of analysis target during measuring effectiveness. Therefore, in this study, effectiveness was estimated through directional technology distance function considering undesirable output differently from effectiveness analysis of existing container terminal, and then performed comparative analysis with the result analyzed with BCC output-oriented model. As the result of analysis, in 2007 DMU3 and DMU5, and in 2010 DMU2 and DMU4 appeared to be efficient terminals in BCC output oriented model, and in directional technology distance function model, DMU1, DMU3 in 2007, DMU3, DMU5 in 2008, DMU7 in 2009, and DMU2, DMU5 in 2010 appeared to be efficient terminals.

• International Journal of Computer Science & Network Security
• /
• v.21 no.7
• /
• pp.284-296
• /
• 2021

Quality Models are important element of the software industry to develop and implement the best quality product in the market. This type of model provides aid in describing quality measures, which directly enhance the user satisfaction and software quality. In software development, the inheritance technique is an important mechanism used in object-oriented programming that allows the developers to define new classes having all the properties of super class. This technique supports the hierarchy design for classes and makes an "is-a" association among the super and subclasses. This paper describes a standard procedure for validating the inheritance metric in Quality Model for Object-Oriented Design (QMOOD) by using a set of nine properties established by Weyuker. These properties commonly using for investigating the effectiveness of the metric. The integration of two measuring methods (i.e. QMOOD and Weyuker) will provide new way for evaluating the software quality based on the inheritance context. The output of this research shows the extent of satisfaction of the inheritance metric in QMOOD against Weyuker nine properties. Further results proved that Weyker's property number nine could not fulfilled by any inheritance metrics. This research introduces a way for measuring software that developed using object-oriented approach. The theoretical validation of the inheritance metric presented in this paper is a small step taken towards producing quality software and in providing assistance to the software industry.